On Sat, 2004-09-04 at 05:20, Joshua N Pritikin wrote: > I have a ScanJet 3400C. I am running Linux 2.6.7 i386. This is the > first time I am trying to use my scanner since I upgraded to 2.6. > > There seems to be a problem with USB. When I insert the USB > connector, the syslog reports: > > Sep 4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: remote wakeup > Sep 4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] > = 0x00010101 CSC PPS CCS > Sep 4 10:21:07 emit kernel: hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s > Sep 4 10:21:07 emit kernel: hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 > status 0x101 > Sep 4 10:21:07 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] > = 0x00100103 PRSC PPS PES CCS > Sep 4 10:21:07 emit kernel: usb 1-2: new full speed USB device using address 5 > Sep 4 10:21:07 emit kernel: usb 1-2: new device strings: Mfr=10, Product=11, > SerialNumber=12 > Sep 4 10:21:07 emit kernel: usb 1-2: default language 0x0409 > Sep 4 10:21:12 emit kernel: usb 1-2: control timeout on ep0in > Sep 4 10:21:22 emit last message repeated 2 times > Sep 4 10:21:27 emit kernel: usb 1-2: control timeout on ep0out > Sep 4 10:21:27 emit kernel: usb 1-2: can't set config #1, error -110 > Sep 4 10:21:27 emit kernel: ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [2] > = 0x00100103 PRSC PPS PES CCS > Sep 4 10:21:27 emit kernel: usb 1-2: new full speed USB device using address 6 > Sep 4 10:21:27 emit kernel: usb 1-2: new device strings: Mfr=10, Product=11, > SerialNumber=12 > Sep 4 10:21:27 emit kernel: usb 1-2: default language 0x0409 > Sep 4 10:21:33 emit kernel: usb 1-2: control timeout on ep0in > Sep 4 10:21:43 emit last message repeated 2 times > Sep 4 10:21:48 emit kernel: usb 1-2: control timeout on ep0out > Sep 4 10:21:48 emit kernel: usb 1-2: can't set config #1, error -110 > > The scanner never appears in /proc/bus/usb/devices. However, the > scanner is fine because when I plug into Knoppix 3.3 (kernel 2.4.22) > then it DOES appear in /proc/bus/usb/devices. My USB printer also > works on the same USB port. > > Is this a scanner bug? Where should I report the problem?
See www.sane-project.org read the README.linux file Check your libusb and hotplug setup. Also for version sane-backends 1.0.14 the hp3400c is supported by the NIASH backend (sane-external backends) Recently the NIASH backend is moved from sane external backends to sane-backends, see CVS See also http://www.sane-project.org/cgi-bin/driver.pl?manu=hew&model=3400&bus=usb For NIASH backend (if kernel version 2.6) kernel version 2.6.8 or higher is needed -- ---------- m.vr.gr. Gerard Klaver ------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=5047&alloc_id=10808&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
