On Thu, Jun 01, 2000 at 12:56:50PM -0700, John Shifflett wrote:
> Hi Toon.
Hi John.
Thanks a million! You helped me find the problem.
I didn't expect the camera to display the internal memory and the
smartmedia memory card as two different LUN's with the same SCSI-id.
Because I compiled my kernel with the "Scan multple LUN's" option
turned off, it didn't detect the smartmedia card.
I tried the command `echo "scsi add-single-device 2 0 1 0" > /proc/scsi/scsi'
but didn't try `echo "scsi add-single-device 2 0 0 1" > /proc/scsi/scsi'!
That's all. It works now. Very embarassing.
The trace you attached to your reply put me on the right track.
Now all that's left is recompiling the kernel with the "Scan multple
LUN's" option turned on.
Thanks again.
Toon.
(I hope you don't mind that I Cc: this reply to the list to satisfy lurkers.)
--
Toon van der Pas Email: [EMAIL PROTECTED]
Zomervlinderberm 24 Phone: +31 (30) 635 3162 -o)
3994 WP Houten Fax: +31 (30) 634 1662 /\\
The Netherlands _\_v
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
