hi i have a epson 760 usb printer that dont work under linux i try all and yet dont
know why. i explain
i modprobe modules .... mod printer | mod usbcore | mod usb-uhci ......i get
Jul 12 13:19:35 jaya kernel: usb.c: registered new driver usbdevfs
Jul 12 13:19:35 jaya kernel: usb.c: registered new driver hub
Jul 12 13:19:35 jaya kernel: usb.c: registered new driver usblp
Jul 12 13:19:50 jaya kernel: usb-uhci.c: $Revision: 1.232 $ time 00:45:07 Jul 12 2000
Jul 12 13:19:50 jaya kernel: usb-uhci.c: High bandwidth mode enabled
Jul 12 13:19:50 jaya kernel: usb-uhci.c: Intel USB controller: setting latency timer
to 0
Jul 12 13:19:50 jaya kernel: usb-uhci.c: USB UHCI at I/O 0xef80, IRQ 19
Jul 12 13:19:50 jaya kernel: usb-uhci.c: Detected 2 ports
Jul 12 13:19:50 jaya kernel: usb.c: new USB bus registered, assigned bus number 1
Jul 12 13:19:50 jaya kernel: usb.c: USB new device connect, assigned device number 1
Jul 12 13:19:50 jaya kernel: usb.c: kmalloc IF c22bb860, numif 1
Jul 12 13:19:50 jaya kernel: usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
Jul 12 13:19:50 jaya kernel: usb.c: USB device number 1 default language ID 0x0
Jul 12 13:19:50 jaya kernel: Product: USB UHCI Root Hub
Jul 12 13:19:50 jaya kernel: SerialNumber: ef80
Jul 12 13:19:50 jaya kernel: hub.c: USB hub found
Jul 12 13:19:50 jaya kernel: hub.c: 2 ports detected
Jul 12 13:19:50 jaya kernel: hub.c: ganged power switching
Jul 12 13:19:50 jaya kernel: hub.c: standalone hub
Jul 12 13:19:50 jaya kernel: hub.c: global over-current protection
Jul 12 13:19:50 jaya kernel: hub.c: power on to power good time: 2ms
Jul 12 13:19:50 jaya kernel: hub.c: hub controller current requirement: 0mA
Jul 12 13:19:50 jaya kernel: hub.c: port 1 is removable
Jul 12 13:19:50 jaya kernel: hub.c: port 2 is removable
Jul 12 13:19:50 jaya kernel: hub.c: local power source is good
Jul 12 13:19:50 jaya kernel: hub.c: no over-current condition exists
Jul 12 13:19:50 jaya kernel: hub.c: enabling power on all ports
Jul 12 13:19:50 jaya kernel: usb.c: hub driver claimed interface c22bb860
Jul 12 13:19:50 jaya kernel: hub.c: port 2 connection change
Jul 12 13:19:50 jaya kernel: hub.c: portstatus 101, change 1, 12 Mb/s
Jul 12 13:19:51 jaya kernel: hub.c: portstatus 103, change 0, 12 Mb/s
Jul 12 13:19:51 jaya kernel: usb.c: USB new device connect, assigned device number 2
Jul 12 13:19:51 jaya kernel: usb.c: kmalloc IF c22bb260, numif 1
Jul 12 13:19:51 jaya kernel: usb.c: new device strings: Mfr=1, Product=2,
SerialNumber=3
Jul 12 13:19:51 jaya kernel: usb.c: USB device number 2 default language ID 0x409
Jul 12 13:19:51 jaya kernel: Manufacturer: EPSON
Jul 12 13:19:51 jaya kernel: Product: USB Printer
Jul 12 13:19:51 jaya kernel: SerialNumber: 010020004271048190
Jul 12 13:19:51 jaya kernel: printer.c: usblp0: USB Bidirectional printer dev 2 if 0
alt 0
Jul 12 13:19:51 jaya kernel: usb.c: usblp driver claimed interface c22bb260
Perfectly or not? ....
i do mkdir /dev/usb | mknod /dev/usb/lp0 c 180 0 ..... and create the dispositive ...
mount /proc/bus/usb /proc/bus/usb -t usbdevfs and in it i get ..
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=0005 Rev= 1.00
S: Manufacturer=EPSON
S: Product=USB Printer
S: SerialNumber=010020004271048190
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
So the printer is there and right
in /etc/printcap i have
##PRINTTOOL3## LOCAL uniprint NAxNA a4 {} U_EpsonStylusColor stc800ih 1
lp:\
:sd=/var/spool/lpd/lp:\
:mx#0:\
:sh:\
:lp=/dev/usb/lp0:\
:if=/var/spool/lpd/lp/filter:\
And i try cat luis > /dev/usb/lp0 and do nothing and no error messages
try lpr luis and same ....
Can someone tell me something .....any idea ,,, please email me to
[EMAIL PROTECTED] im not subscribed to list ...--->>> yet .
Luis Toro Teijeiro
A�O 3021 de la era del pinguino :-) tux rules.
ICQ : 42466380
pasate por http://www.gulic.org y veras Canarias y los linuxeros
http://jaya.dyndns.org ------pagina personal
Firma gnupg disponible en http://jaya.dyndns.org/linuxx/gnupg/
GnupgFingerprint: 8F06 3E9A F610 89BF 0B09 3DEB 0C7E 9AE1 6CE0 B251
Alguna duda ???? irc canal linux o gulic soy linuxx pa servirte .
PGP signature
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
