On Tue, 12 Jul 2005, Ryan Underwood wrote: > Hi, > > I got this generic VIA USB2/Firewire combo card (according to the FAQ, > these have some issues). With 2.6.12.1, when I insert the card > everything seems to be setup okay, but inserting a bus-powered device > triggers no event and the device is not powered on. Inserting a hub and > then connecting the device to the hub, the "active" light on the hub > remains in the "inactive" state. Included with the card was a > USB->power plug which I believe is intended to supply power from a hub > to the card, but inserting or removing it makes no difference. > > I have attached the dmesg. The card was inserted at boot, then the > device (a SM reader) inserted, then I manually inserted usb-storage, and > then having no effect, I removed the card generating strange messages but > leaving me with a usable system at least, and then inserted a 16-bit ethernet > card which I'm using to post this. The 'nobody cared' IRQ always > happens when I remove a card, it's a bug in the yenta driver related to > Toshiba as far as I know.
Did you ever make any progress on this? Did anything show up with CONFIG_USB_DEBUG turned on? Alan Stern ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
