Danny The board specific base address and data addresses are specified in platform.c for your board. Please have a look at arch/mips/au1000/common/platform.c for more details.
Regards Vivek -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Danny Budik Sent: Tuesday, September 27, 2005 1:37 PM To: [email protected] Subject: [Linux-usb-users] sl811hs driver I am wondering if anyone has used the recent sl811hs driver written by David Brownwell that was added to the 2.6.10 kernel? If so, with what board and processor did you use it on? Each board design has its own specific base and data addresses as well as the irq. When using the driver, where do you specify these 3 values so the OS knows to look for a device there. It seems to me that it's in a config file somewhere but I can't find it. I am using the uClinux with the Blackfin STAMP board with my own daughter-board that has the sl811hs Cypress USB host/slave chip on there. Regards, Danny -- Inductive Signature Technologies, Inc. http://www.ist-traffic.com (865) 673-9434 ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
