--------
On Sun, 25 Jun 2000 14:21:00 -0700 "David Brownell" wrote:
> > I applied David's ohci-paranoid patch to 2.4.0-test1-ac11 and trapped
> > a bogus address message 48 hours latter. The was no oops, the system
> > continues to run and USB is still functioning normally.
>
> OK, so you can be a guinea pig for this next patch then ... :-)
>
> Based on some offline traffic with Miles, I concluded that
> at least part of his problem is due to holes in the Cardbus
> support. While I'm addressing those issues (or at least a
> few of them :-), I thought it'd be good to have an initial
> non-experimental patch to at least get rid of that Oops.
>
> So, here's this patch -- some cleanup, removes an Oops for
> you (and Miles), and prepares the ground for a patch that
> makes Cardbus OHCI controllers handle hotplug correctly.
>
> Works on two of my test machines, but I want confirmation
> that I didn't goof something up as I was splitting out this
> relatively safe stuff from the larger patch. After all, I
> never see that Oops ...
>
> Let me know if this works for you. Re Roman's suggestion,
> try that too! I'm not sure whether to hope the register
> flakes out occasionally, as you suggested; it'd explain
> everything, but that'd be a nasty failure mode.
OK - patch applied and running. I've still got Roman's extra check
in place and I'll report what happens.
David
-------------------------------------------------------------------------------
David Nash - [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
