Hello,
I seem to have a slight timout problem with my Coolermaster EAK-USI
keyboard under 2.6.3 (and other kernels as well). I somehow managed to get
it to work under pre 2.6.2 kernels by not loading any USB modules (strange
but true) but I'm not happy with a 'sloppy' solutions like that...
I will appreciate your suggestion/help.
Please see the attached info.
TIA.
--
"Not me, guy. I read the Bash man page each day like a Jehovah's
Witness reads the Bible. No wait, the Bash man page IS the
bible. Excuse me..." (comp.os.linux.misc)
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400 AGP] Host Bridge (rev 80)
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal
decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e0000000-e1ffffff
Prefetchable memory behind bridge: d8000000-dfffffff
Capabilities: [80] Power Management version 2
00:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
Subsystem: Avermedia Technologies Inc: Unknown device 0003
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e2000000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
00:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
Subsystem: Avermedia Technologies Inc: Unknown device 0003
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at e2001000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at e2002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06) (prog-if 8a
[Master SecP PriP])
Subsystem: Giga-byte Technology GA-7VAX Mainboard
Flags: bus master, medium devsel, latency 32
I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio
Controller (rev 50)
Subsystem: Giga-byte Technology GA-7VAX Onboard Audio (Realtek ALC650)
Flags: medium devsel, IRQ 11
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
(rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at e400 [size=256]
Memory at e2003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV25 [GeForce4 Ti 4200] (rev a3)
(prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 10
Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Memory at dc000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 2.0
Bus 004 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 003 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 002 Device 003: ID 0a81:0101 Chesen Electronics Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0a81 Chesen Electronics Corp.
idProduct 0x0101
bcdDevice 1.10
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 bytes 8 once
bInterval 10
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 bytes 8 once
bInterval 10
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 102
Bus 002 Device 002: ID 09da:001a A4 Tech Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x09da A4 Tech Co., Ltd
idProduct 0x001a
bcdDevice 0.01
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0005 bytes 5 three times
bInterval 10
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 48
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.3 uhci_hcd
iProduct 2 UHCI Host Controller
iSerial 1 0000:00:10.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 255
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1
bMaxPacketSize0 8
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.3 ehci_hcd
iProduct 2 EHCI Host Controller
iSerial 1 0000:00:10.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0002 bytes 2 twice
bInterval 12
Module Size Used by
snd_via82xx 25280 0
snd_pcm 99236 1 snd_via82xx
snd_timer 25860 1 snd_pcm
snd_ac97_codec 62724 1 snd_via82xx
snd_page_alloc 12036 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7872 1 snd_via82xx
snd_rawmidi 24544 1 snd_mpu401_uart
snd 53412 6
snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi
hid 32704 0
ipt_LOG 5568 2
ipt_state 1856 4
ip_conntrack 32368 1 ipt_state
ipt_limit 2368 5
iptable_filter 2752 1
ip_tables 17792 4 ipt_LOG,ipt_state,ipt_limit,iptable_filter
uhci_hcd 33484 0
ehci_hcd 37828 0
usbcore 114332 5 hid,uhci_hcd,ehci_hcd
evdev 9280 0
agpgart 32104 0
nvidia 2070824 0
lirc_gpio 9136 1
tuner 17868 0
tvaudio 22220 0
tda9875 7876 0
bttv 150124 1 lirc_gpio
video_buf 21188 1 bttv
i2c_algo_bit 9736 1 bttv
v4l2_common 6208 1 bttv
btcx_risc 4808 1 bttv
i2c_core 23364 5 tuner,tvaudio,tda9875,bttv,i2c_algo_bit
videodev 9728 1 bttv
soundcore 9888 2 snd,bttv
apm 18280 0
8139too 24512 0
xe0800000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c000:ea70
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Machine check exception polling timer started.
ikconfig 0.7 with /proc/config*
VFS: Disk quotas dquot_6.5.1
Console: switching to colour frame buffer device 128x48
pty: 256 Unix98 ptys configured
lirc_dev: IR Remote Control driver registered, at major 61
Real Time Clock Driver v1.12
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: WDC WD800JB-00CRA1, ATA DISK drive
hdb: WDC WD2000JB-00EVA0, ATA DISK drive
hdc: ASUS DVD-ROM E616, ATAPI CD/DVD-ROM drive
hdd: CD-W540E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 >
hdb: max request size: 1024KiB
hdb: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hdb: hdb1
hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X CD-ROM CD-R/RW CD-MRW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
Console: switching to colour frame buffer device 128x48
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 10
i2o: Checking for PCI I2O controllers...
I2O configuration manager v 0.04.
(C) Copyright 1999 Red Hat Software
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
Adding 586364k swap on /dev/hda2. Priority:-1 extents:1
EXT3 FS on hda3, internal journal
8139too Fast Ethernet driver 0.9.27
eth0: RealTek RTL8139 at 0xe1864000, 00:20:ed:84:e6:31, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
Linux video capture interface: v1.00
bttv: driver version 0.9.12 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 11, latency: 32, mmio: 0xe2000000
bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 1461:0003
bttv0: using: AVerMedia TVPhone 98 [card=41,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fefff3 [init]
bttv0: Avermedia eeprom[0x0a99]: tuner=5 radio:yes remote control:yes
bttv0: using tuner=5
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... found
tda9875: no such chip at 0xb0 (dic=0x11 rev=0x2)
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
tvaudio: found tda9874a.
tvaudio: found tda9874h/a @ 0xb0
tuner: chip found @ 0xc2
tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
bttv0: add subdevice "remote0"
lirc_gpio (-1): card type 0x29, id 0x31461
lirc_dev: lirc_register_plugin:sample_rate: 10
lirc_gpio (0): driver registered
nvidia: no version for "struct_module" found: kernel tainted.
nvidia: module license 'NVIDIA' taints kernel.
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14
18:29:26 PST 2004
Linux agpgart interface v0.100 (c) Dave Jones
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 64
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: reset hcs_params 0x3206 dbg=0 cc=3 pcc=2 ordered !ppc ports=6
ehci_hcd 0000:00:10.3: reset hcc_params 6872 thresh 7 uframes 256/512/1024
ehci_hcd 0000:00:10.3: capability 0001 at 68
ehci_hcd 0000:00:10.3: irq 5, pci mem e18a3000
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
ehci_hcd 0000:00:10.3: init command 010009 (park)=0 ithresh=1 period=256 RUN
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
ehci_hcd 0000:00:10.3: root hub device address 1
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.3 ehci_hcd
usb usb1: SerialNumber: 0000:00:10.3
drivers/usb/core/usb.c: usb_hotplug
usb usb1: registering 1-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
spurious 8259A interrupt: IRQ7.
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: Single TT
hub 1-0:1.0: TT requires at most 8 FS bit times
hub 1-0:1.0: Port indicators are not supported
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: hub controller current requirement: 0mA
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: enabling power on all ports
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: irq 10, io base 0000d000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:10.0: root hub device address 1
usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.3 uhci_hcd
usb usb2: SerialNumber: 0000:00:10.0
drivers/usb/core/usb.c: usb_hotplug
usb usb2: registering 2-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: ganged power switching
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: Port indicators are not supported
hub 2-0:1.0: power on to power good time: 2ms
hub 2-0:1.0: hub controller current requirement: 0mA
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: enabling power on all ports
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: irq 11, io base 0000d400
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 1, status 501, change 1, 480 Mb/s
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:10.1: root hub device address 1
usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.3 uhci_hcd
usb usb3: SerialNumber: 0000:00:10.1
drivers/usb/core/usb.c: usb_hotplug
usb usb3: registering 3-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 3-0:1.0: usb_probe_interface
hub 3-0:1.0: usb_probe_interface - got id
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 3-0:1.0: standalone hub
hub 3-0:1.0: ganged power switching
hub 3-0:1.0: global over-current protection
hub 3-0:1.0: Port indicators are not supported
hub 3-0:1.0: power on to power good time: 2ms
hub 3-0:1.0: hub controller current requirement: 0mA
hub 3-0:1.0: local power source is good
hub 3-0:1.0: no over-current condition exists
hub 3-0:1.0: enabling power on all ports
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: irq 11, io base 0000d800
hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:10.3: port 1 low speed --> companion
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
drivers/usb/host/uhci-hcd.c: detected 2 ports
uhci_hcd 0000:00:10.2: root hub device address 1
usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1
drivers/usb/core/message.c: USB device number 1 default language ID 0x409
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.3 uhci_hcd
usb usb4: SerialNumber: 0000:00:10.2
drivers/usb/core/usb.c: usb_hotplug
usb usb4: registering 4-0:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
ehci_hcd 0000:00:10.3: GetStatus port 1 status 003402 POWER OWNER sig=k CSC
ehci_hcd 0000:00:10.3: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
hub 1-0:1.0: port 2, status 501, change 1, 480 Mb/s
hub 4-0:1.0: usb_probe_interface
hub 4-0:1.0: usb_probe_interface - got id
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 4-0:1.0: standalone hub
hub 4-0:1.0: ganged power switching
hub 4-0:1.0: global over-current protection
hub 4-0:1.0: Port indicators are not supported
hub 4-0:1.0: power on to power good time: 2ms
hub 4-0:1.0: hub controller current requirement: 0mA
hub 4-0:1.0: local power source is good
hub 4-0:1.0: no over-current condition exists
hub 4-0:1.0: enabling power on all ports
hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x501
ehci_hcd 0000:00:10.3: port 2 low speed --> companion
ehci_hcd 0000:00:10.3: GetStatus port 2 status 003402 POWER OWNER sig=k CSC
hub 3-0:1.0: port 1, status 100, change 3, 12 Mb/s
hub 3-0:1.0: port 2, status 300, change 3, 1.5 Mb/s
hub 2-0:1.0: port 1, status 301, change 3, 1.5 Mb/s
hub 2-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
usb 2-1: new low speed USB device using address 2
usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 2 default language ID 0x409
usb 2-1: Product: RF USB Mouse
usb 2-1: Manufacturer: A4Tech
drivers/usb/core/usb.c: usb_hotplug
usb 2-1: registering 2-1:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
hub 2-0:1.0: port 2, status 301, change 3, 1.5 Mb/s
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
hub 2-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x301
usb 2-2: new low speed USB device using address 3
usb 2-2: new device strings: Mfr=1, Product=2, SerialNumber=0
drivers/usb/core/message.c: USB device number 3 default language ID 0x409
usb 2-2: Product: USB Keyboard
usb 2-2: Manufacturer: CHESEN
drivers/usb/core/usb.c: usb_hotplug
usb 2-2: registering 2-2:1.0 (config #1, interface 0)
drivers/usb/core/usb.c: usb_hotplug
usb 2-2: registering 2-2:1.1 (config #1, interface 1)
drivers/usb/core/usb.c: usb_hotplug
hub 3-0:1.0: port 1 enable change, status 100
hub 3-0:1.0: port 2 enable change, status 300
hub 4-0:1.0: port 1, status 100, change 3, 12 Mb/s
hub 4-0:1.0: port 2, status 100, change 3, 12 Mb/s
hub 4-0:1.0: port 1 enable change, status 100
hub 4-0:1.0: port 2 enable change, status 100
drivers/usb/host/uhci-hcd.c: d400: suspend_hc
drivers/usb/host/uhci-hcd.c: d800: suspend_hc
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
drivers/usb/core/usb.c: registered new driver hiddev
hid 2-1:1.0: usb_probe_interface
hid 2-1:1.0: usb_probe_interface - got id
input: USB HID v1.10 Mouse [A4Tech RF USB Mouse] on usb-0000:00:10.0-1
hid 2-2:1.0: usb_probe_interface
hid 2-2:1.0: usb_probe_interface - got id
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.0-2
hid 2-2:1.1: usb_probe_interface
hid 2-2:1.1: usb_probe_interface - got id
drivers/usb/host/uhci-hcd.c: uhci_result_control() failed with status 500000
[df0532a0] link (1f0531b2) element (1f07a1c0)
Element != First TD
0: [df07a180] link (1f07a1c0) e3 LS Length=7 MaxLen=7 DT0 EndPt=0 Dev=3,
PID=2d(SETUP) (buf=1ef2e160)
1: [df07a1c0] link (1f07a200) e3 LS Stalled Babble Length=1 MaxLen=1 DT1 EndPt=0
Dev=3, PID=69(IN) (buf=1ef2e180)
2: [df07a200] link (00000001) e3 LS IOC Active Length=0 MaxLen=7ff DT1 EndPt=0
Dev=3, PID=e1(OUT) (buf=00000000)
drivers/usb/input/hid-core.c: ctrl urb status -75 received
PCI: Setting latency timer of device 0000:00:11.5 to 64
drivers/usb/input/hid-core.c: ctrl urb status -104 received
drivers/usb/input/hid-core.c: timeout initializing reports
usb 2-2: control timeout on ep0out
usb 2-2: control timeout on ep0out
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:10.0-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
input: AT Translated Set 2 keyboard on isa0060/serio0
usb 2-2: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 3 rqt 128 rq 6 len 256 ret -110
usb 2-2: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 3 rqt 128 rq 6 len 256 ret -110
usb 2-2: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 3 rqt 128 rq 6 len 65 ret -110
usb 2-2: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 3 rqt 128 rq 6 len 102 ret -110
usb 2-1: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 256 ret -110
usb 2-1: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 256 ret -110
usb 2-1: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 256 ret -110
usb 2-1: control timeout on ep0in
usbfs: USBDEVFS_CONTROL failed cmd lsusb dev 2 rqt 128 rq 6 len 48 ret -110
CPU0
0: 154570 XT-PIC timer
1: 730 XT-PIC i8042
2: 0 XT-PIC cascade
5: 0 XT-PIC ehci_hcd
8: 1 XT-PIC rtc
10: 97 XT-PIC uhci_hcd
11: 2359 XT-PIC bttv0, uhci_hcd, uhci_hcd, eth0, VIA8233
14: 4908 XT-PIC ide0
15: 35 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 1
MIS: 0
