Hi, I am back .. it seems i am able to access that usbfs now but I still can't get my webcam (quickcam zoom) to work.
here is the output of /var/log/messages Nov 3 12:43:11 dragonz kernel: pwc Philips PCA645/646 + PCVC675/680/690 + PCVC730/740/750 webcam module version 8.10 loaded. Nov 3 12:43:11 dragonz kernel: pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, Nov 3 12:43:11 dragonz kernel: pwc the Creative WebCam 5, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. Nov 3 12:43:11 dragonz kernel: usb.c: registered new driver Philips webcam Nov 3 12:43:24 dragonz kernel: usb-uhci.c: $Revision: 1.275 $ time 10:14:14 Nov 3 2003 Nov 3 12:43:24 dragonz kernel: usb-uhci.c: High bandwidth mode enabled Nov 3 12:43:24 dragonz kernel: usb-uhci.c: USB UHCI at I/O 0x5040, IRQ 15 Nov 3 12:43:24 dragonz kernel: usb.c: new USB bus registered, assigned bus number 1 Nov 3 12:43:24 dragonz kernel: hub.c: USB hub found Nov 3 12:43:24 dragonz kernel: hub.c: 2 ports detected Nov 3 12:43:24 dragonz kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver Nov 3 12:43:24 dragonz kernel: hub.c: new USB device 00:01.2-1, assigned address 2 Nov 3 12:43:27 dragonz /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Nov 3 12:43:27 dragonz /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0 Nov 3 12:43:29 dragonz /etc/hotplug/usb.agent: ... no modules for USB product 46d/8b4/3 Nov 3 12:43:45 dragonz last message repeated 2 times that usbproduct is the cam's ... any ideas anyone??? See ya and thx Thierry ------------------------------------------------------- This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
