I plugged my nano in during bootup on my main x86_64 machine and it never got attached.
The dmesg log was: [ 52.895692] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 [ 52.896431] GSI 19 sharing vector 0xC1 and IRQ 19 [ 52.896436] ACPI: PCI Interrupt 0000:01:03.2[C] -> GSI 16 (level, low) -> IRQ 193 [ 52.897216] ehci_hcd 0000:01:03.2: EHCI Host Controller [ 52.897228] ehci_hcd 0000:01:03.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 [ 52.897237] ehci_hcd 0000:01:03.2: reset portroute 1 0 1 0 0 [ 52.897241] ehci_hcd 0000:01:03.2: reset hcc_params e806 thresh 0 uframes 256/512/1024 park [ 52.897287] ehci_hcd 0000:01:03.2: park 0 [ 52.897302] ehci_hcd 0000:01:03.2: capability 0001 at e8 [ 52.897308] ehci_hcd 0000:01:03.2: MWI active [ 52.897311] ehci_hcd 0000:01:03.2: ...powerdown ports... [ 52.918875] drivers/usb/core/inode.c: creating file 'devices' [ 52.918881] drivers/usb/core/inode.c: creating file '001' [ 52.918885] ehci_hcd 0000:01:03.2: new USB bus registered, assigned bus number 1 [ 52.918899] ehci_hcd 0000:01:03.2: irq 193, io mem 0xf0050000 [ 52.918908] ehci_hcd 0000:01:03.2: reset command 080b02 park=3 ithresh=8 period=1024 Reset HALT [ 52.918916] ehci_hcd 0000:01:03.2: init command 010009 (park)=0 ithresh=1 period=256 RUN [ 52.918922] ehci_hcd 0000:01:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 52.918945] usb usb1: default language 0x0409 [ 52.918952] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 52.918955] usb usb1: Product: EHCI Host Controller [ 52.918957] usb usb1: Manufacturer: Linux 2.6.16-rc1 ehci_hcd [ 52.918959] usb usb1: SerialNumber: 0000:01:03.2 [ 52.918970] usb usb1: uevent [ 52.919966] usb usb1: device is self-powered [ 52.919968] usb usb1: configuration #1 chosen from 1 choice [ 52.919975] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 52.919981] usb 1-0:1.0: uevent [ 52.920053] hub 1-0:1.0: usb_probe_interface [ 52.920055] hub 1-0:1.0: usb_probe_interface - got id [ 52.920058] hub 1-0:1.0: USB hub found [ 52.920068] hub 1-0:1.0: 5 ports detected [ 52.920070] hub 1-0:1.0: standalone hub [ 52.920072] hub 1-0:1.0: individual port power switching [ 52.920074] hub 1-0:1.0: individual port over-current protection [ 52.920076] hub 1-0:1.0: Single TT [ 52.920079] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 52.920081] hub 1-0:1.0: power on to power good time: 20ms [ 52.920086] hub 1-0:1.0: local power source is good [ 52.920089] hub 1-0:1.0: enabling power on all ports [ 53.021365] hub 1-0:1.0: state 5 ports 5 chg 0000 evt 0000 [ 53.021412] drivers/usb/core/inode.c: creating file '001' [ 53.021459] ehci_hcd 0000:01:03.2: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT [ 53.021467] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s [ 53.037114] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) [ 53.037120] ohci_hcd: block sizes: ed 80 td 96 [ 53.037240] GSI 20 sharing vector 0xC9 and IRQ 20 [ 53.037245] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 18 (level, low) -> IRQ 201 [ 53.038076] ohci_hcd 0000:01:03.0: OHCI Host Controller [ 53.039213] drivers/usb/core/inode.c: creating file '002' [ 53.039221] ohci_hcd 0000:01:03.0: new USB bus registered, assigned bus number 2 [ 53.039234] ohci_hcd 0000:01:03.0: irq 201, io mem 0xf0030000 [ 53.039242] ohci_hcd 0000:01:03.0: resetting from state 'reset', control = 0x0 [ 53.120246] ohci_hcd 0000:01:03.0: OHCI controller state [ 53.120250] ohci_hcd 0000:01:03.0: OHCI 1.0, NO legacy support registers [ 53.120255] ohci_hcd 0000:01:03.0: control 0x083 HCFS=operational CBSR=3 [ 53.120259] ohci_hcd 0000:01:03.0: cmdstatus 0x00000 SOC=0 [ 53.120263] ohci_hcd 0000:01:03.0: intrstatus 0x00000004 SF [ 53.120268] ohci_hcd 0000:01:03.0: intrenable 0x8000001a MIE UE RD WDH [ 53.120277] ohci_hcd 0000:01:03.0: hcca frame #001f [ 53.120281] ohci_hcd 0000:01:03.0: roothub.a 0f000203 POTPGT=15 NPS NDP=3(3) [ 53.120285] ohci_hcd 0000:01:03.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 53.120289] ohci_hcd 0000:01:03.0: roothub.status 00008000 DRWE [ 53.120294] ohci_hcd 0000:01:03.0: roothub.portstatus [0] 0x00000100 PPS [ 53.120298] ohci_hcd 0000:01:03.0: roothub.portstatus [1] 0x00000100 PPS [ 53.120302] ohci_hcd 0000:01:03.0: roothub.portstatus [2] 0x00000100 PPS [ 53.120308] ohci_hcd 0000:01:03.0: created debug files [ 53.120322] usb usb2: default language 0x0409 [ 53.120329] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 53.120332] usb usb2: Product: OHCI Host Controller [ 53.120334] usb usb2: Manufacturer: Linux 2.6.16-rc1 ohci_hcd [ 53.120336] usb usb2: SerialNumber: 0000:01:03.0 [ 53.120347] usb usb2: uevent [ 53.120482] usb usb2: device is self-powered [ 53.120484] usb usb2: configuration #1 chosen from 1 choice [ 53.120490] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 53.120497] usb 2-0:1.0: uevent [ 53.121350] hub 2-0:1.0: usb_probe_interface [ 53.121352] hub 2-0:1.0: usb_probe_interface - got id [ 53.121354] hub 2-0:1.0: USB hub found [ 53.121366] hub 2-0:1.0: 3 ports detected [ 53.121368] hub 2-0:1.0: standalone hub [ 53.121370] hub 2-0:1.0: no power switching (usb 1.0) [ 53.121372] hub 2-0:1.0: global over-current protection [ 53.121375] hub 2-0:1.0: power on to power good time: 30ms [ 53.121381] hub 2-0:1.0: local power source is good [ 53.121384] hub 2-0:1.0: no over-current condition exists [ 53.127248] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501 [ 53.178340] ehci_hcd 0000:01:03.2: port 5 high speed [ 53.178346] ehci_hcd 0000:01:03.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 53.222720] drivers/usb/core/inode.c: creating file '001' [ 53.222757] GSI 21 sharing vector 0xD1 and IRQ 21 [ 53.222761] ACPI: PCI Interrupt 0000:01:03.1[B] -> GSI 19 (level, low) -> IRQ 209 [ 53.223100] ohci_hcd 0000:01:03.1: OHCI Host Controller [ 53.224065] drivers/usb/core/inode.c: creating file '003' [ 53.224073] ohci_hcd 0000:01:03.1: new USB bus registered, assigned bus number 3 [ 53.224087] ohci_hcd 0000:01:03.1: irq 209, io mem 0xf0040000 [ 53.224095] ohci_hcd 0000:01:03.1: resetting from state 'reset', control = 0x0 [ 53.229176] usb 1-5: new high speed USB device using ehci_hcd and address 2 [ 53.281256] ehci_hcd 0000:01:03.2: port 5 high speed [ 53.281261] ehci_hcd 0000:01:03.2: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT [ 53.305075] ohci_hcd 0000:01:03.1: OHCI controller state [ 53.305079] ohci_hcd 0000:01:03.1: OHCI 1.0, NO legacy support registers [ 53.305084] ohci_hcd 0000:01:03.1: control 0x083 HCFS=operational CBSR=3 [ 53.305088] ohci_hcd 0000:01:03.1: cmdstatus 0x00000 SOC=0 [ 53.305092] ohci_hcd 0000:01:03.1: intrstatus 0x00000004 SF [ 53.305097] ohci_hcd 0000:01:03.1: intrenable 0x8000001a MIE UE RD WDH [ 53.305106] ohci_hcd 0000:01:03.1: hcca frame #001f [ 53.305110] ohci_hcd 0000:01:03.1: roothub.a 0f000202 POTPGT=15 NPS NDP=2(2) [ 53.305114] ohci_hcd 0000:01:03.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 53.305118] ohci_hcd 0000:01:03.1: roothub.status 00008000 DRWE [ 53.305123] ohci_hcd 0000:01:03.1: roothub.portstatus [0] 0x00000100 PPS [ 53.305128] ohci_hcd 0000:01:03.1: roothub.portstatus [1] 0x00000100 PPS [ 53.305133] ohci_hcd 0000:01:03.1: created debug files [ 53.305152] usb usb3: default language 0x0409 [ 53.305159] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 [ 53.305162] usb usb3: Product: OHCI Host Controller [ 53.305164] usb usb3: Manufacturer: Linux 2.6.16-rc1 ohci_hcd [ 53.305166] usb usb3: SerialNumber: 0000:01:03.1 [ 53.305177] usb usb3: uevent [ 53.305694] usb usb3: device is self-powered [ 53.305697] usb usb3: configuration #1 chosen from 1 choice [ 53.305703] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 53.305712] usb 3-0:1.0: uevent [ 53.306193] hub 3-0:1.0: usb_probe_interface [ 53.306196] hub 3-0:1.0: usb_probe_interface - got id [ 53.306198] hub 3-0:1.0: USB hub found [ 53.306210] hub 3-0:1.0: 2 ports detected [ 53.306212] hub 3-0:1.0: standalone hub [ 53.306214] hub 3-0:1.0: no power switching (usb 1.0) [ 53.306216] hub 3-0:1.0: global over-current protection [ 53.306219] hub 3-0:1.0: power on to power good time: 30ms [ 53.306225] hub 3-0:1.0: local power source is good [ 53.306227] hub 3-0:1.0: no over-current condition exists [ 53.346481] usb 1-5: skipped 1 descriptor after interface [ 53.346730] usb 1-5: default language 0x0409 [ 53.347356] usb 1-5: new device strings: Mfr=1, Product=2, SerialNumber=3 [ 53.347358] usb 1-5: Product: iPod [ 53.347360] usb 1-5: Manufacturer: Apple [ 53.347362] usb 1-5: SerialNumber: 000A2700128B0C1C [ 53.347372] usb 1-5: uevent [ 53.347608] usb 1-5: device is bus-powered [ 53.347610] usb 1-5: configuration #1 chosen from 2 choices [ 53.347881] usb 1-5: adding 1-5:1.0 (config #1, interface 0) [ 53.347889] usb 1-5:1.0: uevent [ 53.348869] drivers/usb/core/inode.c: creating file '002' [ 53.348878] hub 2-0:1.0: state 5 ports 3 chg 0000 evt 0000 [ 53.407004] hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0000 [ 53.407468] drivers/usb/core/inode.c: creating file '001' [ 55.103724] libusual 1-5:1.0: usb_probe_interface [ 55.103729] libusual 1-5:1.0: usb_probe_interface - got id [ 55.103753] usbcore: registered new driver libusual [ 55.174481] Initializing USB Mass Storage driver... [ 55.175260] usb-storage 1-5:1.0: usb_probe_interface [ 55.175264] usb-storage 1-5:1.0: usb_probe_interface - got id [ 55.175267] usb-storage: USB Mass Storage device detected [ 55.175294] usb-storage: -- associate_dev [ 55.175297] usb-storage: Vendor: 0x05ac, Product: 0x120a, Revision: 0x0001 [ 55.175300] usb-storage: Interface Subclass: 0x06, Protocol: 0x50 [ 55.175308] usb-storage: Transport: Bulk [ 55.175311] usb-storage: Protocol: Transparent SCSI [ 55.175336] scsi2 : SCSI emulation for USB Mass Storage devices [ 55.175399] usb-storage: *** thread sleeping. [ 55.176954] usbcore: registered new driver usb-storage [ 55.176958] USB Mass Storage support registered. [ 55.176973] usb-storage: device found at 2 [ 55.176975] usb-storage: waiting for device to settle before scanning [ 55.498765] ACPI: Power Button (FF) [PWRF] [ 55.498778] ACPI: Sleep Button (FF) [SLPF] [ 55.498791] ACPI: Power Button (CM) [PWRB] [ 55.519120] Using specific hotkey driver [ 56.015576] EXT3 FS on sda2, internal journal [ 56.119420] kjournald starting. Commit interval 5 seconds [ 56.119885] EXT3 FS on sda1, internal journal [ 56.119892] EXT3-fs: mounted filesystem with ordered data mode. [ 56.132287] kjournald starting. Commit interval 5 seconds [ 56.132511] EXT3 FS on sda5, internal journal [ 56.132514] EXT3-fs: mounted filesystem with ordered data mode. [ 56.745905] Adding 4192956k swap on /dev/sda3. Priority:-1 extents:1 across:4192956k [ 59.386779] IPv4 FIB: Using LC-trie version 0.404 [ 60.171699] usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 [ 60.172241] usb-storage: GetMaxLUN command result is 1, data is 0 [ 60.172303] usb-storage: queuecommand called [ 60.172310] usb-storage: *** thread awakened. [ 60.172313] usb-storage: Command INQUIRY (6 bytes) [ 60.172315] usb-storage: 12 00 00 00 24 00 [ 60.172321] usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 [ 60.172325] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.172489] usb-storage: Status code 0; transferred 31/31 [ 60.172491] usb-storage: -- transfer complete [ 60.172493] usb-storage: Bulk command transfer result=0 [ 60.172496] usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries [ 60.172737] usb-storage: Status code 0; transferred 36/36 [ 60.172739] usb-storage: -- transfer complete [ 60.172741] usb-storage: Bulk data transfer result 0x0 [ 60.172743] usb-storage: Attempting to get CSW... [ 60.172745] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.172984] usb-storage: Status code 0; transferred 13/13 [ 60.172986] usb-storage: -- transfer complete [ 60.172988] usb-storage: Bulk status result = 0 [ 60.172990] usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0 [ 60.172994] usb-storage: scsi cmd done, result=0x0 [ 60.172997] usb-storage: *** thread sleeping. [ 60.173014] Vendor: Apple Model: iPod Rev: 1.62 [ 60.193316] Type: Direct-Access ANSI SCSI revision: 00 [ 60.238508] usb-storage: queuecommand called [ 60.238513] usb-storage: *** thread awakened. [ 60.238515] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 60.238517] usb-storage: 00 00 00 00 00 00 [ 60.238522] usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6 [ 60.238525] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.239165] usb-storage: Status code 0; transferred 31/31 [ 60.239167] usb-storage: -- transfer complete [ 60.239169] usb-storage: Bulk command transfer result=0 [ 60.239171] usb-storage: Attempting to get CSW... [ 60.239173] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.239669] usb-storage: Status code 0; transferred 13/13 [ 60.239671] usb-storage: -- transfer complete [ 60.239673] usb-storage: Bulk status result = 0 [ 60.239675] usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x0 [ 60.239678] usb-storage: scsi cmd done, result=0x0 [ 60.239681] usb-storage: *** thread sleeping. [ 60.239692] usb-storage: queuecommand called [ 60.239696] usb-storage: *** thread awakened. [ 60.239698] usb-storage: Command READ_CAPACITY (10 bytes) [ 60.239700] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 60.239706] usb-storage: Bulk Command S 0x43425355 T 0x3 L 8 F 128 Trg 0 LUN 0 CL 10 [ 60.239708] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.239914] usb-storage: Status code 0; transferred 31/31 [ 60.239916] usb-storage: -- transfer complete [ 60.239918] usb-storage: Bulk command transfer result=0 [ 60.239920] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 60.240167] usb-storage: Status code 0; transferred 8/8 [ 60.240169] usb-storage: -- transfer complete [ 60.240171] usb-storage: Bulk data transfer result 0x0 [ 60.240173] usb-storage: Attempting to get CSW... [ 60.240175] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.240289] usb-storage: Status code 0; transferred 13/13 [ 60.240291] usb-storage: -- transfer complete [ 60.240292] usb-storage: Bulk status result = 0 [ 60.240295] usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0 [ 60.240298] usb-storage: scsi cmd done, result=0x0 [ 60.240300] usb-storage: *** thread sleeping. [ 60.240309] SCSI device sdb: 7999487 512-byte hdwr sectors (4096 MB) [ 60.261085] usb-storage: queuecommand called [ 60.261151] usb-storage: *** thread awakened. [ 60.261153] usb-storage: Command MODE_SENSE (6 bytes) [ 60.261155] usb-storage: 1a 00 3f 00 c0 00 [ 60.261160] usb-storage: Bulk Command S 0x43425355 T 0x4 L 192 F 128 Trg 0 LUN 0 CL 6 [ 60.261163] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.261311] usb-storage: Status code 0; transferred 31/31 [ 60.261313] usb-storage: -- transfer complete [ 60.261314] usb-storage: Bulk command transfer result=0 [ 60.261317] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 60.261645] usb-storage: Status code -121; transferred 105/192 [ 60.261648] usb-storage: -- short read transfer [ 60.261649] usb-storage: Bulk data transfer result 0x1 [ 60.261651] usb-storage: Attempting to get CSW... [ 60.261654] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.261894] usb-storage: Status code -32; transferred 0/13 [ 60.261897] usb-storage: clearing endpoint halt for pipe 0xc0010280 [ 60.261900] usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 [ 60.262140] usb-storage: usb_stor_clear_halt: result = 0 [ 60.262143] usb-storage: Attempting to get CSW (2nd try)... [ 60.262145] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.262268] usb-storage: Status code 0; transferred 13/13 [ 60.262270] usb-storage: -- transfer complete [ 60.262272] usb-storage: Bulk status result = 0 [ 60.262275] usb-storage: Bulk Status S 0x53425355 T 0x4 R 87 Stat 0x0 [ 60.262277] usb-storage: scsi cmd done, result=0x0 [ 60.262280] usb-storage: *** thread sleeping. [ 60.262287] sdb: Write Protect is off [ 60.282885] sdb: Mode Sense: 68 00 00 08 [ 60.282887] sdb: assuming drive cache: write through [ 60.303611] usb-storage: queuecommand called [ 60.303616] usb-storage: *** thread awakened. [ 60.303618] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 60.303620] usb-storage: 00 00 00 00 00 00 [ 60.303624] usb-storage: Bulk Command S 0x43425355 T 0x5 L 0 F 0 Trg 0 LUN 0 CL 6 [ 60.303627] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.303974] usb-storage: Status code 0; transferred 31/31 [ 60.303976] usb-storage: -- transfer complete [ 60.303978] usb-storage: Bulk command transfer result=0 [ 60.303980] usb-storage: Attempting to get CSW... [ 60.303982] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.304223] usb-storage: Status code 0; transferred 13/13 [ 60.304225] usb-storage: -- transfer complete [ 60.304227] usb-storage: Bulk status result = 0 [ 60.304230] usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0 [ 60.304232] usb-storage: scsi cmd done, result=0x0 [ 60.304235] usb-storage: *** thread sleeping. [ 60.304244] usb-storage: queuecommand called [ 60.304248] usb-storage: *** thread awakened. [ 60.304250] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 60.304252] usb-storage: 1e 00 00 00 01 00 [ 60.304257] usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6 [ 60.304259] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.304471] usb-storage: Status code 0; transferred 31/31 [ 60.304473] usb-storage: -- transfer complete [ 60.304475] usb-storage: Bulk command transfer result=0 [ 60.304477] usb-storage: Attempting to get CSW... [ 60.304479] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.304599] usb-storage: Status code 0; transferred 13/13 [ 60.304601] usb-storage: -- transfer complete [ 60.304603] usb-storage: Bulk status result = 0 [ 60.304605] usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x0 [ 60.304608] usb-storage: scsi cmd done, result=0x0 [ 60.304611] usb-storage: *** thread sleeping. [ 60.304633] usb-storage: queuecommand called [ 60.304636] usb-storage: *** thread awakened. [ 60.304639] usb-storage: Command TEST_UNIT_READY (6 bytes) [ 60.304640] usb-storage: 00 00 00 00 00 00 [ 60.304645] usb-storage: Bulk Command S 0x43425355 T 0x7 L 0 F 0 Trg 0 LUN 0 CL 6 [ 60.304648] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.304843] usb-storage: Status code 0; transferred 31/31 [ 60.304845] usb-storage: -- transfer complete [ 60.304847] usb-storage: Bulk command transfer result=0 [ 60.304849] usb-storage: Attempting to get CSW... [ 60.304851] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.304973] usb-storage: Status code 0; transferred 13/13 [ 60.304974] usb-storage: -- transfer complete [ 60.304976] usb-storage: Bulk status result = 0 [ 60.304979] usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0 [ 60.304981] usb-storage: scsi cmd done, result=0x0 [ 60.304984] usb-storage: *** thread sleeping. [ 60.304992] usb-storage: queuecommand called [ 60.304995] usb-storage: *** thread awakened. [ 60.304998] usb-storage: Command READ_CAPACITY (10 bytes) [ 60.304999] usb-storage: 25 00 00 00 00 00 00 00 00 00 [ 60.305005] usb-storage: Bulk Command S 0x43425355 T 0x8 L 8 F 128 Trg 0 LUN 0 CL 10 [ 60.305008] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.305218] usb-storage: Status code 0; transferred 31/31 [ 60.305220] usb-storage: -- transfer complete [ 60.305222] usb-storage: Bulk command transfer result=0 [ 60.305224] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8 bytes, 1 entries [ 60.305472] usb-storage: Status code 0; transferred 8/8 [ 60.305474] usb-storage: -- transfer complete [ 60.305476] usb-storage: Bulk data transfer result 0x0 [ 60.305478] usb-storage: Attempting to get CSW... [ 60.305480] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.305636] usb-storage: Status code 0; transferred 13/13 [ 60.305638] usb-storage: -- transfer complete [ 60.305640] usb-storage: Bulk status result = 0 [ 60.305643] usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x0 [ 60.305645] usb-storage: scsi cmd done, result=0x0 [ 60.305648] usb-storage: *** thread sleeping. [ 60.305656] SCSI device sdb: 7999487 512-byte hdwr sectors (4096 MB) [ 60.326455] usb-storage: queuecommand called [ 60.326461] usb-storage: *** thread awakened. [ 60.326463] usb-storage: Command MODE_SENSE (6 bytes) [ 60.326465] usb-storage: 1a 00 3f 00 c0 00 [ 60.326470] usb-storage: Bulk Command S 0x43425355 T 0x9 L 192 F 128 Trg 0 LUN 0 CL 6 [ 60.326473] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.326572] usb-storage: Status code 0; transferred 31/31 [ 60.326574] usb-storage: -- transfer complete [ 60.326576] usb-storage: Bulk command transfer result=0 [ 60.326579] usb-storage: usb_stor_bulk_transfer_sglist: xfer 192 bytes, 1 entries [ 60.326826] usb-storage: Status code -121; transferred 105/192 [ 60.326828] usb-storage: -- short read transfer [ 60.326830] usb-storage: Bulk data transfer result 0x1 [ 60.326832] usb-storage: Attempting to get CSW... [ 60.326834] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.327075] usb-storage: Status code -32; transferred 0/13 [ 60.327077] usb-storage: clearing endpoint halt for pipe 0xc0010280 [ 60.327080] usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=82 len=0 [ 60.327321] usb-storage: usb_stor_clear_halt: result = 0 [ 60.327323] usb-storage: Attempting to get CSW (2nd try)... [ 60.327326] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.327499] usb-storage: Status code 0; transferred 13/13 [ 60.327501] usb-storage: -- transfer complete [ 60.327503] usb-storage: Bulk status result = 0 [ 60.327506] usb-storage: Bulk Status S 0x53425355 T 0x9 R 87 Stat 0x0 [ 60.327509] usb-storage: scsi cmd done, result=0x0 [ 60.327512] usb-storage: *** thread sleeping. [ 60.327561] sdb: Write Protect is off [ 60.348252] sdb: Mode Sense: 68 00 00 08 [ 60.348254] sdb: assuming drive cache: write through [ 60.369299] sdb:<7>usb-storage: queuecommand called [ 60.369342] usb-storage: *** thread awakened. [ 60.369349] usb-storage: Command READ_10 (10 bytes) [ 60.369351] usb-storage: 28 00 00 00 00 00 00 00 01 00 [ 60.369360] usb-storage: Bulk Command S 0x43425355 T 0xa L 512 F 128 Trg 0 LUN 0 CL 10 [ 60.369363] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.369663] usb-storage: Status code 0; transferred 31/31 [ 60.369666] usb-storage: -- transfer complete [ 60.369668] usb-storage: Bulk command transfer result=0 [ 60.369671] usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries [ 60.372278] usb-storage: Status code 0; transferred 512/512 [ 60.372280] usb-storage: -- transfer complete [ 60.372282] usb-storage: Bulk data transfer result 0x0 [ 60.372284] usb-storage: Attempting to get CSW... [ 60.372286] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.372398] usb-storage: Status code 0; transferred 13/13 [ 60.372400] usb-storage: -- transfer complete [ 60.372402] usb-storage: Bulk status result = 0 [ 60.372405] usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x0 [ 60.372408] usb-storage: scsi cmd done, result=0x0 [ 60.372410] usb-storage: *** thread sleeping. [ 60.372418] usb-storage: queuecommand called [ 60.372421] usb-storage: *** thread awakened. [ 60.372423] usb-storage: Command READ_10 (10 bytes) [ 60.372425] usb-storage: 28 00 00 00 00 01 00 00 07 00 [ 60.372432] usb-storage: Bulk Command S 0x43425355 T 0xb L 3584 F 128 Trg 0 LUN 0 CL 10 [ 60.372434] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.372651] usb-storage: Status code 0; transferred 31/31 [ 60.372653] usb-storage: -- transfer complete [ 60.372655] usb-storage: Bulk command transfer result=0 [ 60.372657] usb-storage: usb_stor_bulk_transfer_sglist: xfer 3584 bytes, 1 entries [ 60.373148] usb-storage: Status code 0; transferred 3584/3584 [ 60.373150] usb-storage: -- transfer complete [ 60.373152] usb-storage: Bulk data transfer result 0x0 [ 60.373154] usb-storage: Attempting to get CSW... [ 60.373156] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.373397] usb-storage: Status code 0; transferred 13/13 [ 60.373399] usb-storage: -- transfer complete [ 60.373401] usb-storage: Bulk status result = 0 [ 60.373404] usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0 [ 60.373406] usb-storage: scsi cmd done, result=0x0 [ 60.373408] usb-storage: *** thread sleeping. [ 60.373418] sdb1 sdb2 [ 60.397516] usb-storage: queuecommand called [ 60.397522] usb-storage: *** thread awakened. [ 60.397525] usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) [ 60.397527] usb-storage: 1e 00 00 00 00 00 [ 60.397532] usb-storage: Bulk Command S 0x43425355 T 0xc L 0 F 0 Trg 0 LUN 0 CL 6 [ 60.397535] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes [ 60.397626] usb-storage: Status code 0; transferred 31/31 [ 60.397628] usb-storage: -- transfer complete [ 60.397630] usb-storage: Bulk command transfer result=0 [ 60.397632] usb-storage: Attempting to get CSW... [ 60.397634] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes [ 60.397879] usb-storage: Status code 0; transferred 13/13 [ 60.397881] usb-storage: -- transfer complete [ 60.397883] usb-storage: Bulk status result = 0 [ 60.397885] usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x0 [ 60.397888] usb-storage: scsi cmd done, result=0x0 [ 60.397891] usb-storage: *** thread sleeping. [ 60.397955] sd 2:0:0:0: Attached scsi removable disk sdb [ 60.422337] usb-storage: queuecommand called [ 60.422350] usb-storage: *** thread awakened. [ 60.422355] usb-storage: Bad LUN (0:1) [ 60.422357] usb-storage: scsi cmd done, result=0x40000 [ 60.422360] usb-storage: *** thread sleeping. [ 60.422517] usb-storage: queuecommand called [ 60.422528] usb-storage: *** thread awakened. [ 60.422531] usb-storage: Bad target number (1:0) [ 60.422533] usb-storage: scsi cmd done, result=0x40000 [ 60.422537] usb-storage: *** thread sleeping. [ 60.422576] usb-storage: queuecommand called [ 60.422593] usb-storage: *** thread awakened. [ 60.422595] usb-storage: Bad target number (2:0) [ 60.422597] usb-storage: scsi cmd done, result=0x40000 [ 60.422599] usb-storage: *** thread sleeping. [ 60.422626] usb-storage: queuecommand called [ 60.422637] usb-storage: *** thread awakened. [ 60.422639] usb-storage: Bad target number (3:0) [ 60.422641] usb-storage: scsi cmd done, result=0x40000 [ 60.422643] usb-storage: *** thread sleeping. [ 60.422667] usb-storage: queuecommand called [ 60.422678] usb-storage: *** thread awakened. [ 60.422680] usb-storage: Bad target number (4:0) [ 60.422682] usb-storage: scsi cmd done, result=0x40000 [ 60.422684] usb-storage: *** thread sleeping. [ 60.422717] usb-storage: queuecommand called [ 60.422728] usb-storage: *** thread awakened. [ 60.422730] usb-storage: Bad target number (5:0) [ 60.422732] usb-storage: scsi cmd done, result=0x40000 [ 60.422734] usb-storage: *** thread sleeping. [ 60.422760] usb-storage: queuecommand called [ 60.422771] usb-storage: *** thread awakened. [ 60.422773] usb-storage: Bad target number (6:0) [ 60.422775] usb-storage: scsi cmd done, result=0x40000 [ 60.422777] usb-storage: *** thread sleeping. [ 60.422802] usb-storage: queuecommand called [ 60.422812] usb-storage: *** thread awakened. [ 60.422814] usb-storage: Bad target number (7:0) [ 60.422817] usb-storage: scsi cmd done, result=0x40000 [ 60.422819] usb-storage: *** thread sleeping. [ 60.422827] usb-storage: device scan complete ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
