Hi all I've problems installing the ov511 driver for my new Philips ToUcam II (PCVC820K, should have an ov518 bridge and an OV6630 sensor). I use Gentoo Linux with Kernel 2.4.26 (also tried 2.4.22). With the ov511-1.65 and ov511-2.27 drivers I get following errors:
1.65: kernel: usb.c: registered new driver ov511 kernel: ov511.c: USB OV518 video device found kernel: ov511.c: Device revision 1 kernel: ov511.c: Compression required with OV518...enabling kernel: ov511.c: Can't determine sensor slave IDs kernel: ov511.c: OV518 Config failed kernel: ov511.c: Camera initialization failed ...there was no device for the camara created. 2.27 kernel: hub.c: new USB device 02:00.2-1.3, assigned address 10 kernel: ov511_core.c: USB OV518 video device found kernel: ov511_core.c: Device revision 1 kernel: ov511_core.c: Compression required with OV518...enabling kernel: i2c-core.o: adapter OV51x registered as adapter 0. kernel: ov511_core.c: Device at usb-02:00.2-1.3 registered to minor 0 After starting i.e xawtv following message appears by accessing to /dev/video0: kernel: ov511_core.c: No sensor is detected yet Any ideas what the problem could be? Thank you in advance! Michael ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
