i've got an usb stick over here... (128MB , lsusb says: Bus 001 Device 017: ID 090c:1000 Feiya Technology Corp.) dmesg output: usb-storage: device found at 16 usb-storage: waiting for device to settle before scanning Vendor: USB Model: DISK Pro Rev: 3000 Type: CD-ROM ANSI SCSI revision: 02 sr0: scsi3-mmc drive: 2x/4x writer caddy A ttached scsi CD-ROM sr0 at scsi10, channel 0, id 0, lun 0 usb-storage: device scan complete
ssh agent says the following: Oct 19 09:42:38 lois scsi.agent[15451]: cdrom at /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/host12/target12:0:0/12:0:0 :0 fstab-sync: Oct 19 09:42:38 lois fstab-sync[15496]: added mount point /media/cdrecorder1 for /dev/scd0 it adds a scsi cdrom entry to fstab (some script) when i mount the device and do an ls (compared to /proc/bus/usb): : 17:19 lois bus/usb ;find /proc/bus/usb/ /proc/bus/usb/ /proc/bus/usb/005 /proc/bus/usb/005/001 /proc/bus/usb/004 /proc/bus/usb/004/001 /proc/bus/usb/003 /proc/bus/usb/003/002 /proc/bus/usb/003/001 /proc/bus/usb/002 /proc/bus/usb/002/001 /proc/bus/usb/001 /proc/bus/usb/001/014 /proc/bus/usb/001/006 /proc/bus/usb/001/005 /proc/bus/usb/001/004 /proc/bus/usb/001/002 /proc/bus/usb/001/001 /proc/bus/usb/devices : 17:19 lois bus/usb ;mount -t usbfs /dev/scd0 /mnt/test : 17:19 lois bus/usb ;find /mnt/test /mnt/test /mnt/test/005 /mnt/test/005/001 /mnt/test/004 /mnt/test/004/001 /mnt/test/003 /mnt/test/003/002 /mnt/test/003/001 /mnt/test/002 /mnt/test/002/001 /mnt/test/001 /mnt/test/001/014 /mnt/test/001/006 /mnt/test/001/005 /mnt/test/001/004 /mnt/test/001/002 /mnt/test/001/001 /mnt/test/devices so, i think the usb stick thinks it's a cdrom device. i don't know enough about usb.handmap or so to make the stick available again, or to get the data off... what happened to the stick??? it worked fine at first. it was always connected to a usb hub (together with a cd writer). they unplugged the cd writer, and now this is what happened to the usb stick... (it's not mine, but a collegue's, so i don't know the specific details) off course i tested it without the hub, on my own computer... do you have any ideas??? (in windows, it recognises the usb stick's original stuff... some stupid flash animation thing), but the files are all gone there. is there a way to solve/explain this? can i try something else??? can i dump it's contents??? -- harry aka Rik Bobbaers K.U.Leuven - LUDIT -=- Tel: +32 485 52 71 50 [EMAIL PROTECTED] -=- http://harry.ulyssis.org Disclaimer: By sending an email to ANY of my addresses you are agreeing that: 1. I am by definition, "the intended recipient" 2. All information in the email is mine to do with as I see fit and make such financial profit, political mileage, or good joke as it lends itself to. In particular, I may quote it on usenet. 3. I may take the contents as representing the views of your company. 4. This overrides any disclaimer or statement of confidentiality that may be included on your message. Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
