Has anyone had a Sony DSC P51 working as a mass storage device? I've
tried PTP (Keeps throwing invalid command errors etc) with jphoto... And
am trying to get it working as a mass stroage device, but although it is
detected at the USB level, the iusb-storage module does nothing with it.
Even though the vendor & deviceid are listed in the unusual devices
include file of the kernel.
Here's the /proc/bus/usb/devices entry
[root@ballbreaker hotplug]# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1860
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 4.10
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
[root@ballbreaker hotplug]#
And the output from my log when I restart hotplug
Aug 21 12:46:07 ballbreaker kernel: usb-uhci.c: $Revision: 1.268 $ time
21:24:13 Mar 27 2002
Aug 21 12:46:07 ballbreaker kernel: usb-uhci.c: High bandwidth mode enabled
Aug 21 12:46:07 ballbreaker kernel: PCI: Found IRQ 5 for device 00:07.2
Aug 21 12:46:07 ballbreaker kernel: usb-uhci.c: USB UHCI at I/O 0x1860,
IRQ 5
Aug 21 12:46:07 ballbreaker kernel: usb-uhci.c: Detected 2 ports
Aug 21 12:46:07 ballbreaker kernel: usb.c: new USB bus registered,
assigned bus number 1
Aug 21 12:46:07 ballbreaker kernel: hub.c: USB hub found
Aug 21 12:46:07 ballbreaker kernel: hub.c: 2 ports detected
Aug 21 12:46:07 ballbreaker kernel: usb-uhci.c: v1.268:USB Universal
Host Controller Interface driver
Aug 21 12:46:07 ballbreaker kernel: hub.c: USB new device connect on
bus1/1, assigned device number 2
Aug 21 12:46:07 ballbreaker kernel: usb.c: USB device 2 (vend/prod
0x54c/0x10) is not claimed by any active driver.
Aug 21 12:46:10 ballbreaker /etc/hotplug/usb.agent: ... no modules for
USB product 0/0/0
Aug 21 12:46:11 ballbreaker /etc/hotplug/usb.agent: ... no modules for
USB product 54c/10/410
Aug 21 12:54:22 ballbreaker kernel: p80211knetdev_hard_start_xmit: Tx
attempt prior to association, frame dropped.
Is there something I'm missing? I know the device doesn't exist in
hotplus config files, but even if I start usb-storage by hand I just get
the following in syslog...
Aug 21 12:56:39 ballbreaker kernel: Initializing USB Mass Storage driver...
Aug 21 12:56:39 ballbreaker kernel: usb.c: registered new driver usb-storage
Aug 21 12:56:39 ballbreaker kernel: USB Mass Storage support registered.
Anyone got any ideas? Do I need to add entries for the device to
/etc/hotplug/usb.usermap (But then how does it work without hotplug?).
Why doesn't usb-storage find my camera & add it as a scsi drive?
TIA
Hamish.
--
I don't suffer from Insanity... | Linux User #16396
I enjoy every minute of it... |
|
http://www.travellingkiwi.com/ |
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
