at my other computer nothing was freezing. i have some new informations:
#> dmesg
usb.c: USB new device connect on bus1/1, assigned device number 3
scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product -
4b8:11e
usb.c: USB device 3 (vend/prod 0x7ab/0xfc03) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scanner.c: probe_scanner: User specified USB scanner -- Vendor:Product -
4b8:11e
scsi1 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 1861
usb-uhci.c: ENXIO 80000300, flags 0, urb deb62740, burb deb620c0
usb.c: USB disconnect on device 3
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
hub.c: USB device not accepting new address (error=-110)
usb-storage: host_reset() requested but not implemented
scsi: device set offline - command error recover failed: host 1 channel 0 id 0
lun 0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
no device in /proc/scsi/scsi
#> cat /proc/scsi/usb-storage-0/1
Host scsi1: usb-storage
Vendor: FREECOM
Product: USB-2 Drive
Serial Number: 10E511100FW150054B19A6
Protocol: Transparent SCSI
Transport: Bulk
GUID: 07abfc03100f0150054b19a6
Attached: Yes
is there anything i can do to get this running?
-Stefan Mueller
-------------------------------------------------------
This SF.net email is sponsored by: Get the new Palm Tungsten T
handheld. Power & Color in a compact size!
http://ads.sourceforge.net/cgi-bin/redirect.pl?palm0002en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
