hey guys
im having some problems with the pegasus.o module for an ADMtek hpna adapter under
2.4.18. the adapter works under 2.2.18, but for some reason its not working under the
newer usb system.
i get the messages from syslog:
pegasus.c: v0.4.22 (2001/12/07):Pegasus/Pegasus II USB Ethernet driver
usb.c: registered new driver pegasus
hub.c: USB new device connect on bus1/1, assigned device number 2
pegasus.c: eth1: ADMtek AN986 "Pegasus" USB Ethernet (eval. board)
pegasus.c: eth1: link NOT established (0x841) - check the cable.
pegasus.c: link partner stat 0
eth0: Tx error, status 4 (FID=00BF)
eth0: Tx error, status 1 (FID=00E6)
eth0: Tx error, status 1 (FID=00BF)
eth0: Tx error, status 1 (FID=023B)
eth0: Tx error, status 1 (FID=0307)
ive tried the latest usb and pegasus patches as well (
linux-2.4.18-rc2-gregkh-1.patch, usb-pegasus-2.4.18-pre6.patch ) but it hasnt seem to
fix the problem. the link light is ON and the driver loads correctly, but there seems
to be link issues. any insights or could u tell me where to look for more info?
i found this thread on the list archives, but no solution has worked:
http://www.geocrawler.com/mail/thread.php3?subject=%5BLinux-usb-users%5D+Pegasus+II+adapter+not+working+in+2.4.18&list=4563
thanks
-ashkan
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
