I went ahead and built a pre4-5 kernel to see if usb-storage patches
have made any progress against this digi-cam.
Things do look better, but I am still having trouble interpreting the
results.
This line from the log looks interesting -- there is no /dev/sg1, do I
need to create it? If so, how?
Apr 8 11:54:56 aurora kernel: Detected scsi generic sg1 at scsi1,
channel 0, id 0, lun 0, type 6
Below is 'cat /proc/scsi/scsi' output. Based on that info, I would
expect the camera to be on /dev/sdb (or sdb1?), but alas nothing to
mount there ('not a valid block device').
Any ideas are appreciated.
Thanks!
rjf&
=-=-=-=-=-
Attached devices:
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: iomega Model: jaz 2GB Rev: E.17
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: ( ( Model: I ( Rev: I
Type: Scanner ANSI SCSI revision: ffffffff
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
