I tried that - no joy! Rik.
> -----Original Message----- > From: Matthew Dharm [mailto:[EMAIL PROTECTED] > Sent: 10 September 2003 20:05 > To: Dunphy Richard-rdunph01 > Cc: [EMAIL PROTECTED] > Subject: Re: [Linux-usb-users] Problem with USB Pendrive and SuSE 8.1 > > > Try mounting /dev/sdb (no partition number). > > Matt > > On Tue, Sep 09, 2003 at 02:04:03PM +0100, Dunphy > Richard-rdunph01 wrote: > > All, > > > > Have recently bought a Typhoon 128Mb USB 2.0 Pen Drive. > > > > As usual all works ok on windows, but I can't mount the > drive in linux. The drive is detected and the relevant > entries in /etc/fstab made, but no joy.. > > > > I wonder if it's something to do with the fact that it > appears as 2 drive. The first drive is small (2Mb) with a > small program to enable/disable security, and the second > drive is the main part. > > > > The only curiosity I noticed was that cdrecord showed only > 1 drive for cdrecord -scanbus. > > > > I've included a text file with outputs from the following > in case it would help... > > 1. sg_scan > > 2. sg_map > > 3. /var/log/messages > > 4. cdrecord -scanbus > > 5. /etc/fstab > > 6. lsusb > > 7. lsusb -v > > 8. lsmod > > 9. /proc/bus/usb/drivers > > 10. /proc/bus/usb/devices > > 11. /proc/scsi/usb-storage-0 > > 12. /proc/scsi/scsi > > > > + outputs from mount commands. > > > > Any help would be greatly apprecitated in getting this > drive to work. > > > > TIA > > RikD. > > > > > > sg_scan > > /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] type=0 > > /dev/sg1: scsi0 channel=0 id=0 lun=1 [em] type=0 > > > > > sg_map > > /dev/sg0 /dev/sda > > /dev/sg1 /dev/sdb > > > > /var/log/messages: > > Sep 8 19:35:11 zeus kernel: hub.c: USB new device connect > on bus2/2, assigned device number 5 > > Sep 8 19:35:11 zeus kernel: usb.c: USB device 5 (vend/prod > 0x1005/0xb113) is not claimed by any active driver. > > Sep 8 19:35:12 zeus kernel: Initializing USB Mass Storage driver... > > Sep 8 19:35:12 zeus kernel: usb.c: registered new driver > usb-storage > > Sep 8 19:35:12 zeus kernel: scsi: limiting sg entries to 204 > > Sep 8 19:35:12 zeus kernel: scsi0 : SCSI emulation for USB > Mass Storage devices > > Sep 8 19:35:12 zeus kernel: Vendor: USB Model: > Flash Drive Rev: 1.06 > > Sep 8 19:35:12 zeus kernel: Type: Direct-Access > ANSI SCSI revision: 02 > > Sep 8 19:35:12 zeus kernel: Vendor: USB Model: > Flash Drive Rev: 1.06 > > Sep 8 19:35:12 zeus kernel: Type: Direct-Access > ANSI SCSI revision: 02 > > Sep 8 19:35:12 zeus kernel: sd: allocated major 8 > > Sep 8 19:35:12 zeus kernel: sd: find_free_slot ...<7>sd: > ... found 08:00 > > Sep 8 19:35:12 zeus kernel: Attached scsi removable disk > sda at scsi0, channel 0, id 0, lun 0 > > Sep 8 19:35:12 zeus kernel: sd: find_free_slot ...<7>sd: > ... found 08:10 > > Sep 8 19:35:12 zeus kernel: Attached scsi removable disk > sdb at scsi0, channel 0, id 0, lun 1 > > Sep 8 19:35:13 zeus kernel: SCSI device sda: 4093 512-byte > hdwr sectors (2 MB) > > Sep 8 19:35:13 zeus kernel: sda: Write Protect is off > > Sep 8 19:35:13 zeus kernel: sda: sda1 sda2 sda3 sda4 > > Sep 8 19:35:13 zeus kernel: SCSI device sdb: 249856 > 512-byte hdwr sectors (128 MB) > > Sep 8 19:35:13 zeus kernel: sdb: Write Protect is off > > Sep 8 19:35:13 zeus kernel: sdb: sdb1 sdb2 sdb4 > > Sep 8 19:35:13 zeus kernel: WARNING: USB Mass Storage data > integrity not assured > > Sep 8 19:35:13 zeus kernel: USB Mass Storage device found at 5 > > Sep 8 19:35:13 zeus kernel: USB Mass Storage support registered. > > Sep 8 19:35:13 zeus insmod: Using > /lib/modules/2.4.19-4GB/kernel/drivers/usb/storage/usb-storage.o > > Sep 8 19:35:13 zeus insmod: Symbol version prefix '' > > Sep 8 19:35:13 zeus kernel: sg_attach: dev0=(21:0) > > Sep 8 19:35:13 zeus kernel: sg_attach: dev1=(21:1) > > Sep 8 19:35:15 zeus /etc/hotplug/usb.agent[1366]: Can't > ignore signal CHLD, forcing to default. > > > > > cdrecord -scanbus > > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 > J�rg Schilling > > Linux sg driver version: 3.2.0 > > Using libscg version 'schily-0.7' > > scsibus0: > > 0,0,0 0) 'USB ' 'Flash Drive ' '1.06' > Removable Disk > > 0,1,0 1) * > > 0,2,0 2) * > > 0,3,0 3) * > > 0,4,0 4) * > > 0,5,0 5) * > > 0,6,0 6) * > > 0,7,0 7) * > > > > /etc/fstab: > > /dev/sda1 /media/sda1 auto noauto,user,exec 0 0 #HOTPLUG > B3Fu.SQqt4EZ1jDF > > /dev/sdb1 /media/sdb1 auto noauto,user,exec 0 0 #HOTPLUG > X2FE.XPGrUkZb8RB > > > > > lsusb > > Bus 002 Device 001: ID 0000:0000 > > Bus 002 Device 002: ID 1063:1555 Motorola Electronics > Taiwan Ltd. [hex] MC141555 Hub > > Bus 002 Device 003: ID 046d:c501 Logitech Inc. Cordless > Mouse Receiver > > Bus 002 Device 004: ID 0000:4a48 > > Bus 002 Device 005: ID 1005:b113 > > Bus 001 Device 001: ID 0000:0000 > > > > > lsusb -v > > > > > > Bus 002 Device 001: ID 0000:0000 > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x0000 > > idProduct 0x0000 > > bcdDevice 0.00 > > iManufacturer 0 > > iProduct 2 USB UHCI Root Hub > > iSerial 1 d000 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x40 > > Self Powered > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type none > > wMaxPacketSize 8 > > bInterval 255 > > Language IDs: (length=4) > > 0000 (null)((null)) > > > > Bus 002 Device 002: ID 1063:1555 Motorola Electronics > Taiwan Ltd. [hex] MC141555 Hub > > Language IDs: none (cannot get min. string descriptor; > got len=-1, error=110:Connection timed out) > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x1063 Motorola Electronics Taiwan Ltd. [hex] > > idProduct 0x1555 MC141555 Hub > > bcdDevice 1.00 > > iManufacturer 0 > > iProduct 0 > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x60 > > Self Powered > > Remote Wakeup > > MaxPower 2mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type none > > wMaxPacketSize 1 > > bInterval 255 > > Language IDs: none (cannot get min. string descriptor; > got len=-1, error=110:Connection timed out) > > > > Bus 002 Device 003: ID 046d:c501 Logitech Inc. Cordless > Mouse Receiver > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.10 > > bDeviceClass 0 Interface > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x046d Logitech Inc. > > idProduct 0xc501 Cordless Mouse Receiver > > bcdDevice 9.00 > > iManufacturer 1 Logitech > > iProduct 2 USB Receiver > > iSerial 0 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 34 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0xa0 > > Remote Wakeup > > MaxPower 50mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 3 Human Interface Devices > > bInterfaceSubClass 1 Boot Interface Subclass > > bInterfaceProtocol 2 Mouse > > iInterface 0 > > HID Device Descriptor: > > bLength 9 > > bDescriptorType 33 > > bcdHID 1.10 > > bCountryCode 0 > > bNumDescriptors 1 > > bDescriptorType 34 Report > > wDescriptorLength 82 > > cannot get report descriptor > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type none > > wMaxPacketSize 8 > > bInterval 10 > > Language IDs: (length=4) > > 0409 English(US) > > > > Bus 002 Device 004: ID 0000:4a48 > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 0 Interface > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x0000 > > idProduct 0x4a48 > > bcdDevice 1.00 > > iManufacturer 1 LG Electronics Inc. > > iProduct 2 USB Monitor > > iSerial 3 R31499 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 34 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x60 > > Self Powered > > Remote Wakeup > > MaxPower 2mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 3 Human Interface Devices > > bInterfaceSubClass 0 No Subclass > > bInterfaceProtocol 0 None > > iInterface 0 > > HID Device Descriptor: > > bLength 9 > > bDescriptorType 33 > > bcdHID 1.00 > > bCountryCode 22 > > bNumDescriptors 1 > > bDescriptorType 34 Report > > wDescriptorLength 180 > > cannot get report descriptor > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type none > > wMaxPacketSize 8 > > bInterval 255 > > Language IDs: (length=4) > > 0409 English(US) > > > > Bus 002 Device 005: ID 1005:b113 > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 2.00 > > bDeviceClass 0 Interface > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 64 > > idVendor 0x1005 > > idProduct 0xb113 > > bcdDevice 1.00 > > iManufacturer 0 > > iProduct 1 USB Flash Drive > > iSerial 2 077712340180060 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 32 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x80 > > MaxPower 100mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 2 > > bInterfaceClass 8 Mass Storage > > bInterfaceSubClass 6 SCSI > > bInterfaceProtocol 80 Bulk (Zip) > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type none > > wMaxPacketSize 64 > > bInterval 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x02 EP 2 OUT > > bmAttributes 2 > > Transfer Type Bulk > > Synch Type none > > wMaxPacketSize 64 > > bInterval 0 > > Language IDs: (length=4) > > 0409 English(US) > > > > Bus 001 Device 001: ID 0000:0000 > > Device Descriptor: > > bLength 18 > > bDescriptorType 1 > > bcdUSB 1.00 > > bDeviceClass 9 Hub > > bDeviceSubClass 0 > > bDeviceProtocol 0 > > bMaxPacketSize0 8 > > idVendor 0x0000 > > idProduct 0x0000 > > bcdDevice 0.00 > > iManufacturer 0 > > iProduct 2 USB UHCI Root Hub > > iSerial 1 d400 > > bNumConfigurations 1 > > Configuration Descriptor: > > bLength 9 > > bDescriptorType 2 > > wTotalLength 25 > > bNumInterfaces 1 > > bConfigurationValue 1 > > iConfiguration 0 > > bmAttributes 0x40 > > Self Powered > > MaxPower 0mA > > Interface Descriptor: > > bLength 9 > > bDescriptorType 4 > > bInterfaceNumber 0 > > bAlternateSetting 0 > > bNumEndpoints 1 > > bInterfaceClass 9 Hub > > bInterfaceSubClass 0 > > bInterfaceProtocol 0 > > iInterface 0 > > Endpoint Descriptor: > > bLength 7 > > bDescriptorType 5 > > bEndpointAddress 0x81 EP 1 IN > > bmAttributes 3 > > Transfer Type Interrupt > > Synch Type none > > wMaxPacketSize 8 > > bInterval 255 > > Language IDs: (length=4) > > 0000 (null)((null)) > > > > > lsmod > > > > Module Size Used by Tainted: P > > osst 45352 0 (autoclean) (unused) > > st 28460 0 (autoclean) (unused) > > sg 29056 0 (autoclean) > > usb-storage 57296 0 > > af_packet 13800 1 (autoclean) > > videodev 6112 0 (autoclean) > > sr_mod 14616 0 (autoclean) (unused) > > isa-pnp 31520 0 (unused) > > sblive 60224 1 > > uart401 7584 1 [sblive] > > pnp 49652 1 [sblive] > > ac97 16416 1 [sblive] > > soundbase 567712 1 [sblive uart401 pnp ac97] > > sndshield 11628 0 [sblive uart401 pnp ac97 > soundbase] > > ipv6 224220 -1 (autoclean) > > hid 19332 0 (unused) > > mousedev 4340 1 > > joydev 5920 0 (unused) > > evdev 4640 0 (unused) > > input 3296 0 [hid mousedev joydev evdev] > > usb-uhci 23084 0 (unused) > > usbcore 61760 1 [usb-storage hid usb-uhci] > > 8139too 15208 1 > > mii 1232 0 [8139too] > > nls_iso8859-1 2844 1 (autoclean) > > nls_cp437 4348 1 (autoclean) > > vfat 10612 1 (autoclean) > > fat 32376 0 (autoclean) [vfat] > > lvm-mod 65408 0 (autoclean) > > ide-cd 30340 0 (autoclean) > > cdrom 28736 0 (autoclean) [sr_mod ide-cd] > > reiserfs 210644 2 > > > > /proc/bus/usb/drivers: > > > > usbdevfs > > hub > > 96-111: hiddev > > hid > > usb-storage > > > > /proc/bus/usb/devices: > > > > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > B: Alloc=129/900 us (14%), #Int= 2, #Iso= 0 > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 5 > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=1063 ProdID=1555 Rev= 1.00 > > C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 2mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms > > T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=1.5 MxCh= 0 > > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=046d ProdID=c501 Rev= 9.00 > > S: Manufacturer=Logitech > > S: Product=USB Receiver > > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms > > T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=02 Dev#= 4 Spd=1.5 MxCh= 0 > > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=0000 ProdID=4a48 Rev= 1.00 > > S: Manufacturer=LG Electronics Inc. > > S: Product=USB Monitor > > S: SerialNumber=R31499 > > C:* #Ifs= 1 Cfg#= 1 Atr=60 MxPwr= 2mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 5 Spd=12 MxCh= 0 > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > > P: Vendor=1005 ProdID=b113 Rev= 1.00 > > S: Product=USB Flash Drive > > S: SerialNumber=077712340180060 > > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 > Driver=usb-storage > > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > > > /proc/scsi/usb-storage-0: > > > > Host scsi0: usb-storage > > Vendor: Unknown > > Product: USB Flash Drive > > Serial Number: 077712340180060 > > Protocol: Transparent SCSI > > Transport: Bulk > > GUID: 1005b1130077712340180060 > > Attached: Yes > > > > /proc/scsi/sg/version: > > 30200 Version: 3.2.0 (20020804) > > > > > ls /proc/bus/usb > > 001 002 devices drivers > > > > > ls /proc/scsi > > scsi sg usb-storage-0 > > > > > > > mount /dev/sdb1 > > /dev/sdb1: Input/output error > > mount: I could not determine the filesystem type, and none > was specified > > > > > > > mount -t vfat /dev/sdb1 /media/sdb1 > > mount: wrong fs type, bad option, bad superblock on /dev/sdb1, > > or too many mounted file systems > > > > > -- > Matthew Dharm Home: > [EMAIL PROTECTED] > Maintainer, Linux USB Mass Storage Driver > > Hey, has anyone seen the Microsoft sales guy? It's his feeding time... > -- Mike > User Friendly, 4/17/1998 > ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
