Hi folks,
I'm trying to set up usb devices on 2.6.21.5 but for some
reason /proc/scsi is missing.
I've enabled -scsi device support, -legacy /proc/scsi support,
-scsi disk support, and scsi generic support in the kernel.
There is no scsi controller in hw but scsi is needed for usb.
I need to be able to identify the scsi devices in order to
mount the usb device. Normally this would be found in
/proc/scsi/scsi
The kernel does set up /proc/bus/usb and discovers the
two usb ports/controllers on the mainboard. But not the
usb device.
There's not a single scsi entry in dmesg.
All hints, clues and suggestions appreciated.
b.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
