Hi i am Vassilis , I have a problem whith my usb : Xerox WorkCentreXK35c , a printer and scanner together. I use 2.4.18 kernel ,the problem was the same with 2.2.20 and i have tried 2.4.19 also.The drivers are built in but the same problem when they were modules. I have tried a patch from Georg Acher for the usb.c from SourceForge.net linux-usb-users archieves. It seemed nice to me but didn't help. I thought to change the time limits in hub.c because i saw the time out mesgs : nothing. So i send a list with the boot messages about usb , and the messages when turning on the usb printer. So if you have the time and any ideas ......
****Messages while booting,which i believe to be relative to the subject ***** Jul 2 12:38:04 jamaican kernel: usb.c: registered new driver usbdevfs Jul 2 12:38:04 jamaican kernel: usb.c: registered new driver hub Jul 2 12:38:04 jamaican kernel: uhci.c: USB Universal Host Controller Interface driver v1.1 Jul 2 12:38:04 jamaican kernel: uhci.c: USB UHCI at I/O 0xe400, IRQ 10 Jul 2 12:38:04 jamaican kernel: usb.c: new USB bus registered, assigned bus number 1 Jul 2 12:38:04 jamaican kernel: uhci.c: detected 2 ports Jul 2 12:38:04 jamaican kernel: usb.c: kmalloc IF cbfd1260, numif 1 Jul 2 12:38:04 jamaican kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 Jul 2 12:38:04 jamaican kernel: usb.c: USB device number 1 default language ID 0x0 Jul 2 12:38:04 jamaican kernel: Product: USB UHCI-alt Root Hub Jul 2 12:38:04 jamaican kernel: SerialNumber: e400 Jul 2 12:38:04 jamaican kernel: hub.c: USB hub found Jul 2 12:38:04 jamaican kernel: hub.c: 2 ports detected Jul 2 12:38:04 jamaican kernel: hub.c: standalone hub Jul 2 12:38:04 jamaican kernel: hub.c: ganged power switching Jul 2 12:38:04 jamaican kernel: hub.c: global over-current protection Jul 2 12:38:04 jamaican kernel: hub.c: Port indicators are not supported Jul 2 12:38:04 jamaican kernel: hub.c: power on to power good time: 2ms Jul 2 12:38:04 jamaican kernel: hub.c: hub controller current requirement: 0mA Jul 2 12:38:04 jamaican kernel: hub.c: port removable status: RR Jul 2 12:38:04 jamaican kernel: hub.c: local power source is good Jul 2 12:38:04 jamaican kernel: hub.c: no over-current condition exists Jul 2 12:38:04 jamaican kernel: hub.c: enabling power on all ports Jul 2 12:38:04 jamaican kernel: usb.c: hub driver claimed interface cbfd1260 ...... .......... .............. Jul 2 12:38:04 jamaican kernel: uhci.c: root-hub INT complete: port1: 58a port2: 48a data: 6 Jul 2 12:38:04 jamaican kernel: uhci.c: e400: suspend_hc Jul 2 12:38:04 jamaican kernel: hub.c: port 1 connection change Jul 2 12:38:04 jamaican kernel: hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s Jul 2 12:38:04 jamaican kernel: hub.c: port 2 connection change Jul 2 12:38:04 jamaican kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Jul 2 12:38:04 jamaican kernel: uhci.c: root-hub INT complete: port1: 588 port2: 488 data: 6 Jul 2 12:38:04 jamaican kernel: hub.c: port 1 enable change, status 300 Jul 2 12:38:04 jamaican kernel: hub.c: port 2 enable change, status 100 ...... ........... .................. Jul 2 12:38:06 jamaican kernel: parport0: PC-style at 0x378 [PCSPP,TRISTATE] Jul 2 12:38:06 jamaican kernel: lp0: using parport0 (polling). Jul 2 12:38:06 jamaican kernel: lp0: console ready Jul 2 12:38:06 jamaican kernel: lp0: compatibility mode ***Messages while turning on the usb printer,scanner***** Jul 2 12:39:47 jamaican kernel: uhci.c: e400: wakeup_hc Jul 2 12:39:47 jamaican kernel: uhci.c: root-hub INT complete: port1: 580 port2: 493 data: 4 Jul 2 12:39:47 jamaican kernel: hub.c: port 2 connection change Jul 2 12:39:47 jamaican kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s Jul 2 12:39:47 jamaican kernel: hub.c: port 2, portstatus 103, change 0, 12 Mb/s Jul 2 12:39:47 jamaican kernel: hub.c: USB new device connect on bus1/2, assigned device number 2 Jul 2 12:39:51 jamaican kernel: usb_control/bulk_msg: timeout Jul 2 12:39:51 jamaican kernel: uhci.c: uhci_result_control() failed with status 440000 Jul 2 12:39:51 jamaican kernel: [cbfd20f0] link (0bfd2062) element (0bfd31e0) Jul 2 12:39:51 jamaican kernel: 0: [cbfd31e0] link (0bfd3210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=09798200) Jul 2 12:39:51 jamaican kernel: 1: [cbfd3210] link (0bfd3240) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0b136ec0) Jul 2 12:39:51 jamaican kernel: 2: [cbfd3240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000) Jul 2 12:39:51 jamaican kernel: Jul 2 12:39:51 jamaican kernel: uhci.c: uhci_result_control() failed with status 440000 Jul 2 12:39:51 jamaican kernel: [cbfd20c0] link (0bfd2062) element (0bfd31e0) Jul 2 12:39:51 jamaican kernel: 0: [cbfd31e0] link (0bfd3210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=09798200) Jul 2 12:39:51 jamaican kernel: 1: [cbfd3210] link (0bfd3240) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0b136ec0) Jul 2 12:39:51 jamaican kernel: 2: [cbfd3240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000) Jul 2 12:39:51 jamaican kernel: Jul 2 12:39:51 jamaican kernel: uhci.c: uhci_result_control() failed with status 440000 Jul 2 12:39:51 jamaican kernel: [cbfd20f0] link (0bfd2062) element (0bfd31e0) Jul 2 12:39:51 jamaican kernel: 0: [cbfd31e0] link (0bfd3210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=09798200) Jul 2 12:39:51 jamaican kernel: 1: [cbfd3210] link (0bfd3240) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0b136ec0) Jul 2 12:39:51 jamaican kernel: 2: [cbfd3240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000) Jul 2 12:39:51 jamaican kernel: Jul 2 12:39:51 jamaican kernel: uhci.c: uhci_result_control() failed with status 440000 Jul 2 12:39:51 jamaican kernel: [cbfd20c0] link (0bfd2062) element (0bfd31e0) Jul 2 12:39:51 jamaican kernel: 0: [cbfd31e0] link (0bfd3210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2, PID=2d(SETUP) (buf=09798200) Jul 2 12:39:51 jamaican kernel: 1: [cbfd3210] link (0bfd3240) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=2, PID=69(IN) (buf=0b136ec0) Jul 2 12:39:51 jamaican kernel: 2: [cbfd3240] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2, PID=e1(OUT) (buf=00000000) Jul 2 12:39:51 jamaican kernel: Jul 2 12:39:51 jamaican kernel: usb.c: USB device not responding, giving up (error=-110) Jul 2 12:39:51 jamaican kernel: hub.c: port 2, portstatus 103, change 0, 12 Mb/s Jul 2 12:39:51 jamaican kernel: hub.c: USB new device connect on bus1/2, assigned device number 3 Jul 2 12:39:51 jamaican kernel: uhci.c: uhci_result_control() failed with status 440000 Jul 2 12:39:51 jamaican kernel: [cbfd20c0] link (0bfd2062) element (0bfd31e0) Jul 2 12:39:51 jamaican kernel: 0: [cbfd31e0] link (0bfd3210) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=09798200) Jul 2 12:39:51 jamaican kernel: 1: [cbfd3210] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 2 12:39:51 jamaican kernel: Jul 2 12:39:51 jamaican kernel: usb.c: USB device not accepting new address=3 (error=-110) THANK U (not a message this one) ------------------------------------------------------- In remembrance www.osdn.com/911/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
