What HCD driver are you using? Also, please send the dump from
/proc/bus/usb/devices and a copy of the system logs which show the USB
Mass Storage debugging output.
Matt Dharm
On Tue, 28 Mar 2000, Hausheer, Geoffrey wrote:
> Using 2.3.99-pre3, I am still having similar problems to what I had seen in
> 2.3.99-pre1..
> I am trying to install a USB CDRW (Sony Spressa X2)
>
> When I run 'modprobe usb-storage' it usually works, but occasionally (20% ?)
> I get:
>
> scsi0: usb scsi0
> scsi: 1 host.
> usb_control/bulk.msg: timeout
> ^- i usually get about 8 of these
> (a Ctrl-C will not terminate this 15 second process)
>
> if I cat /proc/scsi/scsi i get:
> Attached devices: none
>
> cat /proc/bus/usb/devices looks normal (The drive shows up)
>
> I have noted that I can reproduce this error pretty reliably by doing a
> 'modprobe -r usb-storage' then 'modprobe usb-storage' (whether or not the
> drive was successfully detected the first time)
>
> As a secondary issue:
>
> If I unplug the USB drive during the time 'usb_control/bulk.msg: timeout' is
> being displayed, then unload the usb-storage and scsi modules, then re
> modprobe it, I get no messages at all. It just sits there. A ctrl-C will
> kill this process, but after this point the only way to get the drive
> working is to reboot. I know that the spolution is 'Don't do that!' But I
> thought I'd mention it.
>
> Any ideas on how to fix this?
> .Geoff
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
--
Matthew Dharm Home: [EMAIL PROTECTED]
Engineer, Qualcomm, Inc. Work: [EMAIL PROTECTED]
I say, what are all those naked people doing?
-- Big client to Stef
User Friendly, 12/14/1997
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
