I'm trying to get a sagem fast 800 e2 working on my redhat linux system. I've properly installed usb (usbcore and uhci) and the apiusbadsl driver from (not the cd, which driver was, incidently, seriously broke and incapable of being compiled) the eagle driver website (eagle-1.0.2-cc4 driver).
Anyway, once I plug in the USB device, my cat of /proc/bus/usb/devices is as follows (note, there is no ADSL device listed). Am I missing something? T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI Root Hub S: SerialNumber=ece0 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=1110 ProdID=9022 Rev=50.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 0 Alt= 1 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=10ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=08(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms I: If#= 0 Alt= 2 #EPs=13 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=10ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=88(I) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=08(O) Atr=01(Isoc) MxPS= 256 Ivl=1ms E: Ad=89(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=09(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=8a(I) Atr=01(Isoc) MxPS= 16 Ivl=1ms E: Ad=0a(O) Atr=01(Isoc) MxPS= 16 Ivl=1ms ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com. _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
