/var/log/messages: last line is when removed and reinserted dongle.
18:32:01 localhost syslogd 1.4.1#17: restart.
18:32:01 localhost kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
18:32:01 localhost kernel: Inspecting /boot/System.map-2.6.12-rc3
18:32:01 localhost kernel: Loaded 33885 symbols from
/boot/System.map-2.6.12-rc3.
18:32:01 localhost kernel: Symbols match kernel version 2.6.12.
18:32:01 localhost kernel: No module symbols loaded - kernel modules not
enabled.
18:32:01 localhost kernel: de with idebus=xx
18:32:01 localhost kernel: NFORCE2: IDE controller at PCI slot 0000:00:09.0
18:32:01 localhost kernel: NFORCE2: chipset revision 162
18:32:01 localhost kernel: NFORCE2: not 100%% native mode: will probe
irqs later
18:32:01 localhost kernel: NFORCE2: BIOS didn't set cable bits
correctly. Enabling workaround.
18:32:01 localhost kernel: NFORCE2: BIOS didn't set cable bits
correctly. Enabling workaround.
18:32:01 localhost kernel: NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
18:32:01 localhost kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS
settings: hda:DMA, hdb:DMA
18:32:01 localhost kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS
settings: hdc:DMA, hdd:DMA
18:32:01 localhost kernel: hda: QUANTUM FIREBALLP KA13.6, ATA DISK drive
18:32:01 localhost kernel: hdb: WDC WD800JB-00JJA0, ATA DISK drive
18:32:01 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
18:32:01 localhost kernel: hdc: CD-RW IDE5232, ATAPI CD/DVD-ROM drive
18:32:01 localhost kernel: hdd: TOSHIBA DVD-ROM SD-M1212, ATAPI
CD/DVD-ROM drive
18:32:01 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
18:32:01 localhost kernel: hda: max request size: 128KiB
18:32:01 localhost kernel: hda: 27067824 sectors (13858 MB) w/371KiB
Cache, CHS=26853/16/63, UDMA(33)
18:32:01 localhost kernel: hda: cache flushes not supported
18:32:01 localhost kernel: hda: hda1 hda2 < hda5 hda6 >
18:32:01 localhost kernel: hdb: max request size: 128KiB
18:32:01 localhost kernel: hdb: 156301488 sectors (80026 MB) w/8192KiB
Cache, CHS=65535/16/63, UDMA(100)
18:32:01 localhost kernel: hdb: cache flushes supported
18:32:01 localhost kernel: hdb: hdb1 hdb2 < hdb5 > hdb3 hdb4
18:32:01 localhost kernel: hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
18:32:01 localhost kernel: Uniform CD-ROM driver Revision: 3.20
18:32:01 localhost kernel: hdd: ATAPI 32X DVD-ROM drive, 256kB Cache,
UDMA(33)
18:32:01 localhost kernel: ide-floppy driver 0.99.newide
18:32:01 localhost kernel: ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
18:32:01 localhost kernel: ACPI: PCI Interrupt 0000:00:02.2[C] -> Link
[APCL] -> GSI 22 (level, high) -> IRQ 177
18:32:01 localhost kernel: ehci_hcd 0000:00:02.2: nVidia Corporation
nForce2 USB Controller
18:32:01 localhost kernel: ehci_hcd 0000:00:02.2: new USB bus
registered, assigned bus number 1
18:32:01 localhost kernel: ehci_hcd 0000:00:02.2: irq 177, io mem 0xea000000
18:32:01 localhost kernel: ehci_hcd 0000:00:02.2: USB 2.0 initialized,
EHCI 1.00, driver 10 Dec 2004
18:32:01 localhost kernel: usb usb1: Product: nVidia Corporation nForce2
USB Controller
18:32:01 localhost kernel: usb usb1: Manufacturer: Linux 2.6.12-rc3 ehci_hcd
18:32:01 localhost kernel: usb usb1: SerialNumber: 0000:00:02.2
18:32:01 localhost kernel: hub 1-0:1.0: USB hub found
18:32:01 localhost kernel: hub 1-0:1.0: 6 ports detected
18:32:01 localhost kernel: ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
18:32:01 localhost kernel: ACPI: PCI Interrupt 0000:00:02.0[A] -> Link
[APCF] -> GSI 21 (level, high) -> IRQ 185
18:32:01 localhost kernel: ohci_hcd 0000:00:02.0: nVidia Corporation
nForce2 USB Controller
18:32:01 localhost kernel: ohci_hcd 0000:00:02.0: new USB bus
registered, assigned bus number 2
18:32:01 localhost kernel: ohci_hcd 0000:00:02.0: irq 185, io mem 0xea004000
18:32:01 localhost kernel: usb usb2: Product: nVidia Corporation nForce2
USB Controller
18:32:01 localhost kernel: usb usb2: Manufacturer: Linux 2.6.12-rc3 ohci_hcd
18:32:01 localhost kernel: usb usb2: SerialNumber: 0000:00:02.0
18:32:01 localhost kernel: hub 2-0:1.0: USB hub found
18:32:01 localhost kernel: hub 2-0:1.0: 3 ports detected
18:32:01 localhost kernel: ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
18:32:01 localhost kernel: ACPI: PCI Interrupt 0000:00:02.1[B] -> Link
[APCG] -> GSI 20 (level, high) -> IRQ 193
18:32:01 localhost kernel: ohci_hcd 0000:00:02.1: nVidia Corporation
nForce2 USB Controller (#2)
18:32:01 localhost kernel: ohci_hcd 0000:00:02.1: new USB bus
registered, assigned bus number 3
18:32:01 localhost kernel: ohci_hcd 0000:00:02.1: irq 193, io mem 0xea005000
18:32:01 localhost kernel: usb usb3: Product: nVidia Corporation nForce2
USB Controller (#2)
18:32:01 localhost kernel: usb usb3: Manufacturer: Linux 2.6.12-rc3 ohci_hcd
18:32:01 localhost kernel: usb usb3: SerialNumber: 0000:00:02.1
18:32:01 localhost kernel: hub 3-0:1.0: USB hub found
18:32:01 localhost kernel: hub 3-0:1.0: 3 ports detected
18:32:01 localhost kernel: usb 1-2: new high speed USB device using
ehci_hcd and address 3
18:32:01 localhost kernel: usb 1-2: Product: Lexar Media Inc. RW022
18:32:01 localhost kernel: usb 1-2: Manufacturer: Lexar Media Inc
18:32:01 localhost kernel: usb 1-2: SerialNumber: 20050518150006671
18:32:01 localhost kernel: usbcore: registered new driver hiddev
18:32:01 localhost kernel: usb 2-1: new low speed USB device using
ohci_hcd and address 2
18:32:01 localhost kernel: usb 2-1: Product: Logitech Extreme 3D
18:32:01 localhost kernel: usb 2-1: Manufacturer: Logitech
18:32:01 localhost kernel: drivers/usb/input/hid-core.c: timeout
initializing reports
18:32:01 localhost kernel:
18:32:01 localhost kernel: input: USB HID v1.10 Joystick [Logitech
Logitech Extreme 3D] on usb-0000:00:02.0-1
18:32:01 localhost kernel: usbcore: registered new driver usbhid
18:32:01 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB HID
core driver
18:32:01 localhost kernel: mice: PS/2 mouse device common for all mice
18:32:01 localhost kernel: i2c /dev entries driver
18:32:01 localhost kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at
0x5000
18:32:01 localhost kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at
0x5500
18:32:01 localhost kernel: input: AT Translated Set 2 keyboard on
isa0060/serio0
18:32:01 localhost kernel: usb 3-1: new full speed USB device using
ohci_hcd and address 2
18:32:01 localhost kernel: Bluetooth: HCI USB driver ver 2.8
18:32:01 localhost kernel: usb 3-1: Product: YAMAHA S08
18:32:01 localhost kernel: usb 3-1: Manufacturer: YAMAHA Corporation
18:32:01 localhost kernel: usbcore: registered new driver hci_usb
18:32:01 localhost kernel: Bluetooth: VHCI driver ver 1.1
18:32:01 localhost kernel: Bluetooth: HCI UART driver ver 2.1
18:32:01 localhost kernel: Bluetooth: HCI H4 protocol initialized
18:32:01 localhost kernel: Bluetooth: HCI BCSP protocol initialized
18:32:01 localhost kernel: Bluetooth: Broadcom Blutonium firmware driver
ver 1.0
18:32:01 localhost kernel: usbcore: registered new driver bcm203x
18:32:01 localhost kernel: Bluetooth: Digianswer Bluetooth USB driver
ver 0.8
18:32:01 localhost kernel: usbcore: registered new driver bpa10x
18:32:01 localhost kernel: Bluetooth: BlueFRITZ! USB driver ver 1.1
18:32:01 localhost kernel: usbcore: registered new driver bfusb
18:32:01 localhost kernel: NET: Registered protocol family 26
18:32:01 localhost kernel: NET: Registered protocol family 2
18:32:01 localhost kernel: input: ImPS/2 Generic Wheel Mouse on
isa0060/serio1
18:32:01 localhost kernel: IP: routing cache hash table of 4096 buckets,
32Kbytes
18:32:01 localhost kernel: TCP established hash table entries: 32768
(order: 6, 262144 bytes)
18:32:01 localhost kernel: TCP bind hash table entries: 32768 (order: 5,
131072 bytes)
18:32:01 localhost kernel: TCP: Hash tables configured (established
32768 bind 32768)
18:32:01 localhost kernel: IPv4 over IPv4 tunneling driver
18:32:01 localhost kernel: Initializing IPsec netlink socket
18:32:01 localhost kernel: NET: Registered protocol family 1
18:32:01 localhost kernel: NET: Registered protocol family 15
18:32:01 localhost kernel: Bluetooth: L2CAP ver 2.7
18:32:01 localhost kernel: Bluetooth: L2CAP socket layer initialized
18:32:01 localhost kernel: Bluetooth: RFCOMM ver 1.5
18:32:01 localhost kernel: Bluetooth: RFCOMM socket layer initialized
18:32:01 localhost kernel: Bluetooth: RFCOMM TTY layer initialized
18:32:01 localhost kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.2
18:32:01 localhost kernel: Bluetooth: BNEP filters: protocol multicast
18:32:01 localhost kernel: Bluetooth: HIDP (Human Interface Emulation)
ver 1.1
18:32:01 localhost kernel: ACPI wakeup devices:
18:32:01 localhost kernel: HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
18:32:01 localhost kernel: ACPI: (supports S0 S1 S3 S4 S4bios S5)
18:32:01 localhost kernel: EXT3-fs: mounted filesystem with ordered data
mode.
18:32:01 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
18:32:01 localhost kernel: Freeing unused kernel memory: 228k freed
18:32:01 localhost kernel: kjournald starting. Commit interval 5 seconds
18:32:01 localhost kernel: Adding 838112k swap on /dev/hda6.
Priority:-1 extents:1
18:32:01 localhost kernel: EXT3 FS on hdb5, internal journal
18:32:01 localhost kernel: kjournald starting. Commit interval 5 seconds
18:32:01 localhost kernel: EXT3 FS on hdb4, internal journal
18:32:01 localhost kernel: EXT3-fs: mounted filesystem with ordered data
mode.
18:32:01 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
18:32:01 localhost kernel: agpgart: Detected NVIDIA nForce2 chipset
18:32:01 localhost kernel: agpgart: AGP aperture is 128M @ 0xd0000000
18:32:01 localhost kernel: nvnet: module license 'NVIDIA' taints kernel.
18:32:01 localhost kernel: ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
18:32:01 localhost kernel: ACPI: PCI Interrupt 0000:00:04.0[A] -> Link
[APCH] -> GSI 22 (level, high) -> IRQ 177
18:32:01 localhost kernel: ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
18:32:01 localhost kernel: ACPI: PCI Interrupt 0000:00:06.0[A] -> Link
[APCJ] -> GSI 21 (level, high) -> IRQ 185
18:32:01 localhost kernel: intel8x0_measure_ac97_clock: measured 49748 usecs
18:32:01 localhost kernel: intel8x0: clocking to 47442
18:32:01 localhost kernel: Initializing USB Mass Storage driver...
18:32:01 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
18:32:01 localhost kernel: usbcore: registered new driver usb-storage
18:32:01 localhost kernel: USB Mass Storage support registered.
18:32:01 localhost kernel: ALSA sound/usb/usbmidi.c:1111: created 2
output and 1 input ports
18:32:01 localhost kernel: usbcore: registered new driver snd-usb-audio
18:32:01 localhost kernel: NET: Registered protocol family 17
18:32:01 localhost kernel: Vendor: Lexar Model: Media Inc. CF
Rev: 019D
18:32:01 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
18:32:01 localhost kernel: Attached scsi removable disk sda at scsi0,
channel 0, id 0, lun 0
18:32:01 localhost kernel: Attached scsi generic sg0 at scsi0, channel
0, id 0, lun 0, type 0
18:32:01 localhost kernel: Vendor: Lexar Model: Media Inc. SD
Rev: 019D
18:32:01 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
18:32:01 localhost kernel: Attached scsi removable disk sdb at scsi0,
channel 0, id 0, lun 1
18:32:01 localhost kernel: Attached scsi generic sg1 at scsi0, channel
0, id 0, lun 1, type 0
18:32:01 localhost kernel: Vendor: Lexar Model: Media Inc. SM/xD
Rev: 019D
18:32:01 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
18:32:01 localhost kernel: Attached scsi removable disk sdc at scsi0,
channel 0, id 0, lun 2
18:32:01 localhost kernel: Attached scsi generic sg2 at scsi0, channel
0, id 0, lun 2, type 0
18:32:01 localhost kernel: Vendor: Lexar Model: Media Inc. MS
Rev: 019D
18:32:01 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
18:32:01 localhost kernel: Attached scsi removable disk sdd at scsi0,
channel 0, id 0, lun 3
18:32:01 localhost kernel: Attached scsi generic sg3 at scsi0, channel
0, id 0, lun 3, type 0
18:32:02 localhost kernel: ACPI: Power Button (FF) [PWRF]
18:32:03 localhost kernel: lp0: using parport0 (interrupt-driven).
18:32:05 localhost kernel: NET: Registered protocol family 10
18:32:05 localhost kernel: IPv6 over IPv4 tunneling driver
18:32:05 localhost xfs: CONFIG: unknown parameter "cache-hi-mark"
18:32:05 localhost xfs: CONFIG: unknown parameter "cache-low-mark"
18:32:05 localhost xfs: CONFIG: unknown parameter "cache-balance"
18:32:07 localhost Xprt_33: No matching visual for __GLcontextMode with
visual class = 0 (32775), nplanes = 8
18:32:07 localhost Xprt_33: Could not init font path element
/usr/X11R6/lib/X11/fonts/local, removing from list!
18:32:09 localhost kernel: cpufreq: Detected nForce2 chipset revision C1
18:32:09 localhost kernel: cpufreq: FSB changing is maybe unstable and
can lead to crashes and data loss.
18:32:09 localhost kernel: cpufreq: FSB currently at 150 MHz, FID 11.0
18:32:11 localhost kernel: [fglrx] Maximum main memory to use for locked
dma buffers: 430 MBytes.
18:32:11 localhost kernel: ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
18:32:11 localhost kernel: ACPI: PCI Interrupt 0000:02:00.0[A] -> Link
[APC4] -> GSI 19 (level, high) -> IRQ 201
18:32:11 localhost kernel: [fglrx] module loaded - fglrx 8.16.20 [Aug 16
2005] on minor 0
18:32:11 localhost kernel: [fglrx] Kernel AGP support doesn't provide
agplock functionality.
18:32:11 localhost kernel: [fglrx] AGP detected, AgpState = 0x1f00421b
(hardware caps of chipset)
18:32:11 localhost kernel: agpgart: Found an AGP 3.0 compliant device at
0000:00:00.0.
18:32:11 localhost kernel: agpgart: Putting AGP V3 device at
0000:00:00.0 into 8x mode
18:32:11 localhost kernel: agpgart: Putting AGP V3 device at
0000:02:00.0 into 8x mode
18:32:11 localhost kernel: [fglrx] AGP enabled, AgpCommand = 0x1f004312
(selected caps)
18:32:11 localhost kernel: [fglrx] free AGP = 121909248
18:32:11 localhost kernel: [fglrx] max AGP = 121909248
18:32:11 localhost kernel: [fglrx] free LFB = 108974080
18:32:11 localhost kernel: [fglrx] max LFB = 108974080
18:32:11 localhost kernel: [fglrx] free Inv = 0
18:32:11 localhost kernel: [fglrx] max Inv = 0
18:32:11 localhost kernel: [fglrx] total Inv = 0
18:32:11 localhost kernel: [fglrx] total TIM = 0
18:32:11 localhost kernel: [fglrx] total FB = 0
18:32:11 localhost kernel: [fglrx] total AGP = 32768
18:34:35 localhost kernel: usb 3-2: new full speed USB device using
ohci_hcd and address 3
Found a fwe more usb in "/var/log/syslog":
...
...
Sep 17 18:32:11 localhost kernel: [fglrx] total FB = 0
Sep 17 18:32:11 localhost kernel: [fglrx] total AGP = 32768
Sep 17 18:32:16 localhost kernel: eth0: no IPv6 routers present
Sep 17 18:32:19 localhost modprobe: FATAL: Error running install command
for sound_slot_1
Sep 17 18:32:19 localhost modprobe: FATAL: Error running install command
for sound_slot_2
Sep 17 18:32:19 localhost modprobe: FATAL: Error running install command
for sound_slot_3
Sep 17 18:34:35 localhost kernel: hub 1-0:1.0: state 5 ports 6 chg 0000
evt 0010
Sep 17 18:34:35 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port
4 status 001803 POWER sig=j CSC CONNECT
Sep 17 18:34:35 localhost kernel: hub 1-0:1.0: port 4, status 0501,
change 0001, 480 Mb/s
Sep 17 18:34:35 localhost kernel: hub 1-0:1.0: debounce: port 4: total
100ms stable 100ms status 0x501
Sep 17 18:34:35 localhost kernel: ehci_hcd 0000:00:02.2: port 4 full
speed --> companion
Sep 17 18:34:35 localhost kernel: ehci_hcd 0000:00:02.2: GetStatus port
4 status 003001 POWER OWNER sig=se0 CONNECT
Sep 17 18:34:35 localhost kernel: hub 1-0:1.0: port_wait_reset: err = -107
Sep 17 18:34:35 localhost kernel: hub 3-0:1.0: state 5 ports 3 chg 0000
evt 0004
Sep 17 18:34:35 localhost kernel: ohci_hcd 0000:00:02.1: GetStatus
roothub.portstatus [1] = 0x00010101 CSC PPS CCS
Sep 17 18:34:35 localhost kernel: hub 3-0:1.0: port 2, status 0101,
change 0001, 12 Mb/s
Sep 17 18:34:35 localhost kernel: hub 3-0:1.0: debounce: port 2: total
100ms stable 100ms status 0x101
Sep 17 18:34:35 localhost kernel: ohci_hcd 0000:00:02.1: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Sep 17 18:34:35 localhost kernel: usb 3-2: new full speed USB device
using ohci_hcd and address 3
Sep 17 18:34:35 localhost kernel: ohci_hcd 0000:00:02.1: GetStatus
roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
Sep 17 18:34:35 localhost kernel: usb 3-2: skipped 1 descriptor after
interface
Sep 17 18:34:35 localhost kernel: usb 3-2: new device strings: Mfr=0,
Product=0, SerialNumber=0
Sep 17 18:34:35 localhost kernel: usb 3-2: hotplug
Sep 17 18:34:36 localhost kernel: usb 3-2: adding 3-2:1.0 (config #1,
interface 0)
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.0: usb_probe_interface
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.0: usb_probe_interface -
got id
Sep 17 18:34:36 localhost kernel: usb 3-2:1.0: hotplug
Sep 17 18:34:36 localhost kernel: usb 3-2: adding 3-2:1.1 (config #1,
interface 1)
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.1: usb_probe_interface
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.1: usb_probe_interface -
got id
Sep 17 18:34:36 localhost kernel: usb 3-2:1.1: hotplug
Sep 17 18:34:36 localhost kernel: usb 3-2: adding 3-2:1.2 (config #1,
interface 2)
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.2: usb_probe_interface
Sep 17 18:34:36 localhost kernel: hci_usb 3-2:1.2: usb_probe_interface -
got id
Sep 17 18:34:36 localhost kernel: usb 3-2:1.2: hotplug
Sep 17 18:34:36 localhost hcid[3330]: HCI dev 0 registered
Sep 17 18:34:36 localhost hcid[3330]: HCI dev 0 up
Sep 17 18:34:36 localhost hcid[3330]: Starting security manager 0
-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
