For the card, hanging lspci doesn't sound good. Could it be broken?

How did you connect up the panel?

On Thu, 20 Oct 2005, Travis H. wrote:

> I have a Zonet ZUC2400RT controller card described here:
>
> http://www.newegg.com/Product/Product.asp?Item=N82E16815106004
> http://www.zonetusa.com/DispProduct.asp?ProductID=88
>
> I bought it because it said:
>
> "Compliant with USB 2.0 Spec.
> Compliant with OHCI spec for USB Rev. 1.0a."
>
> However, I tried installing it, and it appears as a bus (I think), but
> "lspci -v" hangs and plugging devices into it doesn't trigger the
> appropriate events.  I think I had udevd running but not hotplug; I'll
> check that when I get home.
>
> I also bought this:
>
> http://www.heisei.com.tw/products/4-port_usb2_0_panel_hub/
>
> However, plugging a USB drive into that doesn't cause it to appear as
> a /dev/sd[a-z] the way it does when I plug it into the motherboard's
> built-in USB 1.0 sockets.
>
> Note that everything works fine with the motherboard's built-in USB 1.0 
> sockets.
>
> I am using a custom 2.6.13 kernel from kernel.org.
>
> What step should I take next to get this working?
> Bear in mind that "lspci -v" is hanging.
> I'll try it without -v when I get home if that will help.
> However, I have posted in case someone already knows this hardware
> will/won't work.
>
> Thank you,
> Travis
> --
> http://www.lightconsulting.com/~travis/  -><-
> "We already have enough fast, insecure systems." -- Schneier & Ferguson
> GPG fingerprint: 50A1 15C5 A9DE 23B9 ED98 C93E 38E9 204A 94C2 641B
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> [email protected]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>

--
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/


-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to