[Linux-usb-users] Nokia 6650 , USB wire, linux 2.4.22

Sun, 09 Nov 2003 07:51:23 -0800 

Just got cable to connect.
Nokia family is recognized (0x0421) but terminal is probably not (0x0401).

From Cls=02 I would expect acm driver.

Any hint? Is there a way to "force" acm: maybe it works?

Best regards,

Iztok

/proc/bus/usb/devices:

E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0421 ProdID=0401 Rev= 3.06
S:  Manufacturer=Nokia Mobile Phones
S:  Product=Nokia 6650
C:* #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=  8mA
I:  If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=08 Prot=01 Driver=(none)
I:  If#= 1 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=05 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I:  If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I:  If#= 6 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I:  If#= 6 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 7 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=0b Prot=00 Driver=(none)
I:  If#= 8 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I:  If#= 8 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
E:  Ad=85(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 9 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=fe Prot=00 Driver=(none)
I:  If#=10 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)
I:  If#=10 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=(none)

dmesg:

usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Nokia Mobile Phones
Product: Nokia 6650
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x421/0x401) is not claimed by any active driver.
  Length              = 18
  DescriptorType      = 01
  USB version         = 1.10
  Vendor:Product      = 0421:0401
  MaxPacketSize0      = 64
  NumConfigurations   = 1
  Device version      = 3.06
  Device Class:SubClass:Protocol = 02:00:00
    Communications class
Configuration:
  bLength             =    9
  bDescriptorType     =   02
  wTotalLength        = 015c
  bNumInterfaces      =   0b
  bConfigurationValue =   01
  iConfiguration      =   00
  bmAttributes        =   e0
  MaxPower            =    8mA

  Interface: 0
  Alternate Setting:  0
    bLength             =    9
    bDescriptorType     =   04
    bInterfaceNumber    =   00
    bAlternateSetting   =   00
    bNumEndpoints       =   00
    bInterface Class:SubClass:Protocol =   02:08:01
    iInterface          =   00

etc...

hub.c: port 2, portstatus 100, change 0, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: port 2, portstatus 100, change 0, 12 Mb/s
usb.c: registered new driver acm
acm.c: v0.21:USB Abstract Control Model driver for USB modems and ISDN adapters
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9900, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9700, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9900, burb f71b9a00
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 348 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9700, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9900, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9700, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9a00, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9900, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9a00, burb f71b9900
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9700, burb f71b9900
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9900, burb f71b9a00
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 348 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9700, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f71b9a00, burb f71b9800
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -6
host/usb-uhci.c: ENXIO 80000280, flags 0, urb f7241780, burb f71b9900
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -6
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 00:1d.1-1 address 2
usb.c: kusbd: /sbin/hotplug remove 2




-------------------------------------------------------
This SF.Net email sponsored by: ApacheCon 2003,
16-19 November in Las Vegas. Learn firsthand the latest
developments in Apache, PHP, Perl, XML, Java, MySQL,
WebDAV, and more! http://www.apachecon.com/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to