Hello,
Below is a kernel log from the following scenario: device is plugged in - wait a few seconds - device is plugged out As you can see, device failed to connect. However, before 2.4.19preX the same device was connecting ok. Any ideas? I am using usb-uhci (although uhci also doesn't work). Chipset is VIA KT266A if that matters... Device has PDIUSBD11N controller chip from Phillips. Sep 18 13:16:32 equinoxe kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s Sep 18 13:16:32 equinoxe kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s Sep 18 13:16:32 equinoxe kernel: hub.c: port 2 connection change Sep 18 13:16:32 equinoxe kernel: hub.c: port 2, portstatus 101, change 1, 12 Mb/s Sep 18 13:16:32 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:33 equinoxe last message repeated 4 times Sep 18 13:16:33 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:34 equinoxe last message repeated 7 times Sep 18 13:16:34 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:34 equinoxe last message repeated 3 times Sep 18 13:16:34 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:35 equinoxe last message repeated 7 times Sep 18 13:16:35 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:35 equinoxe last message repeated 4 times Sep 18 13:16:36 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:36 equinoxe last message repeated 6 times Sep 18 13:16:36 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:37 equinoxe last message repeated 4 times Sep 18 13:16:37 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:38 equinoxe last message repeated 7 times Sep 18 13:16:38 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:38 equinoxe last message repeated 4 times Sep 18 13:16:38 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:39 equinoxe last message repeated 6 times Sep 18 13:16:39 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:39 equinoxe last message repeated 4 times Sep 18 13:16:40 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:40 equinoxe last message repeated 7 times Sep 18 13:16:40 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:41 equinoxe last message repeated 3 times Sep 18 13:16:41 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:42 equinoxe last message repeated 7 times Sep 18 13:16:42 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:42 equinoxe last message repeated 4 times Sep 18 13:16:42 equinoxe kernel: hub.c: port 2, portstatus 101, change 3, 12 Mb/s Sep 18 13:16:43 equinoxe last message repeated 6 times Sep 18 13:16:43 equinoxe kernel: hub.c: port 2, portstatus 100, change 3, 12 Mb/s Sep 18 13:16:43 equinoxe last message repeated 3 times Sep 18 13:16:44 equinoxe kernel: hub.c: port 2, portstatus 100, change 2, 12 Mb/s Sep 18 13:16:44 equinoxe last message repeated 3 times Sep 18 13:16:44 equinoxe kernel: hub.c: connect-debounce failed, port 2 disabled Sep 18 13:16:44 equinoxe kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s Sep 18 13:16:44 equinoxe kernel: hub.c: port 2, portstatus 100, change 2, 12 Mb/s Sep 18 13:16:44 equinoxe kernel: hub.c: port 2 enable change, status 100 ------------------------------------------------------- This SF.NET email is sponsored by: AMD - Your access to the experts on Hammer Technology! Open Source & Linux Developers, register now for the AMD Developer Symposium. Code: EX8664 http://www.developwithamd.com/developerlab _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
