Hi
I've just upgraded from 2.3.99-pre4-5 to 2.3.99-pre6-1 and now the USB
interupt is not being found.
I'm using RedHat 6.1 on a PII-266 Inspiron 3200.
I had this once before, but I can't remember how it was fixed. There is no
BIOS setting for USB available on this machine. It appears to be always on.
Can anyone help me please?
Display at startup includes:
PCI: Enabling device 00:07.2 (0000 -> 0001)
PCI: No IRQ known for interrupt pin D of device 00:07.2.
usb-uhci.c: Found UHCI device with no IRQ assigned. Check BIOS settings!
/lib/modules/2.3.99-pre6/usb/usb-uhci.o: init_module: Device or resource busy
mice: PS/2 mouse device common for all mice
Part of /etc/fstab:
none /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
none /proc/bus/usb usbdevfs defaults 0 0
shmfs /var/shm shm defaults 0 0
cat /proc/bus/usb/devices gives:
nothing
dmesg gives:
Adding cardbus controller 0: Texas Instruments PCI1131
PCI: Enabling device 00:04.0 (0000 -> 0002)
PCI: No IRQ known for interrupt pin A of device 00:04.0.
Yenta IRQ list 0c98, PCI irq0
Socket status: 30000059
Adding cardbus controller 1: Texas Instruments PCI1131 (#2)
PCI: Enabling device 00:04.1 (0000 -> 0002)
PCI: No IRQ known for interrupt pin B of device 00:04.1.
Yenta IRQ list 0c98, PCI irq0
Socket status: 30000019
Intel PCIC probe: not found.
IP-Config: No network devices available.
kmem_create: Forcing size word alignment - nfs_fh
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 168k freed
Adding Swap: 68000k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
cs: IO port probe 0x1000-0x17ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x220-0x22f
0x300-0x307 0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 Compatible: io 0x320, irq 3, hw_addr 00:80:C8:8A:8E:5C
ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
YM3812 and OPL-3 driver Copyright (C) by Hannu Savolainen, Rob Hooft 1993-1996
usb-uhci.c: $Revision: 1.228 $ time 08:59:21 Apr 13 2000
usb-uhci.c: High bandwidth mode enabled
PCI: Enabling device 00:07.2 (0000 -> 0001)
PCI: No IRQ known for interrupt pin D of device 00:07.2.
usb-uhci.c: Found UHCI device with no IRQ assigned. Check BIOS settings!
Linux video capture interface: v1.00
usb.c: registered new driver usblp
mice: PS/2 mouse device common for all mice
usb.c: registered new driver serial
usbserial.c: support registered
V4L-Driver for Vision CPiA based cameras v0.7.4
usb.c: registered new driver cpia
usb.c: registered new driver ov511
ov511.c: ov511 driver registered
usb.c: registered new driver wacom
==================================================================
You're only jealous because the little penguins are talking to me.
==================================================================
Bill Maidment
Elgas Ltd
Milsons Point
email: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
