Hello,
I noticed that since upgrade (probably 2.6.17 to 2.6.18, but I'm not
sure - it might happen sooner), the USB bluetooth dongle stopped to work
correctly for the most of time - here is what happens and the device is
not recognized:
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 3
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 4
usb 2-1: device not accepting address 4, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 5
usb 2-1: device not accepting address 5, error -71
However, under some (not-yet-discovered) circumstanced I have been
able to get it working (it was after resuming and the dongle was already
inserted in USB port, but I'm not sure if this helped). USB dongle works
correctly on other system.
The system is x86_64 gentoo with suspend2-sources-2.6.18 kernel
(basically vanilla one with just suspend2 patch). Test was done after
reboot, not resume. Dmesg output is below.
Best regards,
Milan Plzik
Bootdata ok (command line is root=/dev/hda7 resume2=/dev/hda8)
Linux version 2.6.18-suspend2 ([EMAIL PROTECTED]) (gcc version 4.1.1 (Gentoo
4.1.1-r1)) #4 Thu Nov 9 20:53:17 CET 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
BIOS-e820: 000000001ff70000 - 000000001ff7a000 (ACPI data)
BIOS-e820: 000000001ff7a000 - 000000001ff80000 (ACPI NVS)
BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
DMI 2.3 present.
ACPI: RSDP (v000 PTLTD ) @
0x00000000000f6a60
ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x000000001ff73fbd
ACPI: FADT (v002 AMDK8 PTLTW 0x06040000 PTL_ 0x000f4240) @
0x000000001ff79e35
ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x000000001ff79eb9
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @
0x000000001ff79fb0
ACPI: DSDT (v001 VIA PTL_ACPI 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
On node 0 totalpages: 127622
DMA zone: 2524 pages, LIFO batch:0
DMA32 zone: 125098 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000d8000
Nosave address range: 00000000000d8000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dffe0000)
Built 1 zonelists. Total pages: 127622
Kernel command line: root=/dev/hda7 resume2=/dev/hda8
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2201.274 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Checking aperture...
CPU 0: aperture @ d0000000 size 256 MB
Memory: 509268k/523712k available (3236k kernel code, 13652k reserved,
1474k data, 200k init)
Calibrating delay using timer specific routine.. 4404.78 BogoMIPS
(lpj=2202393)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: AMD Athlon(tm) 64 Processor 3400+ stepping 0a
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12507242
Detected 12.507 MHz APIC timer.
testing NMI watchdog ... OK.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 4000-407f claimed by vt8235 PM
PCI quirk: region 8100-810f claimed by vt8235 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *10,
disabled.
ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10,
disabled.
ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *11, disabled.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 12 14 15) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: Embedded Controller [EC] (gpe 11) interrupt mode.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
agpgart: Detected AGP bridge 0
agpgart: AGP aperture is 256M @ 0xd0000000
PCI-DMA: Disabling IOMMU.
pnp: 00:06: ioport range 0x600-0x60f has been reserved
pnp: 00:06: ioport range 0x1c0-0x1cf has been reserved
pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:06: ioport range 0xfe10-0xfe11 could not be reserved
PCI: Failed to allocate mem resource #6:[EMAIL PROTECTED] for 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: c1000000-c1ffffff
PREFETCH window: e0000000-efffffff
PCI: Bus 2, cardbus bridge: 0000:00:0b.0
IO window: 00002000-000020ff
IO window: 00002400-000024ff
PREFETCH window: 30000000-31ffffff
MEM window: 32000000-33ffffff
PCI: Bus 6, cardbus bridge: 0000:00:0b.1
IO window: 00002800-000028ff
IO window: 00002c00-00002cff
PREFETCH window: 34000000-35ffffff
MEM window: 36000000-37ffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Enabling device 0000:00:0b.1 (0000 -> 0003)
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:0b.1[B] -> GSI 18 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:0b.1 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1164755295.151:1): initialized
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Linux agpgart interface v0.101 (c) Dave Jones
Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin
is 60 seconds).
Hangcheck: Using monotonic_clock().
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
ACPI: Thermal Zone [THRS] (49 C)
ACPI: Thermal Zone [THRC] (60 C)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: Unable to derive IRQ for device 0000:00:11.1
ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0x1c80-0x1c87, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1c88-0x1c8f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
input: AT Translated Set 2 keyboard as /class/input/input0
hda: IC25N060ATMR04-0, ATA DISK drive
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps:
0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /class/input/input1
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TSSTcorpCD/DVDW TS-L532A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63,
UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 2.00 loaded.
Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22
13:55:50 2006 UTC).
ALSA device list:
No soundcards found.
Netfilter messages via NETLINK v0.30.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
ACPI: (supports S0 S3 S4 S5)
Replacing swsusp.
Suspend2 2.2.8: Swapwriter: Signature found.
Suspend2 2.2.8: Resuming enabled.
Suspend2 2.2.8: Normal swapspace found.
Suspend2 2.2.8: No image found.
Suspend2 2.2.8: Read image returned -61.
ReiserFS: hda7: found reiserfs format "3.6" with standard journal
ReiserFS: hda7: using ordered data mode
ReiserFS: hda7: journal params: device hda7, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda7: checking transaction log (hda7)
ReiserFS: hda7: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 200k freed
input: PC Speaker as /class/input/input2
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 22 (level, low) -> IRQ 185
eth0: Identified chip type is 'RTL8169s/8110s'.
eth0: RTL8169 at 0xffffc20000044400, 00:0a:e4:5e:e2:97, IRQ 185
ieee1394: Initialized config rom entry `ip1394'
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:0b.2[C] -> GSI 19 (level, low) -> IRQ 193
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[193]
MMIO=[c0005800-c0005fff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000ae40444104257]
Yenta: CardBus bridge found at 0000:00:0b.0 [1025:006e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0b.0, mfunc 0x010a1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0cf8, PCI irq 169
Socket status: 30000006
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
Yenta: CardBus bridge found at 0000:00:0b.1 [1025:006e]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:0b.1, mfunc 0x010a1b22, devctl 0x64
Yenta: ISA IRQ mask 0x0c78, PCI irq 177
Socket status: 30000006
ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 185
PCI: VIA IRQ fixup for 0000:00:11.6, from 11 to 9
PCI: Setting latency timer of device 0000:00:11.6 to 64
eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
PCI: VIA IRQ fixup for 0000:00:11.5, from 11 to 9
PCI: Setting latency timer of device 0000:00:11.5 to 64
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 23
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
GSI 20 sharing vector 0xC9 and IRQ 20
ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 201
PCI: VIA IRQ fixup for 0000:00:10.3, from 0 to 9
ehci_hcd 0000:00:10.3: EHCI Host Controller
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.3: irq 201, io mem 0xc0006800
ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 201
PCI: VIA IRQ fixup for 0000:00:10.0, from 0 to 9
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 201, io base 0x00001c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 201
PCI: VIA IRQ fixup for 0000:00:10.1, from 0 to 9
uhci_hcd 0000:00:10.1: UHCI Host Controller
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.1: irq 201, io base 0x00001c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 201
PCI: VIA IRQ fixup for 0000:00:10.2, from 0 to 9
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.2: irq 201, io base 0x00001c60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: device descriptor read/64, error -71
usb 3-2: device descriptor read/64, error -71
usb 3-2: new full speed USB device using uhci_hcd and address 3
usb 3-2: device descriptor read/64, error -71
usb 3-2: device descriptor read/64, error -71
usb 3-2: new full speed USB device using uhci_hcd and address 4
usb 3-2: device not accepting address 4, error -71
usb 3-2: new full speed USB device using uhci_hcd and address 5
usb 3-2: device not accepting address 5, error -71
nvidia: module license 'NVIDIA' taints kernel.
GSI 21 sharing vector 0xD1 and IRQ 21
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 1.0-9742 Tue Nov 7
09:45:02 PST 2006
ReiserFS: hda7: Removing [4570886 21695916 0x0 SD]..done
ReiserFS: hda7: Removing [4570886 14578627 0x0 SD]..done
ReiserFS: hda7: There were 2 uncompleted unlinks/truncates. Completed
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3400+ processors
(version 2.00.00)
powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x12
powernow-k8: ph2 null fid transition 0xe
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
[EMAIL PROTECTED]
FAT: utf8 is not a recommended IO charset for FAT filesystems,
filesystem will be case sensitive!
Adding 1261060k swap on /dev/hda8. Priority:-1 extents:1
across:1261060k
Real Time Clock Driver v1.12ac
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver
(PCI)
pcmcia: Detected deprecated PCMCIA ioctl usage from process: cardmgr.
pcmcia: This interface will soon be removed from the kernel; please
expect breakage unless you upgrade to new tools.
pcmcia: see
http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
details.
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ndiswrapper version 1.28 loaded (preempt=no,smp=no)
ndiswrapper (link_pe_images:577): fixing KI_USER_SHARED_DATA address in
the driver
ndiswrapper: driver neti2220x64 (,11/04/2004,3.03.11.2004) loaded
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 201
ndiswrapper: using IRQ 201
wlan0: vendor: 'INPROCOMM IPN2220 Wireless LAN Adapter'
wlan0: ethernet device 00:0e:9b:6a:89:2a using NDIS driver neti2220x64,
17FE:2220.5.conf
wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK;
AES/CCMP with WPA, WPA2, WPA2PSK
usbcore: registered new driver ndiswrapper
ndiswrapper (iw_set_ap_address:651): setting AP mac address failed
(C0010015)
wlan0: no IPv6 routers present
NVRM: not using NVAGP, an AGPGART backend is loaded!
Losing some ticks... checking if CPU frequency changed.
Bridge firewalling registered
ndiswrapper (iw_set_ap_address:651): setting AP mac address failed
(C0010015)
ndiswrapper (iw_set_ap_address:651): setting AP mac address failed
(C0010015)
r8169: eth0: link up
usb 3-2: new full speed USB device using uhci_hcd and address 6
usb 3-2: configuration #1 chosen from 1 choice
usb 3-2: can't set config #1, error -71
r8169: eth0: link down
r8169: eth0: link up
usb 3-2: USB disconnect, address 6
r8169: eth0: link down
r8169: eth0: link up
usb 2-1: new full speed USB device using uhci_hcd and address 2
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 3
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 4
usb 2-1: device not accepting address 4, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 5
usb 2-1: device not accepting address 5, error -71
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Linux-usb-users@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
