On Sun, 24 Sep 2006 01:54:55 +0530, "Rupesh Kumar" <[EMAIL PROTECTED]> wrote:
> The following scenario is observed on the USB BUS Analyzer. > > 1. Bulk Out Transaction with (31 Bytes USBC Command) for some > endpoint. I am requesting 4K Data from device. > 2. Then There are lot of Bulk IN/ Bulk OUTs to some other > endpoints(Other Devices). > 3. Then When i am giving a IN to the first end point (For which we > transmitted a BULK OUT 31 Bytes). Device is responding with a STALL.. > 4. After Clearing the HALT On the endpoint. > 5. Then driver is asking for the CSW Status for which the device is > responding with 512 Bytes of Data. This device seems broken (if you're using the normal host drivers, so I can assume nothing wrong with the IN). -- Pete ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ Linux-usb-users@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
