Hello,
since 2.3.40 my ML 56k USB does not work (uhci and uhci-je static). The ac-Kernels
additionally
do not even detect the device (dmesg).
My other problem is that I have to share the USB-IRQ on my K7V at
least with my Tulip-Card (CNET). The tulip-module is loaded, but if it
gets some packets, the hub gets some traffic, but theres no
response to the card.
On W98 + Be this combination works.
Thanks,
Werner Hager
dmesg:
-------
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB UHCI at I/O 0xd400, IRQ 3
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB UHCI at I/O 0xd000, IRQ 3
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
[...]
uhci.c: root-hub INT complete: port1: 5ab port2: 49b data: 6
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
uhci.c: root-hub INT complete: port1: 5ab port2: 49b data: 6
hda: IBM-DPTA-372050, ATA DISK drive
uhci.c: root-hub INT complete: port1: 580 port2: 58a data: 4
uhci.c: root-hub INT complete: port1: 5ab port2: 49b data: 6
uhci.c: root-hub INT complete: port1: 5a9 port2: 49b data: 6
uhci.c: root-hub INT complete: port1: 5a9 port2: 49b data: 6
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
usb.c: USB new device connect, assigned device number 2
usb.c: This device is not recognized by any installed USB driver.
hub.c: already running port 1 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 2
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
hdc: ASUS CD-S400, ATAPI CDROM drive
usb.c: USB new device connect, assigned device number 2
usb.c: This device is not recognized by any installed USB driver.
uhci.c: root-hub INT complete: port1: 5a5 port2: 49b data: 4
uhci.c: root-hub INT complete: port1: 5a5 port2: 499 data: 4
uhci.c: root-hub INT complete: port1: 5a5 port2: 49f data: 4
usb.c: USB new device connect, assigned device number 3
usb.c: This device is not recognized by any installed USB driver.
hub.c: already running port 2 disabled by hub (EMI?), re-enabling...
[...]
usb.c: USB new device connect, assigned device number 3
uhci.c: uhci_result_control() failed with status 440000
URB [c7f64a80] urbp [c7f6b000]
QH [c7f69000]
td 0: [c7f6a200]
07f6a240 e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP)
(buf=07f67c40)
td 1: [c7f6a240]
00000001 e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN)
(buf=00000000)
usb.c: USB device not accepting new address (error=-110)
usb.c: USB disconnect on device -1
/proc/bus/usb/devices:
----------------------
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=001e Rev= 1.03
S: Manufacturer=Microsoft
S: Product=Microsoft IntelliMouse� Explorer
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
