Brad, There's a rev. 0.1 interop-snapshot.tar.gz now at http://sourceforge.net/project/?group_id=4336. ~Randy ___________________________________________________ |Randy Dunlap Intel Corp., DAL Sr. SW Engr.| |randy.dunlap.at.intel.com 503-696-2055| |NOTE: Any views presented here are mine alone | |and may not represent the views of my employer. | |_________________________________________________| > -----Original Message----- > From: Dunlap, Randy [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, April 25, 2000 3:42 PM > To: 'Brad Hards' > Cc: [Linux-Usb] > Subject: RE: [linux-usb] RE: Maximum depth [was: more than 7 > ports on a > hu b?] > > > Brad, > > My experience with the mailing list archiver for > sourceforge.net is that it takes about one week > for it to come alive. After that it works. > > I don't need to see your work in progress. > I can wait until you have the full draft done. > > Thanks, > Randy > > > -----Original Message----- > > From: Brad Hards [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, April 26, 2000 2:08 AM > > To: Dunlap, Randy > > Cc: [Linux-Usb] > > Subject: Re: [linux-usb] RE: Maximum depth [was: more than 7 > > ports on a > > hub?] > > > > > > "Dunlap, Randy" wrote: > > > So are you looking at what USB-IF calls compliance tests or > > > interoperability tests? Or both? > > > When will you be ready for a test spec review? > > > What we need most for USB-IF PlugFest in August is > > > interoperability tests...that should have priority IMO. > > Both. > > I call out the compliancy tests (to be done under Win98, or > > with any OS, > > depending on which test it is) by reference. > > Then I have detailed procedures for non-hub device testing. The hub > > testing isn't done yet. > > > > I have sent Greg the draft, and he said he would put it up. For some > > reason the mailing list archiver isn't functional. I can send > > you a copy if you want (118K). > > I should have the full draft done by the weekend. > > > > Brad > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
