Here it goes the output now that I recompiled the kernel with the
patch applied and enabling the debug for mass storage... It's
attached...
Let me know if there's something else that can be done...
Thx,
On 7/1/05, Javier-Elias Vasquez-Vivas <[EMAIL PROTECTED]> wrote:
> Well, it took me a while again to perform the trial. Bad luck, it
> didn't work, I experienced the same thing as before, with not getting
> scd0 working but sda doing it but not recognizing iso9660...
>
> I can't provide logs right now since I was confident it would work and
> wanted not to compile twice (now I have to any ways). So I'll provide
> them later. This was just to let you know it didn't... :-( ....
>
> Thx,
>
> Javier.
>
> On 6/29/05, Daniel Drake <[EMAIL PROTECTED]> wrote:
> > Javier-Elias Vasquez-Vivas wrote:
> > > I'm attaching dmesg output redirected to the provided file... It's
> > > still weird how 1st a message shows up saying:
> > >
> > > usbat_flash_transport: INQUIRY. Returning bogus response.
> >
> > Don't worry about that. You captured the important part below.
> >
> > > usb-storage: usbat_identify_device: Cylinder low is 00
> > > usb-storage: usbat_identify_device: Detected Flash reader/writer
> >
> > When I was extending the driver, one problem I faced was how to distinguish
> > between the CompactFlash readers and the HP cdroms. I tried, but couldn't
> > find
> > anyone with one of the HP devices to confirm the behaviour, so I assumed it
> > would follow the ATAPI specs in terms of providing a device signature on
> > reset. Your report shows that this is not the case though.
> >
> > Please try the attached patch. It should be a more solid check for which
> > device type we are dealing with.
> >
> > Thanks,
> > Daniel
> >
> >
> >
>
>
> --
> Javier-Elias Vasquez-Vivas
>
--
Javier-Elias Vasquez-Vivas
int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 5 Wake, Enabled 0 Runtime GPEs in this block
evgpeblk-0979 [06] ev_create_gpe_block : GPE 10 to 1F [_GPE] 2 regs on int 0x9
evgpeblk-0987 [06] ev_create_gpe_block : Found 1 Wake, Enabled 0 Runtime GPEs in this block
Completing Region/Field/Buffer/Package initialization:..........................................................................
Initialized 18/19 Regions 7/7 Fields 38/38 Buffers 11/11 Packages (454 nodes)
Executing all Device _STA and_INI methods:.............................................
45 Devices found containing: 45 _STA, 2 _INI methods
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:01:0b.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver 2.1.22 [Flags: R/W].
Initializing Cryptographic API
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
atyfb: using auxiliary register aperture
atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
atyfb: Mach64 BIOS is located at c0000, mapped at c00c0000.
atyfb: BIOS frequency table:
atyfb: PCLK_min_freq 984, PCLK_max_freq 23500, ref_freq 1432, ref_divider 31
atyfb: MCLK_pwd 4200, MCLK_max_freq 7500, XCLK_max_freq 10000, SCLK_freq 5000
atyfb: 8M SGRAM (1:1), 14.31818 MHz XTAL, 235 MHz PLL, 75 Mhz MCLK, 100 MHz XCLK
Console: switching to colour frame buffer device 80x30
atyfb: fb0: ATY Mach64 frame buffer device on PCI
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SBTN]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Real Time Clock Driver v1.12
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
lp0: using parport0 (interrupt-driven).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
nbd: registered device at major 43
NET3 PLIP version 2.4-parport [EMAIL PROTECTED]
plip0: Parallel port at 0x378, using IRQ 7.
via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
eth0: VIA Rhine III at 0x1d000, 00:08:54:02:3b:3f, IRQ 10.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
PPP generic driver version 2.4.2
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller at PCI slot 0000:00:1f.1
ICH2: chipset revision 2
ICH2: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: ST340810A, ATA DISK drive
hdb: ATAPI-CD ROM-DRIVE-56MAX, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 78165360 sectors (40020 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 < hda5 hda6 hda7 hda8 hda9 >
hdb: ATAPI 56X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbmon: debugs is not available
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: Intel Corporation 82801BA/BAM USB (Hub #1)
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ef40
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:00:1f.4 to 64
uhci_hcd 0000:00:1f.4: Intel Corporation 82801BA/BAM USB (Hub #2)
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ef80
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
mice: PS/2 mouse device common for all mice
input: PC Speaker
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
ALSA device list:
#0: C-Media PCI CMI8738-MC6 (model 55) at 0xd400, irq 9
usb 1-2: new full speed USB device using uhci_hcd and address 2
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
input: AT Translated Set 2 keyboard on isa0060/serio0
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 200k freed
kjournald starting. Commit interval 5 seconds
input: PS/2 Generic Mouse on isa0060/serio1
Initializing USB Mass Storage driver...
usb-storage: USB Mass Storage device detected
usb-storage: -- associate_dev
usb-storage: Vendor: 0x03f0, Product: 0x0207, Revision: 0x0001
usb-storage: Interface Subclass: 0x01, Protocol: 0xff
usb-storage: Transport: SCM/ATAPI
usb-storage: Protocol: 8070i
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=40 value=a030 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: INIT 1
Adding 979892k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda9, internal journal
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: INIT 2
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: INIT 3
usb-storage: usb_stor_ctrl_transfer: rq=41 rqtype=40 value=a117 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0017 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_get_status: 0xA1
usb-storage: usbat_identify_device: Detected Flash reader/writer
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=40 value=a0b0 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=40 value=a030 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: INIT 4
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0017 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0016 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0015 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=41 rqtype=40 value=5514 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=41 rqtype=40 value=aa15 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: INIT 8
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: INIT 9
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=40 value=a070 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: INIT 10
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: INIT 11
usb-storage: usb_stor_ctrl_transfer: rq=82 rqtype=c0 value=0000 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usbat_read_user_io: UIO register reads F8
usb-storage: INIT 12
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0017 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0016 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0015 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=41 rqtype=40 value=5514 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=41 rqtype=40 value=aa15 index=00 len=0
usb-storage: Status code 0; transferred 0/0
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: usb_stor_ctrl_transfer: rq=40 rqtype=c0 value=0014 index=00 len=1
usb-storage: Status code 0; transferred 1/1
usb-storage: -- transfer complete
usb-storage: INIT 13
usb-storage: usb_stor_ctrl_transfer: rq=80 rqtype=40 value=0000 index=00 len=8
usb-storage: Status code 0; transferred 8/8
usb-storage: -- transfer complete
usb-storage: INIT 14
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: *** thread sleeping.
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00
usb-storage: usbat_flash_transport: INQUIRY. Returning bogus response.
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
Vendor: HP Model: CD-Writer+ 8200e Rev: 0001
Type: Direct-Access ANSI SCSI revision: 00
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad LUN (0:1)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7:0)
usb-storage: scsi cmd done, result=0x40000
usb-storage: *** thread sleeping.
usb-storage: device scan complete
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
mtrr: no MTRR for f5000000,800000 found
eth0: no IPv6 routers present
