On Wed, May 31, 2000, Ken Scott <[EMAIL PROTECTED]> wrote:
> On Wed, 31 May 2000, Johannes Erdfelt wrote:
>
> > This patch is similar to the patch Randy sent out but has some more
> > verbose error messages as well as catches a couple of more areas where
> > it may fail silently.
> >
> > One change of note is removing a magic number which was incorrect.
> > However, this would only cause problems with slightly out of spec hubs
> > AFICT. Perhaps this causes problems with the CTX monitors? It's a long
> > shot but worth a test I guess.
> >
> > The patch is against 2.4.0-test1
>
> I copied and applied the patch to 2.4.0-test1. The only thing I might have
> done wrong is that I did make menuconfig before I applied the patch, but I
> did patch before I did make bzImage. Will that still work OK?
Yeah, that's fine. The patch didn't change any config options.
> I have attached my /proc/bus/usb/drivers and devices as well as the
> portion of /var/log/messages from when I attached the monitor to the root
> hub on the PC. Disregard all the disconnects before that, I was taking
> everything else off of the chain.
>
> After attaching the hub, I plugged in a SanDisk CF reader (the one that
> works, thanks Matt D!), and tried to mount it. That is the /dev/sda1
> error.
>
> What else can I provide to you? I did have the USB debugging enabled, as
> well as the patch applied.
So with this patch, things are working better?
It's hard to tell what's happening here since I don't see a connect message
for the Sandisk, nor do I see it in the 'devices' output.
JE
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
