Hi, I've got am I-mate SP3, running wince.
It works very well with every linux 2.6 kernel I tried (actually 2.6.13, using the ipaq driver and synce. The phone is accessed trought ttyUSB0. dmesg shows: ipaq 1-1:1.0: PocketPC PDA converter detected usb 1-1: PocketPC PDA converter now attached to ttyUSB0 in /proc/bus/usb/devices I read: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 3 P: Vendor=0bb4 ProdID=0a51 Rev= 0.00 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ipaq E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms C: #Ifs= 1 Cfg#= 2 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms C: #Ifs= 1 Cfg#= 3 Atr=c0 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver= E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms But I have a big problem. I should use as an USB gprs modem. Since it is possible to configure it to be a (HTC) modem, using it's menu, when I enable it to act as a modem on the usb port the content of /proc/bus/usb/devices who refers to the phone changes to: I T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 37 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0bb4 ProdID=00cf Rev= 0.90 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=02(comm.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=80ms The hotplug does not work anymore using the ipaq driver (as I exspected), and the device is not attacched to ttyUSB0. I read Cls=02(comm.). I suppose there should be a way to use something like cdc-acm driver. Unfortunatelly this driver does not seem to like my phone. All I get is a sad: usb 1-1: new full speed USB device using uhci_hcd and address 39 Is there a way to solve this problem and to use I-mate SP3 smartphone as gprs modem for linux or should I surrender? Thanx in advance Luigi Genoni ------------------------------------------------------- SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
