Thanks for the speedy reply...
Thats what I call service.
Have attached requested, in the next message I sent.
Forgot to attach it.
Did Not enable APIC and IO-APIC support on uniprocessors' option.
Not SMP Kernel.
Searched previous archives and tried various things such as the pci=biosirq
param to the kernel.
Tried Martins patch for pci_irq.h (albiet manually, diff won't work for me!).
Many thanks,... All this for a USB keyboard to make my laptop usable !!!!!!
On Sun, 14 May 2000, you wrote:
> Hi Alan,
>
> Here's what Martin Mares asks for in debug info:
>
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> If you're still experiencing USB IRQ problems with 2.3.99-pre7 (which should
> contain a new version of my PCI IRQ routing code), please let me know and
> send me the following information:
>
> (1) Bootup messages printed if you change `#undef DEBUG' to `#define
> DEBUG'
> in arch/i386/kernel/pci-i386.h.
>
> (2) Output of `lspci -vvx'.
>
> (3) Whether you use a SMP kernel or not.
>
> Also, it's a good idea to ensure that you didn't enable the `APIC and
> IO-APIC support on uniprocessors' option.
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>
> ~Randy
> ___________________________________________________
> |Randy Dunlap Intel Corp., DAL Sr. SW Engr.|
> |randy.dunlap.at.intel.com 503-696-2055|
> |NOTE: Any views presented here are mine alone |
> |and may not represent the views of my employer. |
> |_________________________________________________|
>
> > -----Original Message-----
> > From: Alan Pearson [mailto:[EMAIL PROTECTED]]
> > Sent: Sunday, May 14, 2000 12:39 PM
> > To: [EMAIL PROTECTED]
> > Subject: [linux-usb] 2.3.99Pre7 IRQ problems Again !
> >
> >
> > Hi,
> > Relative newby to linux USB.
> > Have been trying for 2 weeks to get it too work on an ultra laptop.
> >
> > Problem seems to be that the IRQ is not being assigned.
> > No config in bios or PnP or USB (SystemSoft bios)
> >
> > Switching on PCI debug reveals that it keeps trying to get
> > IRQ 5, which is the
> > soundcard.
> > Normally it uses 9 (windows)
> >
> > Have attached the output of dmesg, and lspci -vvx and the
> > lilo.conf which I
> > boot this kernel with.
> >
> > Please help !!
> >
> > Thanks in advance....
> > --
> >
> > Alanp
--
Alanp
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
