Hallo Stephen,
thanks for replying. Sorry about the logs, thought they where attached.
BTW, I also use VMware with Win2K as guest operating system on my RedHat 7.2
box. After a fresh reboot, when plugging the mp3 player in, VMware crashes.
After a reboot of the VMware Win2K, I can plug and unplug the device and get
a VMware error message box, which says "The specified device appears to be
claimed by another driver (usb-storage) on the host operating system which
means that the device may be in use. VMware workstation cannot safely take
control of the device until the host driver is unloaded."
I suppose that's a different kind of problem to be solved, but here I would
be happy if the USB device would work with linux alone. The basic idea of
using it together with Win2K in VMware, was that maybe it's a problem with a
not known filesystem type on the USB storage device.
But now back to the original problem, using the USB mp3 player solely with
linux (RedHat 7.2) ...
dmesg output
<snip>
...
hdc: empty DMA table?
hdc: empty DMA table?
hdc: empty DMA table?
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x1011/0x1) is not claimed by any active
driver.
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
usb-uhci.c: ENXIO 80000280, flags 0, urb d2adae60, burb d2ada87c
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
/dev/vmmon: Vmx86_ReleaseVM: unlocked pages: 4399303, unlocked dirty pages:
2551674
bridge-eth0: clear IFF_PROMISC
/dev/vmnet: open called by PID 32755 (vmware)
bridge-eth0: set IFF_PROMISC
eth0: Setting promiscuous mode.
/dev/vmnet: port on hub 0 successfully opened
/dev/vmnet: open called by PID 32755 (vmware)
/dev/vmnet: port on hub 1 successfully opened
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
scsi singledevice 0 0 0 1
scsi singledevice 0 0 0 1
usb.c: USB disconnect on device 2
hub.c: Cannot enable port 1 of hub 1, disabling port.
hub.c: Maybe the USB cable is bad?
hub.c: USB new device connect on bus1/1, assigned device number 3
usb-uhci.c: ENXIO 80000380, flags 0, urb d6b8f620, burb d6b8fe20
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000380, flags 0, urb d6b8f620, burb d6b8fe20
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000380, flags 0, urb d6b8f620, burb d6b8fe20
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 80000380, flags 0, urb d6b8f820, burb d6b8fe20
usbdevfs: USBDEVFS_CONTROL failed dev 3 rqt 128 rq 6 len 4 ret -6
scsi1 : SCSI emulation for USB Mass Storage devices
Vendor: AccFast Model: USB-MSC Disk IN Rev: T
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
end_request: I/O error, dev 02:00 (floppy), sector 0
floppy0: disk absent or changed during operation
end_request: I/O error, dev 02:00 (floppy), sector 0
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: sda1
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI device (ioctl) reports ILLEGAL REQUEST.
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
I/O error: dev 08:00, sector 2
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
SCSI device sda: 255490 512-byte hdwr sectors (131 MB)
sda: Write Protect is off
sda: I/O error: dev 08:00, sector 0
unable to read partition table
SCSI error: host 1 id 0 lun 0 return code = 8000002
Sense class 7, sense error 0, extended sense 0
Device busy for revalidation (usage=1)
I/O error: dev 08:00, sector 0
FAT: unable to read boot sector
usb.c: USB disconnect on device 3
<snap>
/proc/scsi/scsi output
<snip>
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: SONY Model: DVD-ROM DDU1211 Rev: IYH1
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W2410A Rev: 1.04
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: AccFast Model: USB-MSC Disk IN Rev: T
Type: Direct-Access ANSI SCSI revision: 02
<snap>
/proc/bus/usb/devices output
<snip>
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=f800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1011 ProdID=0001 Rev= 2.05
S: Manufacturer=AccFast
S: Product=AFMP3 Player
S: SerialNumber=4710765066451
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
<snap>
> -----Original Message-----
> From: Stephen J. Gowdy [mailto:[EMAIL PROTECTED]
> Sent: Mittwoch, 6. August 2003 06:02
> To: Finkenzeller Michael
> Cc: [EMAIL PROTECTED]
> Subject: Re: [Linux-usb-users] question for USB MP3 AccFast
>
>
> What is in the logs?
>
> On Tue, 5 Aug 2003, Finkenzeller Michael wrote:
>
> > Hi linux-usb-users,
> >
> > I've bought an mp3 player (Pocki, Clicker) which is also
> extensible with
> > SD/MMC cards, so it's no pure USB memory stick.
> > When I plug it into my RedHat 7.2 (a bit old I know) box,
> the device seems
> > to be recognized (see attached file) as AFMP3, vendor
> AccFast. There is also
> > a /proc/scsi/usb-storage-0/1 entry. But when I try to mount
> e.g. /dev/sda1,
> > I get an error to specify the filesystem.
> > I suppose the filesystem is the problem. Maybe it's not
> supported by linux.
> > Strange thing is, when plugging the thing into a Win2K box,
> it's working at
> > once, w/o installing any drivers at all.
> >
> > Any suggestions?
> >
> > Thanks so far
> > Michael
> >
> >
>
> --
> /------------------------------------+-------------------------\
> |Stephen J. Gowdy | SLAC, MailStop 34, |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
> |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
> |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
> \------------------------------------+-------------------------/
>
-------------------------------------------------------
This SF.Net email sponsored by: Free pre-built ASP.NET sites including
Data Reports, E-commerce, Portals, and Forums are available now.
Download today and enter to win an XBOX or Visual Studio .NET.
http://aspnet.click-url.com/go/psa00100003ave/direct;at.aspnet_072303_01/01
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
