Stephen J. Gowdy wrote:
Turn off "ub" in the SCSI confiugraiton for your kernel.
should be in the Block Drivers config section:
config BLK_DEV_UB
tristate "Low Performance USB Block driver"
On Sat, 22 Jan 2005, Pierre Ossman wrote:
When connecting a Rio Forge MP3 player which has both internal memory
and a flash card I only get at block device for the internal memory (the
first). From some googling I found that previously you were required to
enable "Probe all LUNs" in the SCSI layer. In the current kernel
(2.6.10) it doesn't seem to solve the problem though.
dmesg:
usb 1-5: new high speed USB device using ehci_hcd and address 2
ub: sizeof ub_scsi_cmd 64 ub_dev 2568
uba: device 2 capacity nsec 506368 bsize 512
uba: device 2 capacity nsec 506368 bsize 512
uba: uba1
/proc/bus/usb/devices:
T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=045a ProdID=5042 Rev= 0.00
S: Manufacturer=Rio Audio Inc.
S: Product=Rio Forge
S: SerialNumber=0002F5CA17364596
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=ub
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Any ideas on what I'm doing wrong? =)
Rgds
Pierre
--
~Randy
-------------------------------------------------------
This SF.Net email is sponsored by: IntelliVIEW -- Interactive Reporting
Tool for open source databases. Create drag-&-drop reports. Save time
by over 75%! Publish reports on the web. Export to DOC, XLS, RTF, etc.
Download a FREE copy at http://www.intelliview.com/go/osdn_nl
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
