Thank you Matt,

it is also solution for my problem
with Omniflash Uno 4 in 1 reader.

G. Gumenyuk

--- Matthew Dharm <[EMAIL PROTECTED]>
wrote:
> Try compiling with CONFIG_SCSI_MULTI_LUN enabled.
> 
> Matt
> 
> On Sun, Mar 28, 2004 at 12:53:51AM -0500, Dan
> Merillat wrote:
> > It's GE Branded, from Integraded Circuit Solution.
>  A quick google
> > search of the ID dosn't show it up anywhere, so
> it's probably fairly
> > uncommon.  It registers as a SCSI Mass Storage
> device, and /dev/sda
> > shows up, but there's no media.  It also registers
> a /dev/sg device, so
> > I'm wondering if there's some command to chose
> which media to read that
> > I'm missing.
> > 
> > Here's the relevant information:
> > 
> > Linux vulpine 2.6.0 #5 Sun Jan 4 16:44:07 EST 2004
> i686 GNU/Linux
> > 
> > (If this is supported in 2.6.3 sorry for wasting
> your time.  I screwed
> > up my toolchain trying to cross-compile and havn't
> fixed it to upgrade
> > the kernel on my workstation yet)
> > 
> > Bus 001 Device 002: ID 0dda:0102 Integrated
> Circuit Solution, Inc. 
> >   Language IDs: none (invalid length string
> descriptor bf; len=0)
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               2.00
> >   bDeviceClass            0 (Defined at Interface
> level)
> >   bDeviceSubClass         0 
> >   bDeviceProtocol         0 
> >   bMaxPacketSize0         8
> >   idVendor           0x0dda Integrated Circuit
> Solution, Inc.
> >   idProduct          0x0102 
> >   bcdDevice           52.7d
> >   iManufacturer           1 
> >   iProduct                2 
> >   iSerial                 3 
> >   bNumConfigurations      1
> >   Configuration Descriptor:
> >     bLength                 9
> >     bDescriptorType         2
> >     wTotalLength           39
> >     bNumInterfaces          1
> >     bConfigurationValue     1
> >     iConfiguration          4
> >     bmAttributes         0x80
> >     MaxPower              500mA
> >     Interface Descriptor:
> >       bLength                 9
> >       bDescriptorType         4
> >       bInterfaceNumber        0
> >       bAlternateSetting       0
> >       bNumEndpoints           3
> >       bInterfaceClass         8 Mass Storage
> >       bInterfaceSubClass      6 SCSI
> >       bInterfaceProtocol     80 Bulk (Zip)
> >       iInterface              5 
> >       Endpoint Descriptor:
> >         bLength                 7
> >         bDescriptorType         5
> >         bEndpointAddress     0x81  EP 1 IN
> >         bmAttributes            2
> >           Transfer Type            Bulk
> >           Synch Type               none
> >         wMaxPacketSize         64
> >         bInterval               0
> >       Endpoint Descriptor:
> >         bLength                 7
> >         bDescriptorType         5
> >         bEndpointAddress     0x02  EP 2 OUT
> >         bmAttributes            2
> >           Transfer Type            Bulk
> >           Synch Type               none
> >         wMaxPacketSize         64
> >         bInterval               0
> >       Endpoint Descriptor:
> >         bLength                 7
> >         bDescriptorType         5
> >         bEndpointAddress     0x83  EP 3 IN
> >         bmAttributes            3
> >           Transfer Type            Interrupt
> >           Synch Type               none
> >         wMaxPacketSize          8
> >         bInterval              10
> >   Language IDs: none (invalid length string
> descriptor bf; len=0)
> > 
> > 
> > dmesg:
> > hub 1-0:1.0: new USB device on port 1, assigned
> address 2
> > Initializing USB Mass Storage driver...
> > scsi0 : SCSI emulation for USB Mass Storage
> devices
> >   Vendor: ICSI      Model: SD Card           Rev:
> 2.7C
> >   Type:   Direct-Access                      ANSI
> SCSI revision: 02
> > Attached scsi removable disk sda at scsi0, channel
> 0, id 0, lun 0
> > Attached scsi generic sg0 at scsi0, channel 0, id
> 0, lun 0,  type 0
> > WARNING: USB Mass Storage data integrity not
> assured
> > USB Mass Storage device found at 2
> > drivers/usb/core/usb.c: registered new driver
> usb-storage
> > USB Mass Storage support registered.
> > 
> > 
> > 
> > 
> >
>
-------------------------------------------------------
> > This SF.Net email is sponsored by: IBM Linux
> Tutorials
> > Free Linux tutorial presented by Daniel Robbins,
> President and CEO of
> > GenToo technologies. Learn everything from
> fundamentals to system
> >
>
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> >
>
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> 
> -- 
> Matthew Dharm                              Home:
> [EMAIL PROTECTED] 
> Maintainer, Linux USB Mass Storage Driver
> 
> We've made a business out of making money from
> annoying and stupid people.
> I think you fall under that category.
>                                       -- Chief
> User Friendly, 7/11/1998
> 

> ATTACHMENT part 2 application/pgp-signature 



__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to