I have Mitsumi USB mini-mouse (gray colored with Fujitsu-Siemens logo) for a laptop.
When I plug it into my laptop, it's recognized ok but an error message "ctrl usb
status -75 received" is printed and the mouse cannot be used. Only once it
inaccidentally worked under X, but only until a next reboot. The same error (-75)
occurs when plugged into another Linux 2.6.3 machine. Mouse should not be physically
broken, though, since it worked ok under pre-installed Win98 when I bought this laptop.
Some info about my system:
lupus:~# cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 87/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.3 uhci_hcd
S: Product=UHCI Host Controller
S: SerialNumber=0000:00:01.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03ee ProdID=6407 Rev= 1.10
S: Manufacturer=Mitsumi
S: Product=HID-compliant Mouse (USB)
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 3 Ivl=16ms
********************
dmesg:
drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
PCI: Found IRQ 9 for device 0000:00:01.2
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: irq 9, io base 0000f4e0
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
usb 1-2: new low speed USB device using address 2
drivers/usb/input/hid-core.c: ctrl urb status -75 received
input: USB HID v1.00 Mouse [Mitsumi HID-compliant Mouse (USB)] on usb-0000:00:01.2-2
drivers/usb/core/usb.c: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
********************
XF86Config:
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
#Option "Emulate3Buttons"
Option "ZAxisMapping" "4 5"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "USB Mouse"
InputDevice "Fujitsu Touch Panel" "CorePointer"
EndSection
********************
lupus:~# uname -a
Linux lupus 2.6.3 #4 Thu Mar 11 20:59:08 EET 2004 i586 GNU/Linux
********************
The machine is Fujitsu Lifebook B112 laptop.
--
Jaakko Holster
/* Student of Information Engineering, University of Oulu
Paalikatu 14 B 201, FIN-90520 Oulu
holster at iki fi +358 41 436 0880 */
-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
