Did you:
(a) Compile in SCSI disk support? Or manually load sd.o? Recent changes
in the SCSI layer have broken auto-loading of this module.
(b) Tried accessing /dev/sda1?
Matt
On Wed, Jul 26, 2000 at 05:53:29PM +0200, Alexander Hackenberg wrote:
> hi,
>
> can somebody tell me what i'm doing wrong here?
>
> i configured my kernel for SCSI support and it
> seems as if there could no device found for my
> camera (or something like that - i'm no real expert
> with SCSI)
>
> i'm running linux 2.4.0-test4 on an IBM 600x notebook.
>
> TIA
>
> alex
>
> ps: log attached ...
> Jul 26 17:39:49 ahh kernel: usb-uhci.c: $Revision: 1.232 $ time 17:21:09 Jul 26 2000
> Jul 26 17:39:49 ahh kernel: usb-uhci.c: High bandwidth mode enabled
> Jul 26 17:39:49 ahh kernel: usb-uhci.c: Intel USB controller: setting latency timer
>to 0
> Jul 26 17:39:49 ahh kernel: usb-uhci.c: USB UHCI at I/O 0x4000, IRQ 11
> Jul 26 17:39:49 ahh kernel: usb-uhci.c: Detected 2 ports
> Jul 26 17:39:49 ahh kernel: usb.c: new USB bus registered, assigned bus number 1
> Jul 26 17:39:49 ahh kernel: usb.c: USB new device connect, assigned device number 1
> Jul 26 17:39:49 ahh kernel: usb.c: kmalloc IF c7cc0860, numif 1
> Jul 26 17:39:49 ahh kernel: usb.c: new device strings: Mfr=0, Product=2,
>SerialNumber=1
> Jul 26 17:39:49 ahh kernel: usb.c: USB device number 1 default language ID 0x0
> Jul 26 17:39:49 ahh kernel: Product: USB UHCI Root Hub
> Jul 26 17:39:49 ahh kernel: SerialNumber: 4000
> Jul 26 17:39:49 ahh kernel: hub.c: USB hub found
> Jul 26 17:39:49 ahh kernel: hub.c: 2 ports detected
> Jul 26 17:39:49 ahh kernel: hub.c: ganged power switching
> Jul 26 17:39:49 ahh kernel: hub.c: standalone hub
> Jul 26 17:39:49 ahh kernel: hub.c: global over-current protection
> Jul 26 17:39:49 ahh kernel: hub.c: power on to power good time: 2ms
> Jul 26 17:39:49 ahh kernel: hub.c: hub controller current requirement: 0mA
> Jul 26 17:39:49 ahh kernel: hub.c: port 1 is removable
> Jul 26 17:39:49 ahh kernel: hub.c: port 2 is removable
> Jul 26 17:39:49 ahh kernel: hub.c: local power source is good
> Jul 26 17:39:49 ahh kernel: hub.c: no over-current condition exists
> Jul 26 17:39:49 ahh kernel: hub.c: enabling power on all ports
> Jul 26 17:39:49 ahh kernel: usb.c: hub driver claimed interface c7cc0860
> Jul 26 17:39:49 ahh kernel: hub.c: port 1 connection change
> Jul 26 17:39:49 ahh kernel: usb.c: registered new driver usb-storage
> Jul 26 17:39:49 ahh kernel: USB Mass Storage support registered.
> Jul 26 17:39:49 ahh kernel: hub.c: portstatus 101, change 1, 12 Mb/s
> Jul 26 17:39:49 ahh kernel: hub.c: portstatus 103, change 0, 12 Mb/s
> Jul 26 17:39:49 ahh kernel: usb.c: USB new device connect, assigned device number 2
> Jul 26 17:39:49 ahh kernel: usb.c: kmalloc IF c7cc0a00, numif 1
> Jul 26 17:39:49 ahh kernel: usb.c: new device strings: Mfr=1, Product=2,
>SerialNumber=0
> Jul 26 17:39:49 ahh kernel: usb.c: USB device number 2 default language ID 0x409
> Jul 26 17:39:49 ahh kernel: Manufacturer: Sony
> Jul 26 17:39:49 ahh kernel: Product: Sony DSC
> Jul 26 17:39:49 ahh kernel: usb-storage: Searching unusual device list for (0x54c,
>0x10, 0x210)...
> Jul 26 17:39:49 ahh kernel: usb-storage: -- found matching device: Sony DSC-S30/S70
> Jul 26 17:39:49 ahh kernel: usb-storage: USB Mass Storage device detected
> Jul 26 17:39:49 ahh kernel: usb-storage: Endpoints: In: 0xc7cfefb1 Out: 0xc7cfefa0
>Int: 0xc7cfefc2 (Period 255)
> Jul 26 17:39:49 ahh kernel: usb-storage: Result from usb_set_interface is 0
> Jul 26 17:39:49 ahh kernel: usb-storage: New GUID 054c00100000000000000000
> Jul 26 17:39:49 ahh kernel: usb-storage: Transport: Control/Bulk
> Jul 26 17:39:49 ahh kernel: usb-storage: Protocol: Transparent SCSI
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: scsi0 : SCSI emulation for USB Mass Storage devices
> Jul 26 17:39:49 ahh kernel: scsi : 1 host.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Command INQUIRY (6 bytes)
> Jul 26 17:39:49 ahh kernel: usb-storage: 12 00 00 00 ff 00 83 c8 01 00 00 00
> Jul 26 17:39:49 ahh kernel: usb-storage: Call to usb_stor_control_msg() returned 6
> Jul 26 17:39:49 ahh kernel: usb-storage: us_transfer_partial(): xfer 256 bytes
> Jul 26 17:39:49 ahh kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred
>72/256
> Jul 26 17:39:49 ahh kernel: usb-storage: CB data stage result is 0x1
> Jul 26 17:39:49 ahh kernel: usb-storage: -- CB transport device requiring auto-sense
> Jul 26 17:39:49 ahh kernel: usb-storage: Issuing auto-REQUEST_SENSE
> Jul 26 17:39:49 ahh kernel: usb-storage: Call to usb_stor_control_msg() returned 6
> Jul 26 17:39:49 ahh kernel: usb-storage: us_transfer_partial(): xfer 18 bytes
> Jul 26 17:39:49 ahh kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
> Jul 26 17:39:49 ahh kernel: usb-storage: us_transfer_partial(): transfer complete
> Jul 26 17:39:49 ahh kernel: usb-storage: CB data stage result is 0x0
> Jul 26 17:39:49 ahh kernel: usb-storage: -- Result from auto-sense is 0
> Jul 26 17:39:49 ahh kernel: usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0
> Jul 26 17:39:49 ahh kernel: usb-storage: Fixing INQUIRY data, setting SCSI rev to 2
> Jul 26 17:39:49 ahh kernel: usb-storage: scsi cmd done, result=0x0
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: Vendor: Sony Model: Sony DSC Rev: 2.10
> Jul 26 17:39:49 ahh kernel: Type: Direct-Access ANSI SCSI
>revision: 02
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (0/1)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (1/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (2/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (3/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (4/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (5/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (6/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: usb-storage: queuecommand() called
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread awakened.
> Jul 26 17:39:49 ahh kernel: usb-storage: Bad device number (7/0)
> Jul 26 17:39:49 ahh kernel: usb-storage: *** thread sleeping.
> Jul 26 17:39:49 ahh kernel: WARNING: USB Mass Storage data integrity not assured
> Jul 26 17:39:49 ahh kernel: USB Mass Storage device found at 2
> Jul 26 17:39:49 ahh kernel: usb.c: usb-storage driver claimed interface c7cc0a00
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
--
Matthew Dharm Home: [EMAIL PROTECTED]
Senior Engineer, QCP Inc. Work: [EMAIL PROTECTED]
Stef, you just got beaten by a ball of DIRT.
-- Greg
User Friendly, 12/7/1997
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
