Hi,
End of last week I got a message to our rio devel list with a similar
error. First I'd heard of it. This was with p8 but it would seem
that the issue is beyond just storage.
Keith Clayton
[EMAIL PROTECTED]
Here's what I'd received, don't know if it'll help but . . .
When I plug in my Rio, I get the follow messages in dmesg:
uhci.c: root-hub INT complete: port1: 580 port2: 493 data: 4
hub.c: port 2 connection change
hub.c: portstatus 101, change 1, High Speed
hub.c: portstatus 103, change 0, High Speed
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF ca755d00, numif 1
uhci.c: uhci_result_control() failed with status 440000
URB [ca77b840] urbp [c9cf5000]
QH [cb8f6000]
td 0: [ca56c140]
0a56c040 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=2,
PID=2d(SETUP) (buf=0a755e00)
td 1: [ca56c040]
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=2,
PID=69(IN)
(buf=00000000)
usb.c: failed to set default configuration
usb.c: USB disconnect on device 2
I doubt it's a problem with the Rio; I was able to load it up with songs
using
Win98. Perhaps it's a USB problem, rather than a problem with the Rio 500
driver?
I'm using 2.3.99-pre8, with the alternate driver (uhci.o) and rio500.o
from the
kernel sources. If I try uhci-usb.o, my machine locks up when I plug in
the
Rio.
The motherboard is an Asus K7M; here's the USB output from lspci -v:
00:04.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06)
(prog-if
0
0 [UHCI])
Subsystem: Unknown device 0925:1234
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at c800 [size=32]
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06)
(prog-if
0 [UHCI])
Subsystem: Unknown device 0925:1234
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at c800 [size=32]
00:04.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 06)
(prog-if
0
0 [UHCI])
Subsystem: Unknown device 0925:1234
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at cc00 [size=32]
On Mon, 29 May 2000, Pavel Machek wrote:
> Hi!
>
> I tried to interrupt running cp and got this:
>
> May 29 15:54:06 bug kernel: usb-storage.c: -- transport indicates
> transport failure
> May 29 15:54:06 bug kernel: usb-storage.c: scsi cmd done,
> result=0x70000
> May 29 15:54:06 bug kernel: usb-storage.c: *** thread sleeping.
> May 29 15:54:06 bug kernel: usb-storage.c: us_queuecommand() called
> May 29 15:54:06 bug kernel: usb-storage.c: *** thread awakened.
> May 29 15:54:06 bug kernel: usb-storage.c: Command READ_10 (10 bytes)
> May 29 15:54:06 bug kernel: usb-storage.c: 28 00 00 01 30 a9 00 00
> 78 00
> May 29 15:54:06 bug kernel: usb-storage.c: Bulk command S 0x43425355 T
> 0x703 LUN 0 L 61440 F 128 CL 10
> May 29 15:54:13 bug apmd[66]: Charge: -0.555556 0:18 2:42 (10% 0:13)
> May 29 15:54:16 bug kernel: usb-storage.c: usb_stor_bulk_msg() timeout
> May 29 15:54:16 bug kernel: usb-storage.c: Bulk command transfer
> result=-110
> May 29 15:54:16 bug kernel: usb-storage.c: Attempting to get CSW...
> May 29 15:54:16 bug kernel: usb-storage.c: clearing endpoint halt for
> pipe 0xc0010380
> May 29 15:54:16 bug kernel: uhci.c: uhci_result_control() failed with
> status 440000
> May 29 15:54:16 bug kernel: URB [c3a3bbd0] urbp [c11eb044]
> May 29 15:54:16 bug kernel: QH [c0720030]
> May 29 15:54:16 bug kernel: td 0: [c11ea9a0]
> May 29 15:54:16 bug kernel: 011ea0a0 e0 Stalled CRC/Timeo
> Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=034ee380)
> May 29 15:54:16 bug kernel: td 1: [c11ea0a0]
> May 29 15:54:16 bug kernel: 00000001 e3 IOC Active Length=0
> MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)
> May 29 15:54:16 bug kernel: usb-storage.c: Attempting to get CSW (2nd
> try)...
> May 29 15:54:16 bug kernel: usb-storage.c: clearing halt for pipe
> 0xc0010380
> May 29 15:54:16 bug kernel: uhci.c: uhci_result_control() failed with
> status 440000
> May 29 15:54:16 bug kernel: URB [c3a3be10] urbp [c11eb044]
> May 29 15:54:16 bug kernel: QH [c0720000]
> May 29 15:54:16 bug kernel: td 0: [c11ea0a0]
> May 29 15:54:16 bug kernel: 011ea9a0 e0 Stalled CRC/Timeo
> Length=7 MaxLen=7 DT0 EndPt=0 Dev=3, PID=2d(SETUP) (buf=034ee380)
> May 29 15:54:16 bug kernel: td 1: [c11ea9a0]
> May 29 15:54:16 bug kernel: 00000001 e3 IOC Active Length=0
> MaxLen=7ff DT1 EndPt=0 Dev=3, PID=69(IN) (buf=00000000)
> May 29 15:54:16 bug kernel: usb-storage.c: -- transport indicates
> transport failure
> May 29 15:54:16 bug kernel: usb-storage.c: scsi cmd done,
> result=0x70000
> May 29 15:54:16 bug kernel: usb-storage.c: *** thread sleeping.
> May 29 15:54:16 bug kernel: usb-storage.c: us_queuecommand() called
> May 29 15:54:16 bug kernel: usb-storage.c: *** thread awakened.
> May 29 15:54:16 bug kernel: usb-storage.c: Command READ_10 (10 bytes)
> May 29 15:54:16 bug kernel: usb-storage.c: 28 00 00 01 30 a9 00 00
> 78 00
> May 29 15:54:16 bug kernel: usb-storage.c: Bulk command S 0x43425355 T
> 0x704 LUN 0 L 61440 F 128 CL 10
>
> --
> I'm [EMAIL PROTECTED] "In my country we have almost anarchy and I don't care."
> Panos Katsaloulis describing me w.r.t. patents me at [EMAIL PROTECTED]
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
