Mark C wrote:
> [root@stimpy mark]# dd if=/dev/sda of=tmp/tmp.img skip=50 \
> bs=1k
> dd: reading `/dev/sda': Input/output error
That's correct.
> Then the output of dmesg:
>
> SCSI device (ioctl) reports ILLEGAL REQUEST.
> SCSI device sda: 16384 512-byte hdwr sectors (8 MB)
> sda: test WP failed, assume Write Enabled
> sda: I/O error: dev 08:00, sector 0
> I/O error: dev 08:00, sector 0
> unable to read partition table
> I/O error: dev 08:00, sector 96
That's what I expected. I didn't help.
Sector 96 is a little odd. 50 1K blocks
should be sector 99. (counting starts at zero)
I wonder why 96 is accessed...
This is really starting to look like it's
*NOT* really a Mass Storage Class device,
just claiming to be. (black list time?)
I noticed the windows driver setup several
other interfaces, like audio and VfW (video).
Best sugestion for now is buy 1) a memory card,
2) a card reader that works there are several.
It probably doesn't use the internal memory if a card
is loaded, but you'd have to read the manul/test to
find out. 8M isn't much room for pics at 1280x1024
any way :)
-Thomas
-------------------------------------------------------
This SF.NET email is sponsored by: AMD - Your access to the experts
on Hammer Technology! Open Source & Linux Developers, register now
for the AMD Developer Symposium. Code: EX8664
http://www.developwithamd.com/developerlab
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
