Hi Randy: Thanks for taking the time to help! On Tue, 09 May 2000, you wrote: > Hi, > > > > -----Original Message----- > > From: Ron Gage [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, May 09, 2000 8:38 AM > > To: [EMAIL PROTECTED] > > Subject: [linux-usb-devel] USB Usage problems > > > > Hi folks: > > > > I have been trying to get USB to work on a Netpliance > > I-opener. It has not been going very well... > > > > I am using the 2.2.15 backport and have the VIA chip > > configured. During > > Do you mean usb-2.3.99-pre7-1-for-2.2.14.diff.gz ? Probably! I didn't remember if I had put .14 or .15 on it. > > > bootup, it ID's the USB stuff just fine, but when I plug in > > my Ethernet Module > > (Linksys 10/100 Ethernet Adaptor), it says something about > > "no interface > > available" or something to that effect. > > We need to see your .config file and kernel log messages. > And 'cat /proc/bus/usb/devices' after attaching the ethernet > device if it (/proc/bus/usb/devices) is not empty. I can tell you that /proc/bus/usb is empty when the Linksys is empty. As for extracting out the exact messages, I'll have to dial-up with that machine and send them seperately. It'll be a few minutes before I can get that set-up. -- Ron Gage - Saginaw, MI ([EMAIL PROTECTED]) --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
