Hi list, another device, another trouble ;-) Hope you can help here too. I tried to attach my Minolta Dimage A2 to my box (running 2.6.8-rc2 kernel) and got the problem, that the device will not connect correctly - I'm pretty sure, that I need to tweak something, but what?
The camera supports two modes: - acting as usb-storage device (here I get into trouble) - supporting PTP (this seems to work) Attached are three files. The most interesting is the "message-storage.txt" where I enabled USB debugging while attaching the cam. So where is the problem? Do you need some more information? TIA Gerhard
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.8-rc2 uhci_hcd S: Product=Intel Corp. 82371AB/EB/MB PIIX4 USB S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=132b ProdID=0001 Rev= 0.01 S: Manufacturer=KONICA MINOLTA S: Product=DIMAGE CAMERA C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=100ms
Jul 19 13:40:39 gja-laeppi kernel: uhci_hcd 0000:00:07.2: wakeup_hc Jul 19 13:40:39 gja-laeppi kernel: uhci_hcd 0000:00:07.2: port 1 portsc 0083 Jul 19 13:40:39 gja-laeppi kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s Jul 19 13:40:39 gja-laeppi kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: new full speed USB device using address 4 Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: default language 0x0409 Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: Product: DIMAGE CAMERA Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: Manufacturer: KONICA MINOLTA Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: hotplug Jul 19 13:40:39 gja-laeppi kernel: usb 1-1: adding 1-1:1.0 (config #1, interface 0)
Jul 19 13:39:06 gja-laeppi kernel: uhci_hcd 0000:00:07.2: wakeup_hc Jul 19 13:39:06 gja-laeppi kernel: uhci_hcd 0000:00:07.2: port 1 portsc 0083 Jul 19 13:39:06 gja-laeppi kernel: hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s Jul 19 13:39:06 gja-laeppi kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 Jul 19 13:39:07 gja-laeppi kernel: usb 1-1: new full speed USB device using address 2 Jul 19 13:39:12 gja-laeppi kernel: usb 1-1: control timeout on ep0in Jul 19 13:39:12 gja-laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 19 13:39:12 gja-laeppi kernel: [c74c9240] link (074c91e2) element (074c8040) Jul 19 13:39:12 gja-laeppi kernel: 0: [c74c8040] link (074c8080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fafa640) Jul 19 13:39:12 gja-laeppi kernel: 1: [c74c8080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 19 13:39:12 gja-laeppi kernel: Jul 19 13:39:12 gja-laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 19 13:39:12 gja-laeppi kernel: [c74c9240] link (074c91e2) element (074c8040) Jul 19 13:39:12 gja-laeppi kernel: 0: [c74c8040] link (074c8080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fafa640) Jul 19 13:39:12 gja-laeppi kernel: 1: [c74c8080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 19 13:39:12 gja-laeppi kernel: Jul 19 13:39:12 gja-laeppi kernel: usb 1-1: device not accepting address 2, error -71 Jul 19 13:39:12 gja-laeppi kernel: usb 1-1: new full speed USB device using address 3 Jul 19 13:39:17 gja-laeppi kernel: usb 1-1: control timeout on ep0in Jul 19 13:39:17 gja-laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 19 13:39:17 gja-laeppi kernel: [c74c9240] link (074c91e2) element (074c8040) Jul 19 13:39:17 gja-laeppi kernel: 0: [c74c8040] link (074c8080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fafa640) Jul 19 13:39:17 gja-laeppi kernel: 1: [c74c8080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 19 13:39:17 gja-laeppi kernel: Jul 19 13:39:17 gja-laeppi kernel: uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 Jul 19 13:39:17 gja-laeppi kernel: [c74c9240] link (074c91e2) element (074c8040) Jul 19 13:39:17 gja-laeppi kernel: 0: [c74c8040] link (074c8080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0fafa640) Jul 19 13:39:17 gja-laeppi kernel: 1: [c74c8080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000) Jul 19 13:39:17 gja-laeppi kernel: Jul 19 13:39:18 gja-laeppi kernel: usb 1-1: device not accepting address 3, error -71 Jul 19 13:39:25 gja-laeppi kernel: uhci_hcd 0000:00:07.2: port 1 portsc 0082 Jul 19 13:39:25 gja-laeppi kernel: hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s Jul 19 13:39:25 gja-laeppi kernel: hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 Jul 19 13:39:26 gja-laeppi kernel: uhci_hcd 0000:00:07.2: suspend_hc
