OK.. I've played with my set-up. Now the card reader gets assigned to
/dev/sda as per sg_map. When I try to mount I get:
mount: /dev/sda1 is not a valid block device
Hmm... debug info:
>From the kernel:
Oct 4 12:54:41 red kernel: sda: Unit Not Ready, sense:
Oct 4 12:54:41 red kernel: sda: I/O error: dev 08:00, sector 0
>From the debug log I see that it says that the media is not present. (It is
installed in the reader.) I've got verbose debugging on and there is a lot
of info in there. I don't want to post it here. Let me know if someone wants
to take a look at it and I'll email it directly.
Thanks!
Jay
On Fri, Oct 03, 2003 at 09:13:53PM -0700, Stephen J. Gowdy wrote:
> Are you sure sd_mod is loaded? Have you tried mounting /dev/sda1 (or
> whatever partition)? What is in your log files?
>
> On Fri, 3 Oct 2003, George Doster wrote:
>
> >
> > I've got a FlashLink ALLinOne USB Reader from SimpleTech.
> > I've gotten the device to sort-of attach to my linux box. I'm running
> > linux 2.4.22. I use the usb port to sync my palm, so i know the usb stuff
> > works.
> >
> > Output of cat /proc/scsi/scsi:
> >
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> > Vendor: MITSUMI Model: CR-4804TE Rev: 2.4C
> > Type: CD-ROM ANSI SCSI revision: 02
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00
> > Vendor: SPRING Model: MultiCard Slot A Rev: 0100
> > Type: Direct-Access ANSI SCSI revision: 02
> >
> > I have a cdburner... that's scsi0.
> >
> > I also have a directory /proc/scsi/usb-storage-0/ where the file 1 exists.
> >
> > Output of cat /proc/scsi/usb-storage-0/1:
> >
> > Host scsi1: usb-storage
> > Vendor: ----- Ltd.
> > Product: SPRING-Rev1.1
> > Serial Number: 982029841734
> > Protocol: Transparent SCSI
> > Transport: Bulk
> > GUID: 07cc02000000982029841734
> > Attached: Yes
> >
> > Lookin good to me... Now I'm ready to insert a card and mount. For grins I run
> > sg_scan.
> >
> > Output of sg_scan:
> >
> > /dev/sg0: scsi0 channel=0 id=0 lun=0 [em] type=5
> > /dev/sg1: scsi1 channel=0 id=0 lun=0 [em] type=0
> >
> > Hmm... Ok I guess...
> >
> > How about sg_map:
> >
> > /dev/sg0 /dev/scd0
> > /dev/sg1
> >
> > Uh oh... this isn't good. For whatever reason it does not link /dev/sda0 to
> > /dev/sg1. Why? I have compiled in the block device (disk) support for scsi.
> > Any help on this would be great.... I'm tired of using windows to read and
> > write to my SD card!!
> >
> > Jay
> >
> >
> > -------------------------------------------------------
> > This sf.net email is sponsored by:ThinkGeek
> > Welcome to geek heaven.
> > http://thinkgeek.com/sf
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> >
>
> --
> /------------------------------------+-------------------------\
> |Stephen J. Gowdy | SLAC, MailStop 34, |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
> |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
> |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
> \------------------------------------+-------------------------/
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by:ThinkGeek
> Welcome to geek heaven.
> http://thinkgeek.com/sf
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
