On Fri, Jun 20, 2003 at 02:16:06PM -0400, Larry Irwin wrote: > Hi All, > I've been using MultiTech 2834ZDX's on /dev/ttyS1 with mgetty for a few > years now on kernel versions 2.2.10 through 2.4.18 (Caldera, Debian, and > RedHat). They work great... > Now that it's hard to get 2 com ports on servers these days, I'm trying to > get a USB modem to work. > I've set up a USB modem (MultiTech 5634ZBA) on /dev/ttyACM0, made the > entries in /etc/uucp/port and /etc/mgetty/mgetty.config and /etc/inittab. I > can dial out fine with uucp, cu, and kermit. But, when I dial into the > system I can't get ioctl's "opost" to work properly. - It always stays on > one line (cr without nl) no matter what I do with stty...
Any idea which ioctl is not working for the acm driver? thanks, greg k-h ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
