Hi List My new laptop came without a serial port, so I had to replace the serial Towitoko card reader with its USB equivalent: a Towitoko (SMC) Chipdrive (SCR335) for the usb port. I am using it for a HBCI card for electr. banking with gnucash (with libchipcard). With a 2.6.0-test6 kernel I loaded the pl2303 driver but then I am stuck. syslog says after pluggin the gadget in: Oct 2 20:07:23 [kernel] usb 3-2: USB disconnect, address 5 Oct 2 20:07:25 [kernel] hub 3-0:1.0: new USB device on port 2, assigned address 6 Oct 2 20:07:26 [usb.agent] ... no modules for USB product 4e6/5115/416 root(eno,eg)# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 006: ID 04e6:5115 SCM Microsystems, Inc. Bus 003 Device 002: ID 046d:c00e Logitech, Inc. Optical Mouse Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 root(eno,eg)# looks fine to me. but the reader is not attached. any suggestions?
greetings -- Eildert Groeneveld =================================================== Institute for Animal Breeding Mariensee 31535 Neustadt Germany Tel : (+49)(0)5034 871155 Fax : (+49)(0)5034 871239 e-mail: [EMAIL PROTECTED] http://www.tzv.fal.de/~eg/ =================================================== ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
