Hi,
Kernel plain 2.3.99pre3,
OV511 based Webcam "VGA USB Camera Version98",
OHCI HC driver loaded.
when I connect this webcam, this is the syslog output:
Apr 9 00:14:25 linux1 kernel: hub.c: port 2 connection change
Apr 9 00:14:25 linux1 kernel: hub.c: portstatus 301, change 1, Low Speed
Apr 9 00:14:26 linux1 kernel: hub.c: portstatus 301, change 12, Low Speed
Apr 9 00:14:27 linux1 last message repeated 4 times
Apr 9 00:14:27 linux1 kernel: hub.c: Cannot enable port 2 after 5 retries,
disabling port.
Apr 9 00:14:27 linux1 kernel: hub.c: Maybe the USB cable is bad?
Apr 9 00:14:28 linux1 kernel: hub.c: port 2 enable change
Apr 9 00:14:28 linux1 kernel: hub.c: port 2 reset change
when i load the OHCI HCdriver after connecting the WebCam, the WebCam is
regognized:
Apr 9 02:43:29 linux1 kernel: hub.c: port 2 connection change
Apr 9 02:43:29 linux1 kernel: hub.c: portstatus 101, change 1, High Speed
Apr 9 02:43:29 linux1 kernel: hub.c: portstatus 103, change 10, High Speed
Apr 9 02:43:29 linux1 kernel: usb.c: USB new device connect, assigned
device number 2
Apr 9 02:43:29 linux1 kernel: usb.c: kmalloc IF c4dd54c0, numif 1
Apr 9 02:43:29 linux1 kernel: usb.c: new device strings: Mfr=0, Product=0,
SerialNumber=0
Apr 9 02:43:29 linux1 kernel: ov511: probing for device...
Apr 9 02:43:29 linux1 kernel: ov511: USB OV511-based camera found
Apr 9 02:43:29 linux1 kernel: ov511: Camera is a AverMedia InterCam Elite
Apr 9 02:43:29 linux1 kernel: ov511: Reset: type=0x3F
Apr 9 02:43:29 linux1 kernel: ov511: ov511_mode_init_regs(ov511, w:640,
h:480, mode:4, sub:0)
Apr 9 02:43:30 linux1 kernel: usb.c: ov511 driver claimed interface c4dd54c0
other devices recognized correctly when the OHCI HCD is loaded and then
plugged in, only this webcam makes trouble.
--
und servus <o)
Hans Klein /\\
_\_v
/* http://www.net-con.net */
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
