Hi,
I'm relatively new to the list and have been using Linux for over a year.
After much reading and tweaking, I am still unable to get my USB drive
to work with Gentoo. I have the correct modules loaded, and the
system recognizes the device, but does not assign the usb-storage
module driver to it. Therefore I can't find the device in the /dev
directory to mount, which is supposed to be a scsi device.
Motherboard is an Abatross KX600 with 4 USB 2.0 ports. Currently, while
the 2.6 kernel is on my system, it's a bit broken, so I'm using 2.4.22.
Any help is appreciated.
Drive: Butterfly Media 128 MG USB drive (recognized in Linux as ACDC).
I know the SCSI emulation is working because I am able to mount CD's
on both the CDRW and DVD drives as SCSI drives.
In the /dev directory I don't see any devices that begin with sc
In /dev/scsi I don't see anything.
In cat /proc/scsi/scsi I see
"Attached devices: none"
Pertinent output of dmesg:
hub.c: new USB device 00:10.2-2, assigned address 4
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:10.2-2.2, assigned address 5
usb.c: USB device 5 (vend/prod 0xd7e/0x2316) is not claimed by any
active driver.
Output of /proc/bus/usb/drivers
usbdevfs
hub
usb-storage
usbdnet
usbnet
In /proc/bus/pci/devices I see 3 entries which contain usb-uhci. (This
and not the usb-ohci, usb-uhci is correct for my mobo).
Output of /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.21-pfeifer-r1_pre4 ehci-hcd
S: Product=VIA Technologies, Inc. USB 2.0
S: SerialNumber=00:10.3
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 60/900 us ( 7%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=dc00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 2
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0d7e ProdID=2315 Rev= 0.01
S: Manufacturer=ACDC Inc.
S: Product=USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=15ms
T: Bus=03 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0d7e ProdID=2316 Rev= 0.01
S: Manufacturer=ACDC Inc.
S: Product=Security Device
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
--
Tracey
Linux Counter #264789
Imagination is more important than knowledge. It is the preview of life's
coming attractions. - Albert Einstein
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive? Does it
help you create better code? SHARE THE LOVE, and help us help
YOU! Click Here: http://sourceforge.net/donate/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
