Hi,
I have a PSX - USB converter box that used to work under kernel 2.4,
and I recently upgraded to 2.6, and it doesn't work anymore.
Dmesg says:
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 4-1: new low speed USB device using address 2
usb 4-1: configuration #1 chosen from 2 choices
usb 4-1: string descriptor 0 read error: -32
usb 4-1: string descriptor 0 read error: -32
usb 4-1: string descriptor 0 read error: -32
drivers/usb/input/hid-core.c: ctrl urb status -32 received
drivers/usb/input/hid-core.c: ctrl urb status -32 received
input: USB HID v1.00 Joystick [0925:8866] on usb-0000:00:1d.3-1
I'm loading usbcore, usbhid, uhci-hcd, joydev
lspci -v gives:
0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #1 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at ef00 [size=32]
0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #2 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at ef20 [size=32]
0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #3 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at ef40 [size=32]
0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB
UHCI #4 (rev 02) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at ef80 [size=32]
0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2
EHCI Controller (rev 02) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. P4P800 Mainboard
Flags: bus master, medium devsel, latency 0, IRQ 193
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] #0a [20a0]
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
/proc/bus/usb/devices gives:
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8.mythtv2 uhci_hcd
S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
S: SerialNumber=0000:00:1d.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 2
P: Vendor=0925 ProdID=8866 Rev= 2.88
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl=10ms
C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=
E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl=10ms
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c03d Rev=20.00
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8.mythtv2 uhci_hcd
S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
S: SerialNumber=0000:00:1d.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8.mythtv2 uhci_hcd
S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
S: SerialNumber=0000:00:1d.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.8.mythtv2 uhci_hcd
S: Product=Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
S: SerialNumber=0000:00:1d.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
Can someone help?
thanks,
andrew
-------------------------------------------------------
This SF.net email is sponsored by: IT Product Guide on ITManagersJournal
Use IT products in your business? Tell us what you think of them. Give us
Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more
http://productguide.itmanagersjournal.com/guidepromo.tmpl
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
