I picked up one of these neat little devices last week to see what it
would
do in connecting some of my scsi devices to my laptop. It looks like
usb-storage makes an attempt at talking to this device. Is this the
driver
that would be correct or is a whole new one needed? Some dump data
follows:

            Blisster
Apr  8 13:07:22 tiny kernel: ov511: probing for device...
Apr  8 13:07:23 tiny kernel: scsi : 1 host.
Apr  8 13:07:23 tiny kernel: scsi : 0 hosts.
Apr  8 13:08:20 tiny kernel: usb.c: USB new device connect, assigned device number 5
Apr  8 13:08:20 tiny kernel: Manufacturer: Shuttle Technology Inc.
Apr  8 13:08:20 tiny kernel: Product: eUSCSI Bridge Ver 1.11
Apr  8 13:08:20 tiny kernel: SerialNumber: 07
Apr  8 13:08:20 tiny kernel: ov511: probing for device...
Apr  8 13:08:20 tiny kernel: usb.c: This device is not recognized by any installed USB 
driver.
Apr  8 13:08:20 tiny kernel:   Length              = 18
Apr  8 13:08:20 tiny kernel:   DescriptorType      = 01
Apr  8 13:08:20 tiny kernel:   USB version         = 1.00
Apr  8 13:08:20 tiny kernel:   Vendor:Product      = 04e6:0002
Apr  8 13:08:20 tiny kernel:   MaxPacketSize0      = 64
Apr  8 13:08:20 tiny kernel:   NumConfigurations   = 1
Apr  8 13:08:20 tiny kernel:   Device version      = 1.00
Apr  8 13:08:20 tiny kernel:   Device Class:SubClass:Protocol = 00:00:00
Apr  8 13:08:20 tiny kernel:     Per-interface classes
Apr  8 13:08:20 tiny kernel: Configuration:
Apr  8 13:08:20 tiny kernel:   bLength             =    9
Apr  8 13:08:20 tiny kernel:   bDescriptorType     =   02
Apr  8 13:08:20 tiny kernel:   wTotalLength        = 0020
Apr  8 13:08:20 tiny kernel:   bNumInterfaces      =   01
Apr  8 13:08:20 tiny kernel:   bConfigurationValue =   01
Apr  8 13:08:20 tiny kernel:   iConfiguration      =   03
Apr  8 13:08:20 tiny kernel:   bmAttributes        =   40
Apr  8 13:08:20 tiny kernel:   MaxPower            =    0mA
Apr  8 13:08:20 tiny kernel:
Apr  8 13:08:20 tiny kernel:   Interface: 0
Apr  8 13:08:20 tiny kernel:   Alternate Setting:  0
Apr  8 13:08:20 tiny kernel:     bLength             =    9
Apr  8 13:08:20 tiny kernel:     bDescriptorType     =   04
Apr  8 13:08:20 tiny kernel:     bInterfaceNumber    =   00
Apr  8 13:08:20 tiny kernel:     bAlternateSetting   =   00
Apr  8 13:08:20 tiny kernel:     bNumEndpoints       =   02
Apr  8 13:08:20 tiny kernel:     bInterface Class:SubClass:Protocol =   08:06:50
Apr  8 13:08:20 tiny kernel:     iInterface          =   04
Apr  8 13:08:20 tiny kernel:     Endpoint:
Apr  8 13:08:20 tiny kernel:       bLength             =    7
Apr  8 13:08:20 tiny kernel:       bDescriptorType     =   05
Apr  8 13:08:20 tiny kernel:       bEndpointAddress    =   01 (out)
Apr  8 13:08:20 tiny kernel:       bmAttributes        =   02 (Bulk)
Apr  8 13:08:20 tiny kernel:       wMaxPacketSize      = 0040
Apr  8 13:08:20 tiny kernel:       bInterval           =   00
Apr  8 13:08:20 tiny kernel:     Endpoint:
Apr  8 13:08:20 tiny kernel:       bLength             =    7
Apr  8 13:08:20 tiny kernel:       bDescriptorType     =   05
Apr  8 13:08:20 tiny kernel:       bEndpointAddress    =   82 (in)
Apr  8 13:08:20 tiny kernel:       bmAttributes        =   02 (Bulk)
Apr  8 13:08:20 tiny kernel:       wMaxPacketSize      = 0040
Apr  8 13:08:20 tiny kernel:       bInterval           =   00

--- I insmod usb-storage at this point

Apr  8 13:13:55 tiny kernel: usb.c: registered new driver usb-storage
Apr  8 13:13:55 tiny kernel: scsi0 : SCSI emulation for USB Mass Storage devices
Apr  8 13:13:55 tiny kernel:
Apr  8 13:13:55 tiny kernel: scsi : 1 host.
Apr  8 13:13:55 tiny kernel:   Vendor: Y-E DATA  Model: USB-FDU           Rev: 3.04
Apr  8 13:13:55 tiny kernel:   Type:   Direct-Access                      ANSI SCSI 
revision: 02
Apr  8 13:13:55 tiny kernel: Detected scsi removable disk sda at scsi0, channel 0, id 
0, lun 0
Apr  8 13:13:56 tiny kernel: SCSI device sda: hdwr sector= 512 bytes. Sectors= 2880 [1 
MB] [0.0 GB]
Apr  8 13:13:56 tiny kernel: sda: Write Protect is off
Apr  8 13:13:56 tiny kernel:  sda:<7>usb-storage: us_queuecommand() called
Apr  8 13:13:57 tiny kernel:  sda1 sda2 sda3
Apr  8 13:13:57 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1730
Apr  8 13:13:57 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1732
Apr  8 13:13:57 tiny kernel: scsi1 : SCSI emulation for USB Mass Storage devices
Apr  8 13:13:57 tiny kernel:
Apr  8 13:13:57 tiny kernel: scsi : 2 hosts.
Apr  8 13:13:57 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 2039
Apr  8 13:14:02 tiny kernel: usb_control/bulk_msg: timeout
Apr  8 13:14:03 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1654
Apr  8 13:14:08 tiny kernel: usb_control/bulk_msg: timeout
Apr  8 13:14:08 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 1271
Apr  8 13:14:14 tiny kernel: usb_control/bulk_msg: timeout
Apr  8 13:14:14 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 888
Apr  8 13:14:20 tiny kernel: usb_control/bulk_msg: timeout
Apr  8 13:14:20 tiny kernel: usb-uhci.c: interrupt, status 3, frame# 505
Apr  8 13:14:25 tiny kernel: usb_control/bulk_msg: timeout
Apr  8 13:14:25 tiny kernel: USB Mass Storage support registered.

 -- /proc/bus/usb/devices data

T:  Bus=01 Lev=02 Prnt=02 Port=02 Cnt=03 Dev#=  5 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04e6 ProdID=0002 Rev= 1.00
S:  Manufacturer=Shuttle Technology Inc.
S:  Product=eUSCSI Bridge Ver 1.11 
S:  SerialNumber=07
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms


---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]

Reply via email to