Hi. I am using linux version 2.4.18. I have two USB-bluetooth adapters.
When I connect the adapters, it throws up following messege, bluetooth.c: found interrupt in bluetooth.c: found bulk in bluetooth.c: found bulk out bluetooth.c: USB Bluetooth converter detected bluetooth.c: Bluetooth converter now attached to ttyUB0 (or usb/ttub/0 for devfs) bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: found bulk in bluetooth.c: found bulk out bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. I have bluez utilities installed in my system. I insmod the modules, rfcomm, sco, hci_usb, bluez, l2cap and bluetooth. But, hciconfig hci0 up fails with the message - Can't get device info: Invalid argument Here is the output of /proc/bus/usb/devices, T: Bus=01 Lev=02 Prnt=24 Port=00 Cnt=01 Dev#= 53 Spd=12 MxCh= 0 D: Ver= 1.01 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=2033 Rev= 0.a0 C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=bluetooth E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 1ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl= 1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 16 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 16 Ivl= 1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl= 1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl= 1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl= 1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl= 1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl= 1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl= 1ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl= 1ms Kindly tell me what other steps I should follow to setup bluetooth. Regards, saugata ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
